[PATCH 2/3] configs: am62ax_evm_a53_ethboot: Enable config options required to enable Ethernet boot

[Chintan Vankar]

Hello Andrew, Vignesh,

Let me know if I can enable config options required for A53 stage in the
base file since A53 SPL size is more than R5 SPL stage.

Regards,
Chintan.

On 02/07/26 13:42, Chintan Vankar wrote:
> Enable config options required to enable Ethernet boot on SK-AM62A-LP.
> 
> Signed-off-by: Chintan Vankar <c-vankar at ti.com>
> ---
>   configs/am62ax_evm_a53_ethboot_defconfig | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
>   create mode 100644 configs/am62ax_evm_a53_ethboot_defconfig
> 
> diff --git a/configs/am62ax_evm_a53_ethboot_defconfig b/configs/am62ax_evm_a53_ethboot_defconfig
> new file mode 100644
> index 00000000000..a64542315fe
> --- /dev/null
> +++ b/configs/am62ax_evm_a53_ethboot_defconfig
> @@ -0,0 +1,16 @@
> +#include <configs/am62ax_evm_a53_defconfig>
> +
> +CONFIG_ARM=y
> +CONFIG_ARCH_K3=y
> +CONFIG_SOC_K3_AM62A7=y
> +CONFIG_TARGET_AM62A7_A53_EVM=y
> +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk"
> +CONFIG_SPL_STACK_R_ADDR=0x82000000
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_DMA=y
> +CONFIG_SPL_ENV_SUPPORT=y
> +CONFIG_SPL_ETH=y
> +CONFIG_SPL_NET=y
> +CONFIG_SPL_NET_VCI_STRING="AM62AX U-Boot A53 SPL"
> +CONFIG_SPL_SYSCON=y