[PATCH v2 1/5] arm: dts: k3-binman: Use configs for ATF/OPTEE addresses

[Suhaas Joshi]

Instead of hard-coding ATF and OPTEE addresses in firewall configuration
templates, use K3_*_LOAD_ADDR. Doing so ensures that if someone moves
ATF/OPTEE regions, the change gets picked up by binman without
explicitly having to modify dts files.

Signed-off-by: Suhaas Joshi <s-joshi at ti.com>
---
 arch/arm/dts/k3-binman.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 761b1730464..0fd93f9536a 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -476,8 +476,8 @@
 		permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
 						FWPERM_SECURE_PRIV_RWCD |
 						FWPERM_SECURE_USER_RWCD)>;
-		start_address = <0x0 0x70000000>;
-		end_address = <0x0 0x7001ffff>;
+		start_address = <0x0 CONFIG_K3_ATF_LOAD_ADDR>;
+		end_address = <0x0 (CONFIG_K3_ATF_LOAD_ADDR + 0x1ffff)>;
 	};
 	firewall_armv8_optee_fg: template-8 {
 		control = <(FWCTRL_EN | FWCTRL_LOCK |
@@ -485,8 +485,8 @@
 		permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
 						FWPERM_SECURE_PRIV_RWCD |
 						FWPERM_SECURE_USER_RWCD)>;
-		start_address = <0x0 0x9e800000>;
-		end_address = <0x0 0x9fffffff>;
+		start_address = <0x0 CONFIG_K3_OPTEE_LOAD_ADDR>;
+		end_address = <0x0 (CONFIG_K3_OPTEE_LOAD_ADDR + 0x17fffff)>;
 	};
 
 	ti_falcon_template: template-9 {
-- 
2.34.1