[RFC PATCH v2 34/64] usb: dwc3: import from kernel v5.10
Jens Wiklander
jens.wiklander at linaro.org
Thu May 7 11:27:41 CEST 2026
Sync Linux kernel dwc3 changes from v5.9 to v5.10.
The following files are preserved accross the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c
Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c
Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.
List of commits: git log --oneline v5.9..v5.10
Commits imported:
58d51f330e76 Merge tag 'fixes-for-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
cbdc0f54560f usb: fix kernel-doc markups
fa27e2f6c5e6 usb: dwc3: ep0: Fix delay status handling
1384ab4fee12 usb: dwc3: pci: add support for the Intel Alder Lake-S
e2c53515b2a6 usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform
e0a93d98f488 usb: dwc3: gadget: Support up to max stream id
2338484d14f3 usb: dwc3: gadget: Return early if no TRB update
346a15cdf652 usb: dwc3: gadget: Keep TRBs in request order
8dbbe48c7a99 usb: dwc3: gadget: Revise setting IOC when no TRB left
f9cc581badb1 usb: dwc3: gadget: Look ahead when setting IOC
d72ecc08dee4 usb: dwc3: gadget: Allow restarting a transfer
ae7e86108b12 usb: dwc3: Stop active transfers before halting the controller
f580170f135a usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
7f2958d9ad58 usb: dwc3: gadget: Rename misleading function names
cb1b3997b636 usb: dwc3: gadget: Refactor preparing last TRBs
30892cba5596 usb: dwc3: gadget: Set IOC if not enough for extra TRBs
490410b2e73c usb: dwc3: gadget: Check for number of TRBs prepared
13111fcb0d64 usb: dwc3: gadget: Return the number of prepared TRBs
66706077dc89 usb: dwc3: ep0: Fix ZLP for OUT ep0 requests
a2841f41d07f usb: dwc3: gadget: Improve TRB ZLP setup
2b80357b773c usb: dwc3: gadget: Refactor preparing extra TRB
690e5c2dc29f usb: dwc3: gadget: Reclaim extra TRBs after request completion
ca3df3468eec usb: dwc3: gadget: Check MPS of the request length
8266b08ed90c usb: dwc3: gadget: Refactor ep command completion
5bde3f020a15 usb: dwc3: debugfs: do not queue work if try to change mode on non-drd
03c1fd622f72 usb: dwc3: core: add phy cleanup for probe error handling
266d0493900a usb: dwc3: core: don't trigger runtime pm when remove driver
e81a7018d93a usb: dwc3: allocate gadget structure dynamically
a609ce2a1336 usb: dwc3: pci: Allow Elkhart Lake to utilize DSM method for PM functionality
65f3d449f438 usb: dwc-meson-g12a: Add support for USB on AXG SoCs
dc336b19e82d usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG
e319bd62292c usb: dwc3: gadget: fix checkpatch warnings
87b923a2e059 usb: dwc3: core: fix checkpatch warnings
9ae0eb455b91 usb: dwc3: debugfs: fix checkpatch warnings
993ffc5b32d2 usb: dwc3: qcom: fix checkpatch warnings
c64b475b8488 usb: dwc3: ep0: fix checkpatch warnings
035cbca1360a usb: dwc3: debug: fix checkpatch warning
159fdf295c67 usb: dwc3: trace: fix checkpatch warnings
2a499b452952 usb: dwc3: ulpi: fix checkpatch warning
e5ee93d42b3f usb: dwc3: meson: fix checkpatch errors and warnings
27c7ab0fdd0b usb: dwc3: debug: fix sparse warning
a793cf81ad0c usb: dwc3: meson: fix coccinelle WARNING
bea46b981515 usb: dwc3: qcom: Add interconnect support in dwc3 driver
e518bdd9f02c usb: dwc3: core: Print warning on unsupported speed
b574ce3ee459 usb: dwc3: core: Properly default unspecified speed
b68d9251561f usb: dwc3: simple: add support for Hikey 970
d97c78a1908e usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command
c503672abe13 usb: dwc3: gadget: Resume pending requests after CLEAR_STALL
Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
---
drivers/usb/dwc3/core.c | 92 ++++--
drivers/usb/dwc3/core.h | 49 ++--
drivers/usb/dwc3/debug.h | 8 +-
drivers/usb/dwc3/ep0.c | 62 ++--
drivers/usb/dwc3/gadget.c | 593 ++++++++++++++++++++++----------------
drivers/usb/dwc3/gadget.h | 3 +-
6 files changed, 499 insertions(+), 308 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2eb34c8b4065..841daec70b6e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* core.c - DesignWare USB3 DRD Controller Core file
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
@@ -119,9 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
-
- if (dwc->dr_mode != USB_DR_MODE_OTG)
- return;
+ u32 reg;
pm_runtime_get_sync(dwc->dev);
@@ -172,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -203,6 +206,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
unsigned long flags;
+ if (dwc->dr_mode != USB_DR_MODE_OTG)
+ return;
+
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode;
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -929,13 +935,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
- /* Handle USB2.0-only core configuration */
- if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
- if (dwc->maximum_speed == USB_SPEED_SUPER)
- dwc->maximum_speed = USB_SPEED_HIGH;
- }
-
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
@@ -1356,6 +1355,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1381,6 +1383,8 @@ bool dwc3_has_imod(struct dwc3 *dwc)
static void dwc3_check_params(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
+ unsigned int hwparam_gen =
+ DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
/* Check for proper value of imod_interval */
if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
@@ -1404,25 +1408,40 @@ static void dwc3_check_params(struct dwc3 *dwc)
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
+ break;
case USB_SPEED_SUPER:
+ if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS)
+ dev_warn(dev, "UDC doesn't support Gen 1\n");
+ break;
case USB_SPEED_SUPER_PLUS:
+ if ((DWC3_IP_IS(DWC32) &&
+ hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) ||
+ (!DWC3_IP_IS(DWC32) &&
+ hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dev_warn(dev, "UDC doesn't support SSP\n");
break;
default:
dev_err(dev, "invalid maximum_speed parameter %d\n",
dwc->maximum_speed);
fallthrough;
case USB_SPEED_UNKNOWN:
- /* default to superspeed */
- dwc->maximum_speed = USB_SPEED_SUPER;
-
- /*
- * default to superspeed plus if we are capable.
- */
- if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) &&
- (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ switch (hwparam_gen) {
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+ if (DWC3_IP_IS(DWC32))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+ else
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
+ dwc->maximum_speed = USB_SPEED_HIGH;
+ break;
+ default:
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ }
break;
}
}
@@ -1554,6 +1573,17 @@ static int dwc3_probe(struct platform_device *pdev)
err5:
dwc3_event_buffers_cleanup(dwc);
+
+ usb_phy_shutdown(dwc->usb2_phy);
+ usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
+
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);
+
dwc3_ulpi_exit(dwc);
err4:
@@ -1589,9 +1619,9 @@ static int dwc3_remove(struct platform_device *pdev)
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_allow(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
dwc3_free_event_buffers(dwc);
dwc3_free_scratch_buffers(dwc);
@@ -1865,10 +1895,26 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f04b3e42bf1..2f95f08ca511 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -138,6 +138,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -380,6 +381,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -634,7 +638,7 @@ struct dwc3_trb;
struct dwc3_event_buffer {
void *buf;
void *cache;
- unsigned length;
+ unsigned int length;
unsigned int lpos;
unsigned int count;
unsigned int flags;
@@ -694,7 +698,7 @@ struct dwc3_ep {
struct dwc3 *dwc;
u32 saved_state;
- unsigned flags;
+ unsigned int flags;
#define DWC3_EP_ENABLED BIT(0)
#define DWC3_EP_STALL BIT(1)
#define DWC3_EP_WEDGE BIT(2)
@@ -706,6 +710,7 @@ struct dwc3_ep {
#define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8)
#define DWC3_EP_FORCE_RESTART_STREAM BIT(9)
#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10)
+#define DWC3_EP_PENDING_CLEAR_STALL BIT(11)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN BIT(31)
@@ -893,9 +898,9 @@ struct dwc3_request {
struct scatterlist *sg;
struct scatterlist *start_sg;
- unsigned num_pending_sgs;
+ unsigned int num_pending_sgs;
unsigned int num_queued_sgs;
- unsigned remaining;
+ unsigned int remaining;
unsigned int status;
#define DWC3_REQUEST_STATUS_QUEUED 0
@@ -908,11 +913,11 @@ struct dwc3_request {
struct dwc3_trb *trb;
dma_addr_t trb_dma;
- unsigned num_trbs;
+ unsigned int num_trbs;
- unsigned needs_extra_trb:1;
- unsigned direction:1;
- unsigned mapped:1;
+ unsigned int needs_extra_trb:1;
+ unsigned int direction:1;
+ unsigned int mapped:1;
};
/*
@@ -1010,8 +1015,8 @@ struct dwc3_scratchpad_array {
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
- * 0 - utmi_sleep_n
- * 1 - utmi_l1_suspend_n
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
* @pending_events: true when we have pending IRQs to be handled
* @pullups_connected: true when Run/Stop bit is set
@@ -1047,13 +1052,14 @@ struct dwc3_scratchpad_array {
* instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
- * 0 - -6dB de-emphasis
- * 1 - -3.5dB de-emphasis
- * 2 - No de-emphasis
- * 3 - Reserved
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
- * increments or 0 to disable.
+ * increments or 0 to disable.
*/
struct dwc3 {
struct work_struct drd_work;
@@ -1079,7 +1085,7 @@ struct dwc3 {
struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
- struct usb_gadget gadget;
+ struct usb_gadget *gadget;
struct usb_gadget_driver *gadget_driver;
struct clk_bulk_data *clks;
@@ -1245,6 +1251,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
@@ -1269,7 +1277,7 @@ struct dwc3_event_type {
#define DWC3_DEPEVT_EPCMDCMPLT 0x07
/**
- * struct dwc3_event_depvt - Device Endpoint Events
+ * struct dwc3_event_depevt - Device Endpoint Events
* @one_bit: indicates this is an endpoint event (not used)
* @endpoint_number: number of the endpoint
* @endpoint_event: The event we have:
@@ -1456,9 +1464,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_get_link_state(struct dwc3 *dwc);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+ u32 param);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
{ return 0; }
@@ -1472,7 +1481,7 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
enum dwc3_link_state state)
{ return 0; }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params)
{ return 0; }
static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 3d16dac4e5cc..8ab394942360 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -371,7 +371,9 @@ static inline const char *dwc3_gadget_event_type_string(u8 event)
static inline const char *dwc3_decode_event(char *str, size_t size, u32 event,
u32 ep0state)
{
- const union dwc3_event evt = (union dwc3_event) event;
+ union dwc3_event evt;
+
+ memcpy(&evt, &event, sizeof(event));
if (evt.type.is_devspec)
return dwc3_gadget_event_string(str, size, &evt.devt);
@@ -411,8 +413,8 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
#ifdef CONFIG_DEBUG_FS
-extern void dwc3_debugfs_init(struct dwc3 *);
-extern void dwc3_debugfs_exit(struct dwc3 *);
+extern void dwc3_debugfs_init(struct dwc3 *d);
+extern void dwc3_debugfs_exit(struct dwc3 *d);
#else
static inline void dwc3_debugfs_init(struct dwc3 *d)
{ }
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 59f2e8c31bd1..8b668ef46f7f 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -105,7 +105,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
- unsigned direction;
+ unsigned int direction;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
@@ -127,11 +127,11 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* handle it here.
*/
if (dwc->delayed_status) {
- unsigned direction;
+ unsigned int direction;
direction = !dwc->ep0_expect_in;
dwc->delayed_status = false;
- usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
if (dwc->ep0state == EP0_STATUS_PHASE)
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
@@ -172,7 +172,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* XferNotReady(STATUS).
*/
if (dwc->three_stage_setup) {
- unsigned direction;
+ unsigned int direction;
direction = dwc->ep0_expect_in;
dwc->ep0state = EP0_DATA_PHASE;
@@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
spin_lock_irqsave(&dwc->lock, flags);
- if (!dep->endpoint.desc) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
ret = -ESHUTDOWN;
@@ -325,7 +325,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
/*
* LTM will be set once we know how to set this in HW.
*/
- usb_status |= dwc->gadget.is_selfpowered;
+ usb_status |= dwc->gadget->is_selfpowered;
if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
(dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
@@ -450,7 +450,7 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc,
wValue = le16_to_cpu(ctrl->wValue);
wIndex = le16_to_cpu(ctrl->wIndex);
- state = dwc->gadget.state;
+ state = dwc->gadget->state;
switch (wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
@@ -524,6 +524,11 @@ static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
ret = __dwc3_gadget_ep_set_halt(dep, set, true);
if (ret)
return -EINVAL;
+
+ /* ClearFeature(Halt) may need delayed status */
+ if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ return USB_GADGET_DELAYED_STATUS;
+
break;
default:
return -EINVAL;
@@ -559,7 +564,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u32 addr;
u32 reg;
@@ -580,9 +585,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
if (addr)
- usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
else
- usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
return 0;
}
@@ -592,14 +597,14 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
spin_unlock(&dwc->lock);
- ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
+ ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
spin_lock(&dwc->lock);
return ret;
}
static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u32 cfg;
int ret;
u32 reg;
@@ -622,7 +627,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
* to change the state on the next usb_ep_queue()
*/
if (ret == 0)
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
/*
@@ -641,7 +646,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
case USB_STATE_CONFIGURED:
ret = dwc3_ep0_delegate_req(dwc, ctrl);
if (!cfg && !ret)
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_ADDRESS);
break;
default:
@@ -697,7 +702,7 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u16 wLength;
if (state == USB_STATE_DEFAULT)
@@ -741,7 +746,7 @@ static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct
if (wIndex || wLength)
return -EINVAL;
- dwc->gadget.isoch_delay = wValue;
+ dwc->gadget->isoch_delay = wValue;
return 0;
}
@@ -942,12 +947,16 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req)
{
+ unsigned int trb_length = 0;
int ret;
req->direction = !!dep->number;
if (req->request.length == 0) {
- dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0,
+ if (!req->direction)
+ trb_length = dep->endpoint.maxpacket;
+
+ dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
DWC3_TRBCTL_CONTROL_DATA, false);
ret = dwc3_ep0_start_trans(dep);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
@@ -994,9 +1003,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+ if (!req->direction)
+ trb_length = dep->endpoint.maxpacket;
+
/* Now prepare one extra TRB to align transfer size */
dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
- 0, DWC3_TRBCTL_CONTROL_DATA,
+ trb_length, DWC3_TRBCTL_CONTROL_DATA,
false);
ret = dwc3_ep0_start_trans(dep);
} else {
@@ -1042,6 +1054,18 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
__dwc3_ep0_do_control_status(dwc, dep);
}
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
+{
+ unsigned int direction = !dwc->ep0_expect_in;
+
+ dwc->delayed_status = false;
+
+ if (dwc->ep0state != EP0_STATUS_PHASE)
+ return;
+
+ __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
+}
+
static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
@@ -1102,7 +1126,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
*/
if (!list_empty(&dep->pending_list)) {
dwc->delayed_status = false;
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
dwc3_ep0_do_control_status(dwc, event);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c2a0f64f8d1e..78cb4db8a6e4 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -227,7 +227,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
* Caller should take care of locking. Issue @cmd with a given @param to @dwc
* and wait for its completion.
*/
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+ u32 param)
{
u32 timeout = 500;
int status = 0;
@@ -268,7 +269,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
* Caller should handle locking. This function will issue @cmd with given
* @params to @dep and wait for its completion.
*/
-int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params)
{
const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
@@ -290,7 +291,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
*
* DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
*/
- if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+ if (dwc->gadget->speed <= USB_SPEED_HIGH) {
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
@@ -422,7 +423,7 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
*/
if (dep->direction &&
!DWC3_VER_IS_PRIOR(DWC3, 260A) &&
- (dwc->gadget.speed >= USB_SPEED_SUPER))
+ (dwc->gadget->speed >= USB_SPEED_SUPER))
cmd |= DWC3_DEPCMD_CLEARPENDIN;
memset(¶ms, 0, sizeof(params));
@@ -562,8 +563,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed >= USB_SPEED_SUPER) {
+ if (dwc->gadget->speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst;
+
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
}
@@ -942,12 +944,13 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
}
static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
- dma_addr_t dma, unsigned length, unsigned chain, unsigned node,
- unsigned stream_id, unsigned short_not_ok,
- unsigned no_interrupt, unsigned is_last)
+ dma_addr_t dma, unsigned int length, unsigned int chain,
+ unsigned int node, unsigned int stream_id,
+ unsigned int short_not_ok, unsigned int no_interrupt,
+ unsigned int is_last, bool must_interrupt)
{
struct dwc3 *dwc = dep->dwc;
- struct usb_gadget *gadget = &dwc->gadget;
+ struct usb_gadget *gadget = dwc->gadget;
enum usb_device_speed speed = gadget->speed;
trb->size = DWC3_TRB_SIZE_LENGTH(length);
@@ -1031,8 +1034,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
}
- if ((!no_interrupt && !chain) ||
- (dwc3_calc_trbs_left(dep) == 1))
+ if ((!no_interrupt && !chain) || must_interrupt)
trb->ctrl |= DWC3_TRB_CTRL_IOC;
if (chain)
@@ -1057,19 +1059,24 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
* @trb_length: buffer size of the TRB
* @chain: should this TRB be chained to the next?
* @node: only for isochronous endpoints. First TRB needs different type.
+ * @use_bounce_buffer: set to use bounce buffer
+ * @must_interrupt: set to interrupt on TRB completion
*/
static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
struct dwc3_request *req, unsigned int trb_length,
- unsigned chain, unsigned node)
+ unsigned int chain, unsigned int node, bool use_bounce_buffer,
+ bool must_interrupt)
{
struct dwc3_trb *trb;
dma_addr_t dma;
- unsigned stream_id = req->request.stream_id;
- unsigned short_not_ok = req->request.short_not_ok;
- unsigned no_interrupt = req->request.no_interrupt;
- unsigned is_last = req->request.is_last;
-
- if (req->request.num_sgs > 0)
+ unsigned int stream_id = req->request.stream_id;
+ unsigned int short_not_ok = req->request.short_not_ok;
+ unsigned int no_interrupt = req->request.no_interrupt;
+ unsigned int is_last = req->request.is_last;
+
+ if (use_bounce_buffer)
+ dma = dep->dwc->bounce_addr;
+ else if (req->request.num_sgs > 0)
dma = sg_dma_address(req->start_sg);
else
dma = req->request.dma;
@@ -1085,10 +1092,63 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
req->num_trbs++;
__dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node,
- stream_id, short_not_ok, no_interrupt, is_last);
+ stream_id, short_not_ok, no_interrupt, is_last,
+ must_interrupt);
}
-static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
+static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+ unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ unsigned int rem = req->request.length % maxp;
+
+ if ((req->request.length && req->request.zero && !rem &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc)) ||
+ (!req->direction && rem))
+ return true;
+
+ return false;
+}
+
+/**
+ * dwc3_prepare_last_sg - prepare TRBs for the last SG entry
+ * @dep: The endpoint that the request belongs to
+ * @req: The request to prepare
+ * @entry_length: The last SG entry size
+ * @node: Indicates whether this is not the first entry (for isoc only)
+ *
+ * Return the number of TRBs prepared.
+ */
+static int dwc3_prepare_last_sg(struct dwc3_ep *dep,
+ struct dwc3_request *req, unsigned int entry_length,
+ unsigned int node)
+{
+ unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ unsigned int rem = req->request.length % maxp;
+ unsigned int num_trbs = 1;
+
+ if (dwc3_needs_extra_trb(dep, req))
+ num_trbs++;
+
+ if (dwc3_calc_trbs_left(dep) < num_trbs)
+ return 0;
+
+ req->needs_extra_trb = num_trbs > 1;
+
+ /* Prepare a normal TRB */
+ if (req->direction || req->request.length)
+ dwc3_prepare_one_trb(dep, req, entry_length,
+ req->needs_extra_trb, node, false, false);
+
+ /* Prepare extra TRBs for ZLP and MPS OUT transfer alignment */
+ if ((!req->direction && !req->request.length) || req->needs_extra_trb)
+ dwc3_prepare_one_trb(dep, req,
+ req->direction ? 0 : maxp - rem,
+ false, 1, true, false);
+
+ return num_trbs;
+}
+
+static int dwc3_prepare_trbs_sg(struct dwc3_ep *dep,
struct dwc3_request *req)
{
struct scatterlist *sg = req->start_sg;
@@ -1097,6 +1157,8 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
unsigned int length = req->request.length;
unsigned int remaining = req->request.num_mapped_sgs
- req->num_queued_sgs;
+ unsigned int num_trbs = req->num_trbs;
+ bool needs_extra_trb = dwc3_needs_extra_trb(dep, req);
/*
* If we resume preparing the request, then get the remaining length of
@@ -1106,10 +1168,10 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
length -= sg_dma_len(s);
for_each_sg(sg, s, remaining, i) {
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
- unsigned int rem = length % maxp;
+ unsigned int num_trbs_left = dwc3_calc_trbs_left(dep);
unsigned int trb_length;
- unsigned chain = true;
+ bool must_interrupt = false;
+ bool last_sg = false;
trb_length = min_t(unsigned int, length, sg_dma_len(s));
@@ -1123,59 +1185,28 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
* mapped sg.
*/
if ((i == remaining - 1) || !length)
- chain = false;
-
- if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, trb_length, true, i);
-
- /* Now prepare one extra TRB to align transfer size */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
- maxp - rem, false, 1,
- req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- } else if (req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- !rem && !chain) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* Prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, trb_length, true, i);
-
- /* Prepare one extra TRB to handle ZLP */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
- !req->direction, 1,
- req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
-
- /* Prepare one more TRB to handle MPS alignment */
- if (!req->direction) {
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- }
+ last_sg = true;
+
+ if (!num_trbs_left)
+ break;
+
+ if (last_sg) {
+ if (!dwc3_prepare_last_sg(dep, req, trb_length, i))
+ break;
} else {
- dwc3_prepare_one_trb(dep, req, trb_length, chain, i);
+ /*
+ * Look ahead to check if we have enough TRBs for the
+ * next SG entry. If not, set interrupt on this TRB to
+ * resume preparing the next SG entry when more TRBs are
+ * free.
+ */
+ if (num_trbs_left == 1 || (needs_extra_trb &&
+ num_trbs_left <= 2 &&
+ sg_dma_len(sg_next(s)) >= length))
+ must_interrupt = true;
+
+ dwc3_prepare_one_trb(dep, req, trb_length, 1, i, false,
+ must_interrupt);
}
/*
@@ -1185,7 +1216,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
* we have free trbs we can continue queuing from where we
* previously stopped
*/
- if (chain)
+ if (!last_sg)
req->start_sg = sg_next(s);
req->num_queued_sgs++;
@@ -1200,68 +1231,17 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
break;
}
- if (!dwc3_calc_trbs_left(dep))
+ if (must_interrupt)
break;
}
+
+ return req->num_trbs - num_trbs;
}
-static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
+static int dwc3_prepare_trbs_linear(struct dwc3_ep *dep,
struct dwc3_request *req)
{
- unsigned int length = req->request.length;
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
- unsigned int rem = length % maxp;
-
- if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, length, true, 0);
-
- /* Now prepare one extra TRB to align transfer size */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- } else if (req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (IS_ALIGNED(req->request.length, maxp))) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, length, true, 0);
-
- /* Prepare one extra TRB to handle ZLP */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
- !req->direction, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
-
- /* Prepare one more TRB to handle MPS alignment for OUT */
- if (!req->direction) {
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- }
- } else {
- dwc3_prepare_one_trb(dep, req, length, false, 0);
- }
+ return dwc3_prepare_last_sg(dep, req, req->request.length, 0);
}
/*
@@ -1271,10 +1251,13 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
* The function goes through the requests list and sets up TRBs for the
* transfers. The function returns once there are no more TRBs available or
* it runs out of requests.
+ *
+ * Returns the number of TRBs prepared or negative errno.
*/
-static void dwc3_prepare_trbs(struct dwc3_ep *dep)
+static int dwc3_prepare_trbs(struct dwc3_ep *dep)
{
struct dwc3_request *req, *n;
+ int ret = 0;
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
@@ -1289,11 +1272,14 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* break things.
*/
list_for_each_entry(req, &dep->started_list, list) {
- if (req->num_pending_sgs > 0)
- dwc3_prepare_one_trb_sg(dep, req);
+ if (req->num_pending_sgs > 0) {
+ ret = dwc3_prepare_trbs_sg(dep, req);
+ if (!ret || req->num_pending_sgs)
+ return ret;
+ }
if (!dwc3_calc_trbs_left(dep))
- return;
+ return ret;
/*
* Don't prepare beyond a transfer. In DWC_usb32, its transfer
@@ -1301,30 +1287,32 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* active transfer instead of stopping.
*/
if (dep->stream_capable && req->request.is_last)
- return;
+ return ret;
}
list_for_each_entry_safe(req, n, &dep->pending_list, list) {
struct dwc3 *dwc = dep->dwc;
- int ret;
ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request,
dep->direction);
if (ret)
- return;
+ return ret;
req->sg = req->request.sg;
req->start_sg = req->sg;
req->num_queued_sgs = 0;
req->num_pending_sgs = req->request.num_mapped_sgs;
- if (req->num_pending_sgs > 0)
- dwc3_prepare_one_trb_sg(dep, req);
- else
- dwc3_prepare_one_trb_linear(dep, req);
+ if (req->num_pending_sgs > 0) {
+ ret = dwc3_prepare_trbs_sg(dep, req);
+ if (req->num_pending_sgs)
+ return ret;
+ } else {
+ ret = dwc3_prepare_trbs_linear(dep, req);
+ }
- if (!dwc3_calc_trbs_left(dep))
- return;
+ if (!ret || !dwc3_calc_trbs_left(dep))
+ return ret;
/*
* Don't prepare beyond a transfer. In DWC_usb32, its transfer
@@ -1332,8 +1320,10 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* active transfer instead of stopping.
*/
if (dep->stream_capable && req->request.is_last)
- return;
+ return ret;
}
+
+ return ret;
}
static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep);
@@ -1346,12 +1336,24 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
int ret;
u32 cmd;
- if (!dwc3_calc_trbs_left(dep))
- return 0;
+ /*
+ * Note that it's normal to have no new TRBs prepared (i.e. ret == 0).
+ * This happens when we need to stop and restart a transfer such as in
+ * the case of reinitiating a stream or retrying an isoc transfer.
+ */
+ ret = dwc3_prepare_trbs(dep);
+ if (ret < 0)
+ return ret;
starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED);
- dwc3_prepare_trbs(dep);
+ /*
+ * If there's no new TRB prepared and we don't need to restart a
+ * transfer, there's no need to update the transfer.
+ */
+ if (!ret && !starting)
+ return ret;
+
req = next_request(&dep->started_list);
if (!req) {
dep->flags |= DWC3_EP_PENDING_REQUEST;
@@ -1539,12 +1541,12 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
if (!dwc->dis_start_transfer_quirk &&
(DWC3_VER_IS_PRIOR(DWC31, 170A) ||
DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) {
- if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction)
+ if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction)
return dwc3_gadget_start_isoc_quirk(dep);
}
if (desc->bInterval <= 14 &&
- dwc->gadget.speed >= USB_SPEED_HIGH) {
+ dwc->gadget->speed >= USB_SPEED_HIGH) {
u32 frame = __dwc3_gadget_get_frame(dwc);
bool rollover = frame <
(dep->frame_number & DWC3_FRNUMBER_MASK);
@@ -1600,7 +1602,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
{
struct dwc3 *dwc = dep->dwc;
- if (!dep->endpoint.desc) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
return -ESHUTDOWN;
@@ -1628,8 +1630,13 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE)
return 0;
- /* Start the transfer only after the END_TRANSFER is completed */
- if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
+ /*
+ * Start the transfer only after the END_TRANSFER is completed
+ * and endpoint STALL is cleared.
+ */
+ if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) ||
+ (dep->flags & DWC3_EP_WEDGE) ||
+ (dep->flags & DWC3_EP_STALL)) {
dep->flags |= DWC3_EP_DELAY_START;
return 0;
}
@@ -1648,9 +1655,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
return 0;
if ((dep->flags & DWC3_EP_PENDING_REQUEST)) {
- if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) {
+ if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
return __dwc3_gadget_start_isoc(dep);
- }
}
}
@@ -1788,8 +1794,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
if (value) {
struct dwc3_trb *trb;
- unsigned transfer_in_flight;
- unsigned started;
+ unsigned int transfer_in_flight;
+ unsigned int started;
if (dep->number > 1)
trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
@@ -1822,6 +1828,18 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
return 0;
}
+ dwc3_stop_active_transfer(dep, true, true);
+
+ list_for_each_entry_safe(req, tmp, &dep->started_list, list)
+ dwc3_gadget_move_cancelled_request(req);
+
+ if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
+ dep->flags |= DWC3_EP_PENDING_CLEAR_STALL;
+ return 0;
+ }
+
+ dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
ret = dwc3_send_clear_stall_ep_cmd(dep);
if (ret) {
dev_err(dwc->dev, "failed to clear STALL on %s\n",
@@ -1831,18 +1849,11 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
- dwc3_stop_active_transfer(dep, true, true);
-
- list_for_each_entry_safe(req, tmp, &dep->started_list, list)
- dwc3_gadget_move_cancelled_request(req);
-
- list_for_each_entry_safe(req, tmp, &dep->pending_list, list)
- dwc3_gadget_move_cancelled_request(req);
+ if ((dep->flags & DWC3_EP_DELAY_START) &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ __dwc3_gadget_kick_transfer(dep);
- if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) {
- dep->flags &= ~DWC3_EP_DELAY_START;
- dwc3_gadget_ep_cleanup_cancelled_requests(dep);
- }
+ dep->flags &= ~DWC3_EP_DELAY_START;
}
return ret;
@@ -2010,6 +2021,21 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
return 0;
}
+static void dwc3_stop_active_transfers(struct dwc3 *dwc)
+{
+ u32 epnum;
+
+ for (epnum = 2; epnum < dwc->num_eps; epnum++) {
+ struct dwc3_ep *dep;
+
+ dep = dwc->eps[epnum];
+ if (!dep)
+ continue;
+
+ dwc3_remove_requests(dwc, dep);
+ }
+}
+
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
{
u32 reg;
@@ -2055,6 +2081,9 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
return 0;
}
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
+static void __dwc3_gadget_stop(struct dwc3 *dwc);
+
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
struct dwc3 *dwc = gadget_to_dwc(g);
@@ -2078,7 +2107,46 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
}
}
+ /*
+ * Synchronize any pending event handling before executing the controller
+ * halt routine.
+ */
+ if (!is_on) {
+ dwc3_gadget_disable_irq(dwc);
+ synchronize_irq(dwc->irq_gadget);
+ }
+
spin_lock_irqsave(&dwc->lock, flags);
+
+ if (!is_on) {
+ u32 count;
+
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 4.1.8 Table 4-7, it states that for a device-initiated
+ * disconnect, the SW needs to ensure that it sends "a DEPENDXFER
+ * command for any active transfers" before clearing the RunStop
+ * bit.
+ */
+ dwc3_stop_active_transfers(dwc);
+ __dwc3_gadget_stop(dwc);
+
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the
+ * "software needs to acknowledge the events that are generated
+ * (by writing to GEVNTCOUNTn) while it is waiting for this bit
+ * to be set to '1'."
+ */
+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ count &= DWC3_GEVNTCOUNT_MASK;
+ if (count > 0) {
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count);
+ dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
+ dwc->ev_buf->length;
+ }
+ }
+
ret = dwc3_gadget_run_stop(dwc, is_on, false);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -2244,7 +2312,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
spin_lock_irqsave(&dwc->lock, flags);
if (dwc->gadget_driver) {
dev_err(dwc->dev, "%s is already bound to %s\n",
- dwc->gadget.name,
+ dwc->gadget->name,
dwc->gadget_driver->driver.name);
ret = -EBUSY;
goto err1;
@@ -2416,7 +2484,7 @@ static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep)
dep->endpoint.maxburst = 1;
dep->endpoint.ops = &dwc3_gadget_ep0_ops;
if (!dep->direction)
- dwc->gadget.ep0 = &dep->endpoint;
+ dwc->gadget->ep0 = &dep->endpoint;
dep->endpoint.caps.type_control = true;
@@ -2459,10 +2527,10 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
- dep->endpoint.max_streams = 15;
+ dep->endpoint.max_streams = 16;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
- &dwc->gadget.ep_list);
+ &dwc->gadget->ep_list);
dep->endpoint.caps.type_iso = true;
dep->endpoint.caps.type_bulk = true;
dep->endpoint.caps.type_int = true;
@@ -2508,10 +2576,10 @@ static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
size /= 3;
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
- dep->endpoint.max_streams = 15;
+ dep->endpoint.max_streams = 16;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
- &dwc->gadget.ep_list);
+ &dwc->gadget->ep_list);
dep->endpoint.caps.type_iso = true;
dep->endpoint.caps.type_bulk = true;
dep->endpoint.caps.type_int = true;
@@ -2572,7 +2640,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total)
{
u8 epnum;
- INIT_LIST_HEAD(&dwc->gadget.ep_list);
+ INIT_LIST_HEAD(&dwc->gadget->ep_list);
for (epnum = 0; epnum < total; epnum++) {
int ret;
@@ -2652,12 +2720,12 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
}
/*
- * If we're dealing with unaligned size OUT transfer, we will be left
- * with one TRB pending in the ring. We need to manually clear HWO bit
- * from that TRB.
+ * We use bounce buffer for requests that needs extra TRB or OUT ZLP. If
+ * this TRB points to the bounce buffer address, it's a MPS alignment
+ * TRB. Don't add it to req->remaining calculation.
*/
-
- if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) {
+ if (trb->bpl == lower_32_bits(dep->dwc->bounce_addr) &&
+ trb->bph == upper_32_bits(dep->dwc->bounce_addr)) {
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
return 1;
}
@@ -2732,26 +2800,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
status);
- if (req->needs_extra_trb) {
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ req->request.actual = req->request.length - req->remaining;
+
+ if (!dwc3_gadget_ep_request_completed(req))
+ goto out;
+ if (req->needs_extra_trb) {
ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
status);
-
- /* Reclaim MPS padding TRB for ZLP */
- if (!req->direction && req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (IS_ALIGNED(req->request.length, maxp)))
- ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status);
-
req->needs_extra_trb = false;
}
- req->request.actual = req->request.length - req->remaining;
-
- if (!dwc3_gadget_ep_request_completed(req))
- goto out;
-
dwc3_gadget_giveback(dep, req, status);
out:
@@ -2896,6 +2955,43 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep,
(void) __dwc3_gadget_start_isoc(dep);
}
+static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep,
+ const struct dwc3_event_depevt *event)
+{
+ u8 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
+
+ if (cmd != DWC3_DEPCMD_ENDTRANSFER)
+ return;
+
+ dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+ dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+ dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
+ if (dep->flags & DWC3_EP_PENDING_CLEAR_STALL) {
+ struct dwc3 *dwc = dep->dwc;
+
+ dep->flags &= ~DWC3_EP_PENDING_CLEAR_STALL;
+ if (dwc3_send_clear_stall_ep_cmd(dep)) {
+ struct usb_ep *ep0 = &dwc->eps[0]->endpoint;
+
+ dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name);
+ if (dwc->delayed_status)
+ __dwc3_gadget_ep0_set_halt(ep0, 1);
+ return;
+ }
+
+ dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+ if (dwc->delayed_status)
+ dwc3_ep0_send_delayed_status(dwc);
+ }
+
+ if ((dep->flags & DWC3_EP_DELAY_START) &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ __dwc3_gadget_kick_transfer(dep);
+
+ dep->flags &= ~DWC3_EP_DELAY_START;
+}
+
static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep,
const struct dwc3_event_depevt *event)
{
@@ -2965,7 +3061,6 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
{
struct dwc3_ep *dep;
u8 epnum = event->endpoint_number;
- u8 cmd;
dep = dwc->eps[epnum];
@@ -2991,18 +3086,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dwc3_gadget_endpoint_transfer_not_ready(dep, event);
break;
case DWC3_DEPEVT_EPCMDCMPLT:
- cmd = DEPEVT_PARAMETER_CMD(event->parameters);
-
- if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
- dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
- dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
- dwc3_gadget_ep_cleanup_cancelled_requests(dep);
- if ((dep->flags & DWC3_EP_DELAY_START) &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc))
- __dwc3_gadget_kick_transfer(dep);
-
- dep->flags &= ~DWC3_EP_DELAY_START;
- }
+ dwc3_gadget_endpoint_command_complete(dep, event);
break;
case DWC3_DEPEVT_XFERCOMPLETE:
dwc3_gadget_endpoint_transfer_complete(dep, event);
@@ -3019,7 +3103,7 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->disconnect(&dwc->gadget);
+ dwc->gadget_driver->disconnect(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3028,7 +3112,7 @@ static void dwc3_suspend_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->suspend(&dwc->gadget);
+ dwc->gadget_driver->suspend(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3037,7 +3121,7 @@ static void dwc3_resume_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->resume(&dwc->gadget);
+ dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3047,9 +3131,9 @@ static void dwc3_reset_gadget(struct dwc3 *dwc)
if (!dwc->gadget_driver)
return;
- if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
+ if (dwc->gadget->speed != USB_SPEED_UNKNOWN) {
spin_unlock(&dwc->lock);
- usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
+ usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver);
spin_lock(&dwc->lock);
}
}
@@ -3150,9 +3234,9 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_disconnect_gadget(dwc);
- dwc->gadget.speed = USB_SPEED_UNKNOWN;
+ dwc->gadget->speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
- usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
dwc->connected = false;
}
@@ -3195,6 +3279,13 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
}
dwc3_reset_gadget(dwc);
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW
+ * needs to ensure that it sends "a DEPENDXFER command for any active
+ * transfers."
+ */
+ dwc3_stop_active_transfers(dwc);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
@@ -3231,8 +3322,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
switch (speed) {
case DWC3_DSTS_SUPERSPEED_PLUS:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
- dwc->gadget.ep0->maxpacket = 512;
- dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ dwc->gadget->ep0->maxpacket = 512;
+ dwc->gadget->speed = USB_SPEED_SUPER_PLUS;
break;
case DWC3_DSTS_SUPERSPEED:
/*
@@ -3252,27 +3343,27 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_gadget_reset_interrupt(dwc);
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
- dwc->gadget.ep0->maxpacket = 512;
- dwc->gadget.speed = USB_SPEED_SUPER;
+ dwc->gadget->ep0->maxpacket = 512;
+ dwc->gadget->speed = USB_SPEED_SUPER;
break;
case DWC3_DSTS_HIGHSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
- dwc->gadget.ep0->maxpacket = 64;
- dwc->gadget.speed = USB_SPEED_HIGH;
+ dwc->gadget->ep0->maxpacket = 64;
+ dwc->gadget->speed = USB_SPEED_HIGH;
break;
case DWC3_DSTS_FULLSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
- dwc->gadget.ep0->maxpacket = 64;
- dwc->gadget.speed = USB_SPEED_FULL;
+ dwc->gadget->ep0->maxpacket = 64;
+ dwc->gadget->speed = USB_SPEED_FULL;
break;
case DWC3_DSTS_LOWSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
- dwc->gadget.ep0->maxpacket = 8;
- dwc->gadget.speed = USB_SPEED_LOW;
+ dwc->gadget->ep0->maxpacket = 8;
+ dwc->gadget->speed = USB_SPEED_LOW;
break;
}
- dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+ dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket;
/* Enable USB2 LPM Capability */
@@ -3340,7 +3431,7 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
if (dwc->gadget_driver && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->resume(&dwc->gadget);
+ dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3511,7 +3602,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
* Ignore suspend event until the gadget enters into
* USB_STATE_CONFIGURED state.
*/
- if (dwc->gadget.state >= USB_STATE_CONFIGURED)
+ if (dwc->gadget->state >= USB_STATE_CONFIGURED)
dwc3_gadget_suspend_interrupt(dwc,
event->event_info);
}
@@ -3686,6 +3777,13 @@ out:
return irq;
}
+static void dwc_gadget_release(struct device *dev)
+{
+ struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev);
+
+ kfree(gadget);
+}
+
/**
* dwc3_gadget_init - initializes gadget related registers
* @dwc: pointer to our controller context structure
@@ -3696,6 +3794,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
{
int ret;
int irq;
+ struct device *dev;
irq = dwc3_gadget_get_irq(dwc);
if (irq < 0) {
@@ -3728,12 +3827,21 @@ int dwc3_gadget_init(struct dwc3 *dwc)
}
init_completion(&dwc->ep0_in_setup);
+ dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL);
+ if (!dwc->gadget) {
+ ret = -ENOMEM;
+ goto err3;
+ }
- dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.speed = USB_SPEED_UNKNOWN;
- dwc->gadget.sg_supported = true;
- dwc->gadget.name = "dwc3-gadget";
- dwc->gadget.lpm_capable = true;
+
+ usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release);
+ dev = &dwc->gadget->dev;
+ dev->platform_data = dwc;
+ dwc->gadget->ops = &dwc3_gadget_ops;
+ dwc->gadget->speed = USB_SPEED_UNKNOWN;
+ dwc->gadget->sg_supported = true;
+ dwc->gadget->name = "dwc3-gadget";
+ dwc->gadget->lpm_capable = true;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
@@ -3756,7 +3864,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dev_info(dwc->dev, "changing max_speed on rev %08x\n",
dwc->revision);
- dwc->gadget.max_speed = dwc->maximum_speed;
+ dwc->gadget->max_speed = dwc->maximum_speed;
/*
* REVISIT: Here we should clear all pending IRQs to be
@@ -3765,21 +3873,22 @@ int dwc3_gadget_init(struct dwc3 *dwc)
ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
if (ret)
- goto err3;
+ goto err4;
- ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
+ ret = usb_add_gadget(dwc->gadget);
if (ret) {
- dev_err(dwc->dev, "failed to register udc\n");
- goto err4;
+ dev_err(dwc->dev, "failed to add gadget\n");
+ goto err5;
}
- dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+ dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
return 0;
-err4:
+err5:
dwc3_gadget_free_endpoints(dwc);
-
+err4:
+ usb_put_gadget(dwc->gadget);
err3:
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
@@ -3799,7 +3908,7 @@ err0:
void dwc3_gadget_exit(struct dwc3 *dwc)
{
- usb_del_gadget_udc(&dwc->gadget);
+ usb_del_gadget_udc(dwc->gadget);
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index bd85eb7fa9ef..0cd281949970 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -17,7 +17,7 @@
struct dwc3;
#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint))
-#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget))
+#define gadget_to_dwc(g) (dev_get_platdata(&g->dev))
/* DEPCFG parameter 1 */
#define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0)
@@ -113,6 +113,7 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
--
2.43.0
More information about the U-Boot
mailing list