[RFC PATCH v2 28/64] usb: dwc3: import from kernel v5.4
Jens Wiklander
jens.wiklander at linaro.org
Thu May 7 11:27:35 CEST 2026
Sync Linux kernel dwc3 changes from v5.3 to v5.4.
The following files are preserved accross the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c
Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c
Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.
List of commits: git log --oneline v5.3..v5.4
Commits imported:
d8eca64eec71 usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
a7d9874c6f3f usb: dwc3: remove the call trace of USBx_GFLADJ
9bbfceea12a8 usb: dwc3: pci: prevent memory leak in dwc3_pci_probe
a51bab592fbb usb: dwc3: select CONFIG_REGMAP_MMIO
d819f6584c20 usb: dwc3: Remove dev_err() on platform_get_irq() failure
f146b40ba1f0 usb: dwc3: Switch to platform_get_irq_byname_optional()
a0a465569b45 usb: dwc3: remove generic PHY calibrate() calls
96e46dcfb853 Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
17b63704ec7c usb: dwc3: gadget: Workaround Mirosoft's BESL check
91f255a26bce usb: common: Separated decoding functions from dwc3 driver.
54fb5ba647f8 usb: dwc3: gadget: Set BESL config parameter
16fe4f304015 usb: dwc3: Separate field holding multiple properties
1cf084d161f4 usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
bceb418b65b9 usb: dwc3: st: Add of_dev_put() in probe function
e36721b90144 usb: dwc3: st: Add of_node_put() before return in probe function
c09b73cfac2a usb: dwc3: don't set gadget->is_otg flag
240b65dc1e89 usb: dwc3: Use clk_bulk_prepare_enable()
03bf32bbb607 usb: dwc3: Use devres to get clocks
3cd703f483d1 usb: dwc3: remove generic PHYs forwarding for XHCI device
4749e0e61241 usb: dwc3: Update soft-reset wait polling rate
b2a3974253d3 usb: dwc3: omap: squash include/linux/platform_data/dwc3-omap.h
a6e5e6794a53 usb: dwc3: Switch to use device_property_count_u32()
5b76f6a0b0f8 usb: dwc3: keystone: use devm_platform_ioremap_resource() to simplify code
58dd0bad2554 usb: dwc3: omap: use devm_platform_ioremap_resource() to simplify code
c6e4999cd930 usb: dwc3: meson-g12a: use devm_platform_ioremap_resource() to simplify code
d3523b631403 usb: dwc3: meson-g12a: use devm_platform_ioremap_resource() to simplify code
b33f37064b74 usb: Remove dev_err() usage after platform_get_irq()
41b57327b270 usb: dwc3: Switch to use device_property_count_u32()
Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
---
drivers/usb/dwc3/core.c | 64 +++++-----
drivers/usb/dwc3/core.h | 2 +
drivers/usb/dwc3/debug.h | 252 --------------------------------------
drivers/usb/dwc3/gadget.c | 37 ++++--
4 files changed, 60 insertions(+), 295 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c9bb93a2c81e..97d6ae3c4df2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -168,7 +168,6 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
- phy_calibrate(dwc->usb2_generic_phy);
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -252,12 +251,25 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
reg |= DWC3_DCTL_CSFTRST;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ /*
+ * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
+ * is cleared only after all the clocks are synchronized. This can
+ * take a little more than 50ms. Set the polling rate at 20ms
+ * for 10 times instead.
+ */
+ if (dwc3_is_usb31(dwc) && dwc->revision >= DWC3_USB31_REVISION_190A)
+ retries = 10;
+
do {
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (!(reg & DWC3_DCTL_CSFTRST))
goto done;
- udelay(1);
+ if (dwc3_is_usb31(dwc) &&
+ dwc->revision >= DWC3_USB31_REVISION_190A)
+ msleep(20);
+ else
+ udelay(1);
} while (--retries);
phy_exit(dwc->usb3_generic_phy);
@@ -267,11 +279,11 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
done:
/*
- * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared,
- * we must wait at least 50ms before accessing the PHY domain
- * (synchronization delay). DWC_usb31 programming guide section 1.3.2.
+ * For DWC_usb31 controller 1.80a and prior, once DCTL.CSFRST bit
+ * is cleared, we must wait at least 50ms before accessing the PHY
+ * domain (synchronization delay).
*/
- if (dwc3_is_usb31(dwc))
+ if (dwc3_is_usb31(dwc) && dwc->revision <= DWC3_USB31_REVISION_180A)
msleep(50);
return 0;
@@ -300,8 +312,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
dft = reg & DWC3_GFLADJ_30MHZ_MASK;
- if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
- "request value same as default, ignoring\n")) {
+ if (dft != dwc->fladj) {
reg &= ~DWC3_GFLADJ_30MHZ_MASK;
reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
@@ -686,8 +697,7 @@ static void dwc3_core_exit(struct dwc3 *dwc)
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
- clk_bulk_disable(dwc->num_clks, dwc->clks);
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
reset_control_assert(dwc->reset);
}
@@ -813,8 +823,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)
* result = 1, means INCRx burst mode supported.
* result > 1, means undefined length burst mode supported.
*/
- ntype = device_property_read_u32_array(dev,
- "snps,incr-burst-type-adjustment", NULL, 0);
+ ntype = device_property_count_u32(dev, "snps,incr-burst-type-adjustment");
if (ntype <= 0)
return;
@@ -1166,7 +1175,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
dev_err(dev, "failed to initialize host\n");
return ret;
}
- phy_calibrate(dwc->usb2_generic_phy);
break;
case USB_DR_MODE_OTG:
INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
@@ -1310,8 +1318,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
- dwc->hird_threshold = hird_threshold
- | (dwc->is_utmi_l1_suspend << 4);
+ dwc->hird_threshold = hird_threshold;
dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd;
dwc->rx_max_burst_prd = rx_max_burst_prd;
@@ -1436,7 +1443,7 @@ static int dwc3_probe(struct platform_device *pdev)
if (dev->of_node) {
dwc->num_clks = ARRAY_SIZE(dwc3_core_clks);
- ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks);
+ ret = devm_clk_bulk_get(dev, dwc->num_clks, dwc->clks);
if (ret == -EPROBE_DEFER)
return ret;
/*
@@ -1449,16 +1456,12 @@ static int dwc3_probe(struct platform_device *pdev)
ret = reset_control_deassert(dwc->reset);
if (ret)
- goto put_clks;
+ return ret;
- ret = clk_bulk_prepare(dwc->num_clks, dwc->clks);
+ ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
if (ret)
goto assert_reset;
- ret = clk_bulk_enable(dwc->num_clks, dwc->clks);
- if (ret)
- goto unprepare_clks;
-
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
@@ -1531,13 +1534,9 @@ err1:
pm_runtime_disable(&pdev->dev);
disable_clks:
- clk_bulk_disable(dwc->num_clks, dwc->clks);
-unprepare_clks:
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
reset_control_assert(dwc->reset);
-put_clks:
- clk_bulk_put(dwc->num_clks, dwc->clks);
return ret;
}
@@ -1560,7 +1559,6 @@ static int dwc3_remove(struct platform_device *pdev)
dwc3_free_event_buffers(dwc);
dwc3_free_scratch_buffers(dwc);
- clk_bulk_put(dwc->num_clks, dwc->clks);
return 0;
}
@@ -1574,14 +1572,10 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
if (ret)
return ret;
- ret = clk_bulk_prepare(dwc->num_clks, dwc->clks);
+ ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks);
if (ret)
goto assert_reset;
- ret = clk_bulk_enable(dwc->num_clks, dwc->clks);
- if (ret)
- goto unprepare_clks;
-
ret = dwc3_core_init(dwc);
if (ret)
goto disable_clks;
@@ -1589,9 +1583,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
return 0;
disable_clks:
- clk_bulk_disable(dwc->num_clks, dwc->clks);
-unprepare_clks:
- clk_bulk_unprepare(dwc->num_clks, dwc->clks);
+ clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks);
assert_reset:
reset_control_assert(dwc->reset);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 3dd783b889cb..1c8b349379af 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1137,6 +1137,8 @@ struct dwc3 {
#define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31)
#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31)
#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_180A (0x3138302a | DWC3_REVISION_IS_DWC31)
+#define DWC3_USB31_REVISION_190A (0x3139302a | DWC3_REVISION_IS_DWC31)
u32 version_type;
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 068259fdfb0c..9baabed87d61 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -246,258 +246,6 @@ static inline const char *dwc3_gadget_event_string(char *str, size_t size,
return str;
}
-static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str,
- size_t size)
-{
- switch (t & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- snprintf(str, size, "Get Device Status(Length = %d)", l);
- break;
- case USB_RECIP_INTERFACE:
- snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)",
- i, l);
- break;
- case USB_RECIP_ENDPOINT:
- snprintf(str, size, "Get Endpoint Status(ep%d%s)",
- i & ~USB_DIR_IN,
- i & USB_DIR_IN ? "in" : "out");
- break;
- }
-}
-
-static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
- __u16 i, char *str, size_t size)
-{
- switch (t & USB_RECIP_MASK) {
- case USB_RECIP_DEVICE:
- snprintf(str, size, "%s Device Feature(%s%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- ({char *s;
- switch (v) {
- case USB_DEVICE_SELF_POWERED:
- s = "Self Powered";
- break;
- case USB_DEVICE_REMOTE_WAKEUP:
- s = "Remote Wakeup";
- break;
- case USB_DEVICE_TEST_MODE:
- s = "Test Mode";
- break;
- case USB_DEVICE_U1_ENABLE:
- s = "U1 Enable";
- break;
- case USB_DEVICE_U2_ENABLE:
- s = "U2 Enable";
- break;
- case USB_DEVICE_LTM_ENABLE:
- s = "LTM Enable";
- break;
- default:
- s = "UNKNOWN";
- } s; }),
- v == USB_DEVICE_TEST_MODE ?
- ({ char *s;
- switch (i) {
- case TEST_J:
- s = ": TEST_J";
- break;
- case TEST_K:
- s = ": TEST_K";
- break;
- case TEST_SE0_NAK:
- s = ": TEST_SE0_NAK";
- break;
- case TEST_PACKET:
- s = ": TEST_PACKET";
- break;
- case TEST_FORCE_EN:
- s = ": TEST_FORCE_EN";
- break;
- default:
- s = ": UNKNOWN";
- } s; }) : "");
- break;
- case USB_RECIP_INTERFACE:
- snprintf(str, size, "%s Interface Feature(%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- v == USB_INTRF_FUNC_SUSPEND ?
- "Function Suspend" : "UNKNOWN");
- break;
- case USB_RECIP_ENDPOINT:
- snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)",
- b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set",
- v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN",
- i & ~USB_DIR_IN,
- i & USB_DIR_IN ? "in" : "out");
- break;
- }
-}
-
-static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Address(Addr = %02x)", v);
-}
-
-static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v,
- __u16 i, __u16 l, char *str, size_t size)
-{
- snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)",
- b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set",
- ({ char *s;
- switch (v >> 8) {
- case USB_DT_DEVICE:
- s = "Device";
- break;
- case USB_DT_CONFIG:
- s = "Configuration";
- break;
- case USB_DT_STRING:
- s = "String";
- break;
- case USB_DT_INTERFACE:
- s = "Interface";
- break;
- case USB_DT_ENDPOINT:
- s = "Endpoint";
- break;
- case USB_DT_DEVICE_QUALIFIER:
- s = "Device Qualifier";
- break;
- case USB_DT_OTHER_SPEED_CONFIG:
- s = "Other Speed Config";
- break;
- case USB_DT_INTERFACE_POWER:
- s = "Interface Power";
- break;
- case USB_DT_OTG:
- s = "OTG";
- break;
- case USB_DT_DEBUG:
- s = "Debug";
- break;
- case USB_DT_INTERFACE_ASSOCIATION:
- s = "Interface Association";
- break;
- case USB_DT_BOS:
- s = "BOS";
- break;
- case USB_DT_DEVICE_CAPABILITY:
- s = "Device Capability";
- break;
- case USB_DT_PIPE_USAGE:
- s = "Pipe Usage";
- break;
- case USB_DT_SS_ENDPOINT_COMP:
- s = "SS Endpoint Companion";
- break;
- case USB_DT_SSP_ISOC_ENDPOINT_COMP:
- s = "SSP Isochronous Endpoint Companion";
- break;
- default:
- s = "UNKNOWN";
- break;
- } s; }), v & 0xff, l);
-}
-
-
-static inline void dwc3_decode_get_configuration(__u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Get Configuration(Length = %d)", l);
-}
-
-static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Configuration(Config = %d)", v);
-}
-
-static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l);
-}
-
-static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size)
-{
- snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v);
-}
-
-static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str,
- size_t size)
-{
- snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l);
-}
-
-static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size)
-{
- snprintf(str, size, "Set SEL(Length = %d)", l);
-}
-
-static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size)
-{
- snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v);
-}
-
-/**
- * dwc3_decode_ctrl - returns a string represetion of ctrl request
- */
-static inline const char *dwc3_decode_ctrl(char *str, size_t size,
- __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex,
- __u16 wLength)
-{
- switch (bRequest) {
- case USB_REQ_GET_STATUS:
- dwc3_decode_get_status(bRequestType, wIndex, wLength, str,
- size);
- break;
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue,
- wIndex, str, size);
- break;
- case USB_REQ_SET_ADDRESS:
- dwc3_decode_set_address(wValue, str, size);
- break;
- case USB_REQ_GET_DESCRIPTOR:
- case USB_REQ_SET_DESCRIPTOR:
- dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue,
- wIndex, wLength, str, size);
- break;
- case USB_REQ_GET_CONFIGURATION:
- dwc3_decode_get_configuration(wLength, str, size);
- break;
- case USB_REQ_SET_CONFIGURATION:
- dwc3_decode_set_configuration(wValue, str, size);
- break;
- case USB_REQ_GET_INTERFACE:
- dwc3_decode_get_intf(wIndex, wLength, str, size);
- break;
- case USB_REQ_SET_INTERFACE:
- dwc3_decode_set_intf(wValue, wIndex, str, size);
- break;
- case USB_REQ_SYNCH_FRAME:
- dwc3_decode_synch_frame(wIndex, wLength, str, size);
- break;
- case USB_REQ_SET_SEL:
- dwc3_decode_set_sel(wLength, str, size);
- break;
- case USB_REQ_SET_ISOCH_DELAY:
- dwc3_decode_set_isoch_delay(wValue, str, size);
- break;
- default:
- snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
- bRequestType, bRequest,
- cpu_to_le16(wValue) & 0xff,
- cpu_to_le16(wValue) >> 8,
- cpu_to_le16(wIndex) & 0xff,
- cpu_to_le16(wIndex) >> 8,
- cpu_to_le16(wLength) & 0xff,
- cpu_to_le16(wLength) >> 8);
- }
-
- return str;
-}
-
/**
* dwc3_ep_event_string - returns event name
* @event: then event code
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 173f5329d3d9..a9aba716bf80 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -707,6 +707,12 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
+
+ while (!list_empty(&dep->cancelled_list)) {
+ req = next_request(&dep->cancelled_list);
+
+ dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ }
}
/**
@@ -2078,6 +2084,26 @@ static void dwc3_gadget_config_params(struct usb_gadget *g,
{
struct dwc3 *dwc = gadget_to_dwc(g);
+ params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED;
+ params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED;
+
+ /* Recommended BESL */
+ if (!dwc->dis_enblslpm_quirk) {
+ /*
+ * If the recommended BESL baseline is 0 or if the BESL deep is
+ * less than 2, Microsoft's Windows 10 host usb stack will issue
+ * a usb reset immediately after it receives the extended BOS
+ * descriptor and the enumeration will fail. To maintain
+ * compatibility with the Windows' usb stack, let's set the
+ * recommended BESL baseline to 1 and clamp the BESL deep to be
+ * within 2 to 15.
+ */
+ params->besl_baseline = 1;
+ if (dwc->is_utmi_l1_suspend)
+ params->besl_deep =
+ clamp_t(u8, dwc->hird_threshold, 2, 15);
+ }
+
/* U1 Device exit Latency */
if (dwc->dis_u1_entry_quirk)
params->bU1devExitLat = 0;
@@ -2868,7 +2894,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
- reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
+ reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold |
+ (dwc->is_utmi_l1_suspend << 4));
/*
* When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
@@ -3243,14 +3270,14 @@ static int dwc3_gadget_get_irq(struct dwc3 *dwc)
struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
int irq;
- irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
+ irq = platform_get_irq_byname_optional(dwc3_pdev, "peripheral");
if (irq > 0)
goto out;
if (irq == -EPROBE_DEFER)
goto out;
- irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+ irq = platform_get_irq_byname_optional(dwc3_pdev, "dwc_usb3");
if (irq > 0)
goto out;
@@ -3261,9 +3288,6 @@ static int dwc3_gadget_get_irq(struct dwc3 *dwc)
if (irq > 0)
goto out;
- if (irq != -EPROBE_DEFER)
- dev_err(dwc->dev, "missing peripheral IRQ\n");
-
if (!irq)
irq = -EINVAL;
@@ -3318,7 +3342,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
- dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG;
dwc->gadget.lpm_capable = true;
/*
--
2.43.0
More information about the U-Boot
mailing list