[RFC PATCH v2 09/64] usb: dwc3: import from kernel v4.6
Jens Wiklander
jens.wiklander at linaro.org
Thu May 7 11:27:16 CEST 2026
Sync Linux kernel dwc3 changes from v4.5 to v4.6.
The following files are preserved accross the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c
Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c
Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.
List of commits: git log --oneline v4.5..v4.6
Commits imported:
9772b47a4c29 usb: dwc3: gadget: Fix suspend/resume during device mode
e6bdf8195b4a usb: dwc3: fix memory leak of dwc->regset
5c4ad318de3b usb: dwc3: core: fix PHY handling during suspend
45d49cb706e5 usb: dwc3: omap: fix up error path on probe()
adf9a3ab90eb usb: dwc3: keystone: drop dma_mask configuration
1ffb4d5cc78a usb: dwc3: pci: add ID for one more Intel Broxton platform
e901aa159dac usb: dwc3: gadget: fix endpoint renaming
ad14d4e0308a usb: dwc3: gadget: release spin lock during gadget resume
f59dcab17629 usb: dwc3: core: improve reset sequence
33c1f638a0fe Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
77966eb85e6d usb: dwc3: Validate the maximum_speed parameter
7580862b3e80 usb: dwc3: Enable SuperSpeedPlus
2c7f1bd9127a usb: dwc3: Update maximum_speed for SuperSpeedPlus
ee5cd41c9117 usb: dwc3: Update speed checks for SuperSpeedPlus
1f38f88a24c8 usb: dwc3: Update register fields for SuperSpeedPlus
c4137a9c841e usb: dwc3: DWC_usb31 controller check
71e41bbb4379 Merge 4.5-rc6 into usb-next
3d755dcc20dd usb: dwc3: Remove impossible check for of_clk_get_parent_count() < 0
172ad9af55d2 Merge 4.5-rc4 into usb-next
Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
---
drivers/usb/dwc3/core.c | 102 +++++++++++++++++++++++++-------------
drivers/usb/dwc3/core.h | 11 +++-
drivers/usb/dwc3/ep0.c | 9 ++--
drivers/usb/dwc3/gadget.c | 47 ++++++++++++++----
4 files changed, 119 insertions(+), 50 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index de5e01f41bc2..34277ced26bd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -67,23 +67,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
static int dwc3_core_soft_reset(struct dwc3 *dwc)
{
u32 reg;
+ int retries = 1000;
int ret;
- /* Before Resetting PHY, put Core in Reset */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg |= DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-
- /* Assert USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
-
- /* Assert USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
-
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
ret = phy_init(dwc->usb2_generic_phy);
@@ -95,26 +81,28 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
phy_exit(dwc->usb2_generic_phy);
return ret;
}
- mdelay(100);
- /* Clear USB3 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ /*
+ * We're resetting only the device side because, if we're in host mode,
+ * XHCI driver will reset the host block. If dwc3 was configured for
+ * host-only mode, then we can return early.
+ */
+ if (dwc->dr_mode == USB_DR_MODE_HOST)
+ return 0;
- /* Clear USB2 PHY reset */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= DWC3_DCTL_CSFTRST;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
- mdelay(100);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ return 0;
- /* After PHYs are stable we can take Core out of reset state */
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg &= ~DWC3_GCTL_CORESOFTRESET;
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+ udelay(1);
+ } while (--retries);
- return 0;
+ return -ETIMEDOUT;
}
/**
@@ -962,10 +950,6 @@ static int dwc3_probe(struct platform_device *pdev)
fladj = pdata->fladj_value;
}
- /* default to superspeed if no maximum_speed passed */
- if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
- dwc->maximum_speed = USB_SPEED_SUPER;
-
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1016,6 +1000,33 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
+ /* Check the maximum_speed parameter */
+ switch (dwc->maximum_speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ break;
+ default:
+ dev_err(dev, "invalid maximum_speed parameter %d\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default to superspeed */
+ dwc->maximum_speed = USB_SPEED_SUPER;
+
+ /*
+ * default to superspeed plus if we are capable.
+ */
+ if (dwc3_is_usb31(dwc) &&
+ (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+ DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+
+ break;
+ }
+
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc, fladj);
@@ -1139,6 +1150,11 @@ static int dwc3_suspend(struct device *dev)
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
+ WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
+
pinctrl_pm_select_sleep_state(dev);
return 0;
@@ -1152,11 +1168,21 @@ static int dwc3_resume(struct device *dev)
pinctrl_pm_select_default_state(dev);
+ usb_phy_set_suspend(dwc->usb2_phy, 0);
+ usb_phy_set_suspend(dwc->usb3_phy, 0);
+ ret = phy_power_on(dwc->usb2_generic_phy);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_power_on(dwc->usb3_generic_phy);
+ if (ret < 0)
+ goto err_usb2phy_power;
+
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
if (ret < 0)
- return ret;
+ goto err_usb3phy_power;
ret = phy_init(dwc->usb3_generic_phy);
if (ret < 0)
@@ -1189,6 +1215,12 @@ static int dwc3_resume(struct device *dev)
err_usb2phy_init:
phy_exit(dwc->usb2_generic_phy);
+err_usb3phy_power:
+ phy_power_off(dwc->usb3_generic_phy);
+
+err_usb2phy_power:
+ phy_power_off(dwc->usb2_generic_phy);
+
return ret;
}
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e4f8b90d9627..6254b2ff9080 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -223,7 +223,8 @@
/* Global HWPARAMS3 Register */
#define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
-#define DWC3_GHWPARAMS3_SSPHY_IFC_ENA 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
#define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
@@ -249,6 +250,7 @@
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
#define DWC3_DCFG_SPEED_MASK (7 << 0)
+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DCFG_SUPERSPEED (4 << 0)
#define DWC3_DCFG_HIGHSPEED (0 << 0)
#define DWC3_DCFG_FULLSPEED2 (1 << 0)
@@ -339,6 +341,7 @@
#define DWC3_DSTS_CONNECTSPD (7 << 0)
+#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
#define DWC3_DSTS_SUPERSPEED (4 << 0)
#define DWC3_DSTS_HIGHSPEED (0 << 0)
#define DWC3_DSTS_FULLSPEED2 (1 << 0)
@@ -1024,6 +1027,12 @@ struct dwc3_gadget_ep_cmd_params {
void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
+/* check whether we are on the DWC_usb31 core */
+static inline bool dwc3_is_usb31(struct dwc3 *dwc)
+{
+ return !!(dwc->revision & DWC3_REVISION_IS_DWC31);
+}
+
#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
int dwc3_host_init(struct dwc3 *dwc);
void dwc3_host_exit(struct dwc3 *dwc);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 8d6b75c2f53b..eca2e6d8e041 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -356,7 +356,8 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
*/
usb_status |= dwc->gadget.is_selfpowered;
- if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+ if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
+ (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (reg & DWC3_DCTL_INITU1ENA)
usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
@@ -426,7 +427,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U1_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -440,7 +442,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
case USB_DEVICE_U2_ENABLE:
if (state != USB_STATE_CONFIGURED)
return -EINVAL;
- if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+ (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2363bad45af8..8e4a1b195e9b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -463,7 +463,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed == USB_SPEED_SUPER) {
+ if (dwc->gadget.speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst - 1;
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
@@ -568,7 +568,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
if (!usb_endpoint_xfer_isoc(desc))
- return 0;
+ goto out;
/* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
@@ -582,9 +582,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
+out:
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- strlcat(dep->name, "-control", sizeof(dep->name));
+ /* don't change name */
break;
case USB_ENDPOINT_XFER_ISOC:
strlcat(dep->name, "-isoc", sizeof(dep->name));
@@ -1441,7 +1442,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
- if (speed == DWC3_DSTS_SUPERSPEED) {
+ if ((speed == DWC3_DSTS_SUPERSPEED) ||
+ (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
ret = -EINVAL;
goto out;
@@ -1666,10 +1668,16 @@ static int dwc3_gadget_start(struct usb_gadget *g,
case USB_SPEED_HIGH:
reg |= DWC3_DSTS_HIGHSPEED;
break;
- case USB_SPEED_SUPER: /* FALLTHROUGH */
- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
+ case USB_SPEED_SUPER_PLUS:
+ reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+ break;
default:
- reg |= DWC3_DSTS_SUPERSPEED;
+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
}
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2340,7 +2348,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
* this. Maybe it becomes part of the power saving plan.
*/
- if (speed != DWC3_DSTS_SUPERSPEED)
+ if ((speed != DWC3_DSTS_SUPERSPEED) &&
+ (speed != DWC3_DSTS_SUPERSPEED_PLUS))
return;
/*
@@ -2369,6 +2378,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_update_ram_clk_sel(dwc, speed);
switch (speed) {
+ case DWC3_DCFG_SUPERSPEED_PLUS:
+ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+ dwc->gadget.ep0->maxpacket = 512;
+ dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ break;
case DWC3_DCFG_SUPERSPEED:
/*
* WORKAROUND: DWC3 revisions <1.90a have an issue which
@@ -2410,8 +2424,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
/* Enable USB2 LPM Capability */
- if ((dwc->revision > DWC3_REVISION_194A)
- && (speed != DWC3_DCFG_SUPERSPEED)) {
+ if ((dwc->revision > DWC3_REVISION_194A) &&
+ (speed != DWC3_DCFG_SUPERSPEED) &&
+ (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg |= DWC3_DCFG_LPM_CAP;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2473,7 +2488,11 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
* implemented.
*/
- dwc->gadget_driver->resume(&dwc->gadget);
+ if (dwc->gadget_driver && dwc->gadget_driver->resume) {
+ spin_unlock(&dwc->lock);
+ dwc->gadget_driver->resume(&dwc->gadget);
+ spin_lock(&dwc->lock);
+ }
}
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
@@ -2917,6 +2936,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
int dwc3_gadget_suspend(struct dwc3 *dwc)
{
+ if (!dwc->gadget_driver)
+ return 0;
+
if (dwc->pullups_connected) {
dwc3_gadget_disable_irq(dwc);
dwc3_gadget_run_stop(dwc, true, true);
@@ -2935,6 +2957,9 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
struct dwc3_ep *dep;
int ret;
+ if (!dwc->gadget_driver)
+ return 0;
+
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
--
2.43.0
More information about the U-Boot
mailing list