[PATCH 6/6] k3-binman.dtsi: insert keyfile and distinguished name templates in all ti-secure(-rom) nodes

[Rasmus Villemoes]

This should not make any functional difference, and downstream boards
that already override the keyfile property via an explicit .dtsi
fragment for each node will continue to have precedence over the value
coming from the template. But this makes it much more ergonomic to
have the keyfile and distinguished-name have consistent values
throughout, because one only has to override the values in the
templates and not each and every individual node.

Signed-off-by: Rasmus Villemoes <ravi at prevas.dk>
---
 arch/arm/dts/k3-binman.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 2c9e5b619b7..aca243f72f2 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -150,8 +150,8 @@
 					arch = "arm";
 					compression = "none";
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&board_cfg>;
-						keyfile = "custMpk.pem";
 					};
 					board_cfg: board-cfg {
 						filename = "board-cfg.bin";
@@ -165,8 +165,8 @@
 					arch = "arm";
 					compression = "none";
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&pm_cfg>;
-						keyfile = "custMpk.pem";
 					};
 					pm_cfg: pm-cfg {
 						filename = "pm-cfg.bin";
@@ -179,8 +179,8 @@
 					arch = "arm";
 					compression = "none";
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&rm_cfg>;
-						keyfile = "custMpk.pem";
 					};
 					rm_cfg: rm-cfg {
 						filename = "rm-cfg.bin";
@@ -193,8 +193,8 @@
 					arch = "arm";
 					compression = "none";
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&sec_cfg>;
-						keyfile = "custMpk.pem";
 					};
 					sec_cfg: sec-cfg {
 						filename = "sec-cfg.bin";
@@ -287,8 +287,8 @@
 					load = <CONFIG_K3_ATF_LOAD_ADDR>;
 					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&atf>;
-						keyfile = "custMpk.pem";
 					};
 					atf: atf-bl31 {
 					};
@@ -303,8 +303,8 @@
 					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&tee>;
-						keyfile = "custMpk.pem";
 					};
 					tee: tee-os {
 						optional;
@@ -330,8 +330,8 @@
 					load = <CONFIG_SPL_TEXT_BASE>;
 					entry = <CONFIG_SPL_TEXT_BASE>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&u_boot_spl_nodtb>;
-						keyfile = "custMpk.pem";
 
 					};
 					u_boot_spl_nodtb: blob-ext {
@@ -419,8 +419,8 @@
 					compression = "none";
 					load = <CONFIG_TEXT_BASE>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&u_boot_nodtb>;
-						keyfile = "custMpk.pem";
 					};
 					u_boot_nodtb: u-boot-nodtb {
 					};
@@ -521,8 +521,8 @@
 					load = <CONFIG_K3_ATF_LOAD_ADDR>;
 					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&atf_falcon>;
-						keyfile = "custMpk.pem";
 					};
 					atf_falcon: atf-bl31 {
 					};
@@ -536,8 +536,8 @@
 					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
 					ti-secure {
+						insert-template = <&keyfile_template>, <&distinguished_name_template>;
 						content = <&tee_falcon>;
-						keyfile = "custMpk.pem";
 					};
 					tee_falcon: tee-os {
 						optional;
-- 
2.55.0