[Uboot-stm32] [PATCH] ARM: stm32: Use CONFIG_STM32MP15X to discern STM32MP15xx on DH STM32MP15xx DHSOM

[Patrice CHOTARD]

On 1/19/26 09:49, Patrice CHOTARD wrote:
> 
> 
> On 1/8/26 03:16, Marek Vasut wrote:
>> Use plain CONFIG_STM32MP15X to discern code which is specific to
>> STM32MP15xx in DH STM32MP1 DHSOM board files.
>>
>> Signed-off-by: Marek Vasut <marex at nabladev.com>
>> ---
>> Cc: Antonio Borneo <antonio.borneo at foss.st.com>
>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> Cc: Tom Rini <trini at konsulko.com>
>> Cc: u-boot at dh-electronics.com
>> Cc: u-boot at lists.denx.de
>> Cc: uboot-stm32 at st-md-mailman.stormreply.com
>> ---
>>  board/dhelectronics/dh_stm32mp1/board.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
>> index 55526189d5a..90590d14941 100644
>> --- a/board/dhelectronics/dh_stm32mp1/board.c
>> +++ b/board/dhelectronics/dh_stm32mp1/board.c
>> @@ -314,7 +314,7 @@ int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
>>  			return 0;
>>  	}
>>  
>> -	if (IS_ENABLED(CONFIG_TARGET_DH_STM32MP15X)) {
>> +	if (IS_ENABLED(CONFIG_STM32MP15X)) {
>>  		if (ddr3code == 1 &&
>>  		    !strcmp(name, "st,ddr3l-dhsom-1066-888-bin-g-2x1gb-533mhz"))
>>  			return 0;
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> 
> Thanks
> Patrice

Applied to u-boot-stm32/master

Thanks
Patrice

> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32