[PATCH v1] serial: msm-geni: configure RX watermark register

[Casey Connolly]

On Tue, 21 Apr 2026 10:15:55 +0530, Gurumoorthy Santhakumar wrote:
> The SE_GENI_RX_WATERMARK_REG was not being programmed in the RX
> setup paths. Set it to DEF_RX_WM (2) in qcom_geni_serial_start_rx(),
> msm_geni_serial_setup_rx() and _debug_uart_init() to align with the
> Linux kernel driver behaviour.
> 
> Without this, the RX FIFO watermark interrupt threshold is left at
> its hardware reset value, which may differ from the expected value
> and can cause RX data loss or missed watermark interrupts.
> 
> [...]

Applied, thanks!

[1/1] serial: msm-geni: configure RX watermark register
      https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/5f171c622479

Best regards,
-- 
// Casey (she/they)