[PATCH 2/3] imx93_qsb: Enable AHAB_BOOT by default

[Niko Mauno]

On 1/22/26 3:33 AM, Ye Li wrote:
> 
> 
> On 1/22/2026 12:33 AM, niko.mauno at vaisala.com wrote:
>> [Some people who received this message don't often get email from niko.mauno at vaisala.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> From: Niko Mauno <niko.mauno at vaisala.com>
>>
>> Enable the support for AHAB secure boot.
>>
>> With this change, one can issue 'ahab_status' from U-Boot command line,
>> and see e.g. following kind of output:
>>
>>    Lifecycle: 0x00000008, OEM Open
>>
>>        0x0287eed6
>>        IPC = MU APD (0x2)
>>        CMD = ELE_OEM_CNTN_AUTH_REQ (0x87)
>>        IND = ELE_NO_AUTHENTICATION_FAILURE_IND (0xEE)
>>        STA = ELE_SUCCESS_IND (0xD6)
>>
> I don't agree to enable CONFIG_AHAB_BOOT by default. It is only for secure product for OEM closed LC and secure boot development in open.
> 
> Best regards,
> Ye Li>

Thank you, submitted v2 which contains only fix for imx93_qsb build error: https://lists.denx.de/pipermail/u-boot/2026-January/608341.html
-Niko