[PATCH 08/11] Kconfig: i2c: Depend on correct xPL symbol

[Tom Rini]

On Fri, Jul 10, 2026 at 05:39:08PM +0200, Jonas Karlman wrote:
> Hi Tom,
> 
> On 7/10/2026 3:50 PM, Tom Rini wrote:
> > On Thu, Jul 09, 2026 at 09:12:24AM +0200, Jonas Karlman wrote:
> >> Hi Tom,
> >>
> >> On 7/9/2026 3:52 AM, Tom Rini wrote:
> >>> On Wed, Jul 08, 2026 at 10:05:34PM +0000, Jonas Karlman wrote:
> >>>
> >>>> Change to depend on the xPL symbol instead of the SUPPORT_xPL symbol to
> >>>> only make the xPL_SYS_I2C_LEGACY symbols available when xPL is enabled.
> >>>>
> >>>> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> >>>> ---
> >>>>  drivers/i2c/Kconfig | 4 ++--
> >>>>  1 file changed, 2 insertions(+), 2 deletions(-)
> >>>>
> >>>> diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
> >>>> index ab5af17858c8..125dc84819e6 100644
> >>>> --- a/drivers/i2c/Kconfig
> >>>> +++ b/drivers/i2c/Kconfig
> >>>> @@ -78,14 +78,14 @@ config SYS_I2C_LEGACY
> >>>>  
> >>>>  config SPL_SYS_I2C_LEGACY
> >>>>  	bool "Enable legacy I2C subsystem and drivers in SPL"
> >>>> -	depends on SUPPORT_SPL && !SPL_DM_I2C
> >>>> +	depends on SPL && !SPL_DM_I2C
> >>>>  	help
> >>>>  	  Enable the legacy I2C subsystem and drivers in SPL.  This is useful
> >>>>  	  in some size constrained situations.
> >>>>  
> >>>>  config TPL_SYS_I2C_LEGACY
> >>>>  	bool "Enable legacy I2C subsystem and drivers in TPL"
> >>>> -	depends on SUPPORT_TPL && !SPL_DM_I2C
> >>>> +	depends on TPL && !TPL_DM_I2C
> >>>>  	help
> >>>>  	  Enable the legacy I2C subsystem and drivers in TPL.  This is useful
> >>>>  	  in some size constrained situations.
> >>>
> >>> Building on the last email, I think these might need to be
> >>> [ST]PL_FRAMEWORK not [ST]PL.
> >>>
> >>
> >> I have mostly tested this series with additional changes that alias
> >> putc()/puts() to printch()/printascii() in xPL builds when
> >> common/console.o is unavailable and DEBUG_UART=y, patches that will
> >> be sent as a separate series.
> >>
> >> It is possible such change may have hidden some latent issues, now
> >> trying to push a branch that contains changes that ends at the patches
> >> included in this series, but due to timeouts it was not possible prior
> >> to sending this reply.
> >>
> >> This patch can also be dropped if it causes any issues, I only added it
> >> after a search for SUPPORT_xPL and noticed that these depends seem to be
> >> incorrect. SUPPORT_xPL is used to tell if xPL can be enabled or not,
> >> not if xPL is enabled/disabled.
> > 
> > I don't want to drop this, but there are a handful of platforms that
> > change:
> > 10: Kconfig: i2c: Depend on correct xPL symbol
> >    aarch64: (for 1/1 boards) all -60.0 text -60.0
> >             ls1043aqds_tfa : all -60 text -60
> >                u-boot: add: 0/-1, grow: 0/-1 bytes: 0/-60 (-60)
> >                  function                                   old     new   delta
> >                  board_early_init_f                          68      64      -4
> >                  i2c_early_init_f                            56       -     -56
> > 
> > Can you please look in to it and see what needs to be changed? Thanks.
> 
> From a quick look this size change may be caused due to use of an
> 'imply SPL_SYS_I2C_LEGACY' instead of using an 'imply SYS_I2C_LEGACY'
> in arch/arm/cpu/armv8/fsl-layerscape/Kconfig.
> 
> 'config MACH_SUN8I_R40' is another platform that also possible miss
> an 'imply SYS_I2C_LEGACY' to match other similar sunxi platforms.
> 
> Building this target I also noticed some more SPL_<name> symbols that
> may be missing a 'depends on SPL':
> 
>   > grep CONFIG_SPL .config
>   # CONFIG_SPL_SYS_L2_PL310 is not set
>   # CONFIG_SPL is not set
>   # CONFIG_SPL_SYS_STDIO_DEREGISTER is not set
>   # CONFIG_SPL_NVMEM is not set
>   CONFIG_SPL_SYS_NAND_SELF_INIT=y
>   # CONFIG_SPL_PHY_ATHEROS is not set
>   # CONFIG_SPL_PHY_TI_DP83867 is not set
>   # CONFIG_SPL_LZMA_SIZE_OPTIMIZATION is not set
> 
> Should possible add 'depends on' to some of them in a v2.

Great, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20260710/a7ea378c/attachment.sig>