[PATCH] net: fec_mxc: Add support for i.MX91

[Primoz Fiser]

The i.MX91 SoC reuses the ENET FEC from i.MX93. Add all required driver
checks to make it work also on the i.MX91 based platforms.

Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 drivers/net/Kconfig   | 2 +-
 drivers/net/fec_mxc.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4fda1b0c28cf..eb6a1cab565d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -423,7 +423,7 @@ config FEC_MXC_MDIO_BASE
 
 config FEC_MXC
 	bool "FEC Ethernet controller"
-	depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX93 || VF610
+	depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || IMX91 || IMX93 || VF610
 	help
 	  This driver supports the 10/100 Fast Ethernet controller for
 	  NXP i.MX processors.
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index fee9973c4dc8..1c51e936b5be 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -594,7 +594,7 @@ static int fecmxc_init(struct udevice *dev)
 
 	/* Do not access reserved register */
 	if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m() && !is_imx8ulp() &&
-	    !is_imx93()) {
+	    !is_imx91() && !is_imx93()) {
 		/* clear MIB RAM */
 		for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
 			writel(0, i);
@@ -1236,7 +1236,7 @@ static int fecmxc_set_ref_clk(struct clk *clk_ref, phy_interface_t interface)
 		 interface == PHY_INTERFACE_MODE_RGMII_RXID ||
 		 interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 		freq = 125000000;
-		if (is_imx93())
+		if (is_imx91() || is_imx93())
 			freq = freq << 1;
 	} else {
 		return -EINVAL;
-- 
2.34.1