[PATCH 3/3] imx93_evk: Enable AHAB_BOOT by default

[niko.mauno at vaisala.com]

From: Niko Mauno <niko.mauno at vaisala.com>

Enable the support for AHAB secure boot.

With this change, one can issue 'ahab_status' from U-Boot command line,
and see e.g. following kind of output:

  Lifecycle: 0x00000008, OEM Open

      0x0287eed6
      IPC = MU APD (0x2)
      CMD = ELE_OEM_CNTN_AUTH_REQ (0x87)
      IND = ELE_NO_AUTHENTICATION_FAILURE_IND (0xEE)
      STA = ELE_SUCCESS_IND (0xD6)

Suggested-by: Vesa Jääskeläinen <vesa.jaaskelainen at vaisala.com>
Signed-off-by: Niko Mauno <niko.mauno at vaisala.com>
---
 configs/imx93_11x11_evk_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig
index 7d3463a57ea..7cfdd402e64 100644
--- a/configs/imx93_11x11_evk_defconfig
+++ b/configs/imx93_11x11_evk_defconfig
@@ -11,6 +11,7 @@ CONFIG_ENV_OFFSET=0x700000
 CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx93-11x11-evk"
+CONFIG_AHAB_BOOT=y
 CONFIG_TARGET_IMX93_11X11_EVK=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_SERIAL=y
-- 
2.47.3