[RFC PATCH v2 54/64] usb: dwc3: import from kernel v6.10
Jens Wiklander
jens.wiklander at linaro.org
Thu May 7 11:28:01 CEST 2026
Sync Linux kernel dwc3 changes from v6.9 to v6.10.
The following files are preserved accross the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c
Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c
Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.
List of commits: git log --oneline v6.9..v6.10
Commits imported:
2bf35ea46d0b usb: dwc3: pci: add support for the Intel Panther Lake
fc1d1a712b51 usb: dwc3: core: Workaround for CSR read timeout
7838de15bb70 usb: dwc3: core: remove lock of otg mode during gadget suspend/resume to avoid deadlock
2c92ca849fcc tracing/treewide: Remove second parameter of __assign_str()
01be965ce5ab usb: dwc3: core: Fix unused variable warning in core driver
1d26ba0944d3 usb: dwc3: Wait unconditionally after issuing EndXfer command
adeab5bfb818 Merge 6.9-rc7 into usb-next
9b780c845fb6 usb: dwc3: exynos: add support for Google Tensor gs101
3f12222a4beb usb: dwc3: core: Fix compile warning on s390 gcc in dwc3_get_phy call
a160e1202ca3 usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
5df44c6f4f39 usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
2bfc9916a0e4 usb: dwc3: qcom: Refactor IRQ handling in glue driver
6410c8033ba7 usb: dwc3: qcom: Add helper function to request wakeup interrupts
30a46746ca5a usb: dwc3: core: Refactor PHY logic to support Multiport Controller
89d7f9629946 usb: dwc3: core: Skip setting event buffers for host only controllers
921e109c6200 usb: dwc3: core: Access XHCI address space temporarily to read port info
0d31ea587709 Merge 6.9-rc5 into usb-next
684e9f5f97eb usb: dwc3: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
606c096adc79 usb: dwc3: Select 2.0 or 3.0 clk base on maximum_speed
0fb782b5d5c4 usb: dwc3: pci: Don't set "linux,phy_charger_detect" property on Lenovo Yoga Tab2 1380
5bab5dc780c9 Merge 6.9-rc2 into usb-next
Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
---
drivers/usb/dwc3/core.c | 346 +++++++++++++++++++++++++++++---------
drivers/usb/dwc3/core.h | 20 ++-
drivers/usb/dwc3/gadget.c | 4 +-
3 files changed, 284 insertions(+), 86 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 100041320e8d..cb82557678dd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -39,6 +39,7 @@
#include "io.h"
#include "debug.h"
+#include "../host/xhci-ext-caps.h"
#define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
@@ -144,6 +145,7 @@ static void __dwc3_set_mode(struct work_struct *work)
int ret;
u32 reg;
u32 desired_dr_role;
+ int i;
mutex_lock(&dwc->mutex);
spin_lock_irqsave(&dwc->lock, flags);
@@ -221,8 +223,12 @@ static void __dwc3_set_mode(struct work_struct *work)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
@@ -237,8 +243,8 @@ static void __dwc3_set_mode(struct work_struct *work)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -506,6 +512,13 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
{
struct dwc3_event_buffer *evt;
+ unsigned int hw_mode;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+ dwc->ev_buf = NULL;
+ return 0;
+ }
evt = dwc3_alloc_one_event_buffer(dwc, length);
if (IS_ERR(evt)) {
@@ -527,6 +540,9 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ if (!dwc->ev_buf)
+ return 0;
+
evt = dwc->ev_buf;
evt->lpos = 0;
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
@@ -544,6 +560,9 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ if (!dwc->ev_buf)
+ return;
+
evt = dwc->ev_buf;
evt->lpos = 0;
@@ -596,19 +615,11 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
return ret;
}
-/**
- * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success. The USB PHY interfaces are configured but not
- * initialized. The PHY interfaces and the PHYs get initialized together with
- * the core in dwc3_core_init.
- */
-static int dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
{
u32 reg;
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
/*
* Make sure UX_EXIT_PX is cleared as that causes issues with some
@@ -655,9 +666,16 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_del_phy_power_chg_quirk)
reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ return 0;
+}
+
+static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
+{
+ u32 reg;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
/* Select the HS PHY interface */
switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
@@ -669,7 +687,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
} else if (dwc->hsphy_interface &&
!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
} else {
/* Relying on default value. */
if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
@@ -727,7 +745,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->ulpi_ext_vbus_drv)
reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
+
+ return 0;
+}
+
+/**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
+ */
+static int dwc3_phy_setup(struct dwc3 *dwc)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ ret = dwc3_ss_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = dwc3_hs_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
return 0;
}
@@ -735,23 +781,34 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
static int dwc3_phy_init(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_shutdown_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_init(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_exit_usb2_phy;
+ }
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_exit_usb2_phy;
+ for (j = 0; j < dwc->num_usb3_ports; j++) {
+ ret = phy_init(dwc->usb3_generic_phy[j]);
+ if (ret < 0)
+ goto err_exit_usb3_phy;
+ }
return 0;
+err_exit_usb3_phy:
+ while (--j >= 0)
+ phy_exit(dwc->usb3_generic_phy[j]);
+
err_exit_usb2_phy:
- phy_exit(dwc->usb2_generic_phy);
-err_shutdown_usb3_phy:
+ while (--i >= 0)
+ phy_exit(dwc->usb2_generic_phy[i]);
+
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -760,8 +817,13 @@ err_shutdown_usb3_phy:
static void dwc3_phy_exit(struct dwc3 *dwc)
{
- phy_exit(dwc->usb3_generic_phy);
- phy_exit(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_exit(dwc->usb3_generic_phy[i]);
+
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_exit(dwc->usb2_generic_phy[i]);
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -770,23 +832,34 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
static int dwc3_phy_power_on(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
- ret = phy_power_on(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_suspend_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_power_on(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_power_off_usb2_phy;
+ }
- ret = phy_power_on(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_power_off_usb2_phy;
+ for (j = 0; j < dwc->num_usb3_ports; j++) {
+ ret = phy_power_on(dwc->usb3_generic_phy[j]);
+ if (ret < 0)
+ goto err_power_off_usb3_phy;
+ }
return 0;
+err_power_off_usb3_phy:
+ while (--j >= 0)
+ phy_power_off(dwc->usb3_generic_phy[j]);
+
err_power_off_usb2_phy:
- phy_power_off(dwc->usb2_generic_phy);
-err_suspend_usb3_phy:
+ while (--i >= 0)
+ phy_power_off(dwc->usb2_generic_phy[i]);
+
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -795,8 +868,13 @@ err_suspend_usb3_phy:
static void dwc3_phy_power_off(struct dwc3 *dwc)
{
- phy_power_off(dwc->usb3_generic_phy);
- phy_power_off(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_power_off(dwc->usb3_generic_phy[i]);
+
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_power_off(dwc->usb2_generic_phy[i]);
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -879,12 +957,16 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
static void dwc3_core_setup_global_control(struct dwc3 *dwc)
{
+ unsigned int power_opt;
+ unsigned int hw_mode;
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+ switch (power_opt) {
case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
/**
* WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
@@ -917,6 +999,20 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
break;
}
+ /*
+ * This is a workaround for STAR#4846132, which only affects
+ * DWC_usb31 version2.00a operating in host mode.
+ *
+ * There is a problem in DWC_usb31 version 2.00a operating
+ * in host mode that would cause a CSR read timeout When CSR
+ * read coincides with RAM Clock Gating Entry. By disable
+ * Clock Gating, sacrificing power consumption for normal
+ * operation.
+ */
+ if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO &&
+ hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A))
+ reg |= DWC3_GCTL_DSBLCLKGTNG;
+
/* check if current dwc3 is on simulation board */
if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
dev_info(dwc->dev, "Running with FPGA optimizations\n");
@@ -1306,10 +1402,13 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (dwc->parkmode_disable_hs_quirk)
reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS;
- if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
- (dwc->maximum_speed == USB_SPEED_HIGH ||
- dwc->maximum_speed == USB_SPEED_FULL))
- reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+ if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY)) {
+ if (dwc->maximum_speed == USB_SPEED_FULL ||
+ dwc->maximum_speed == USB_SPEED_HIGH)
+ reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+ else
+ reg &= ~DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+ }
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}
@@ -1344,7 +1443,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *node = dev->of_node;
+ char phy_name[9];
int ret;
+ u8 i;
if (node) {
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
@@ -1370,22 +1471,38 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
- dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(dwc->usb2_generic_phy)) {
- ret = PTR_ERR(dwc->usb2_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb2_generic_phy = NULL;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->num_usb2_ports == 1)
+ snprintf(phy_name, sizeof(phy_name), "usb2-phy");
else
- return dev_err_probe(dev, ret, "no usb2 phy configured\n");
+ snprintf(phy_name, sizeof(phy_name), "usb2-%u", i);
+
+ dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb2_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb2_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
}
- dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
- if (IS_ERR(dwc->usb3_generic_phy)) {
- ret = PTR_ERR(dwc->usb3_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb3_generic_phy = NULL;
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ if (dwc->num_usb3_ports == 1)
+ snprintf(phy_name, sizeof(phy_name), "usb3-phy");
else
- return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+ snprintf(phy_name, sizeof(phy_name), "usb3-%u", i);
+
+ dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb3_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb3_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
}
return 0;
@@ -1395,6 +1512,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
int ret;
+ int i;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
@@ -1402,8 +1520,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -1414,8 +1532,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
ret = dwc3_host_init(dwc);
if (ret)
@@ -1867,10 +1987,60 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
return 0;
}
+static int dwc3_get_num_ports(struct dwc3 *dwc)
+{
+ void __iomem *base;
+ u8 major_revision;
+ u32 offset;
+ u32 val;
+
+ /*
+ * Remap xHCI address space to access XHCI ext cap regs since it is
+ * needed to get information on number of ports present.
+ */
+ base = ioremap(dwc->xhci_resources[0].start,
+ resource_size(&dwc->xhci_resources[0]));
+ if (!base)
+ return -ENOMEM;
+
+ offset = 0;
+ do {
+ offset = xhci_find_next_ext_cap(base, offset,
+ XHCI_EXT_CAPS_PROTOCOL);
+ if (!offset)
+ break;
+
+ val = readl(base + offset);
+ major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+ val = readl(base + offset + 0x08);
+ if (major_revision == 0x03) {
+ dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+ } else if (major_revision <= 0x02) {
+ dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+ } else {
+ dev_warn(dwc->dev, "unrecognized port major revision %d\n",
+ major_revision);
+ }
+ } while (1);
+
+ dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+ dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+ iounmap(base);
+
+ if (dwc->num_usb2_ports > DWC3_USB2_MAX_PORTS ||
+ dwc->num_usb3_ports > DWC3_USB3_MAX_PORTS)
+ return -EINVAL;
+
+ return 0;
+}
+
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res, dwc_res;
+ unsigned int hw_mode;
void __iomem *regs;
struct dwc3 *dwc;
int ret;
@@ -1954,6 +2124,20 @@ static int dwc3_probe(struct platform_device *pdev)
goto err_disable_clks;
}
+ /*
+ * Currently only DWC3 controllers that are host-only capable
+ * can have more than one port.
+ */
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_get_num_ports(dwc);
+ if (ret)
+ goto err_disable_clks;
+ } else {
+ dwc->num_usb2_ports = 1;
+ dwc->num_usb3_ports = 1;
+ }
+
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
@@ -2084,8 +2268,8 @@ assert_reset:
static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
- unsigned long flags;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2104,17 +2288,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
dwc->dis_enblslpm_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
- DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
+ DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
/* Give some time for USB2 PHY to suspend */
usleep_range(5000, 6000);
}
- phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -2122,9 +2310,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
break;
if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
- spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_suspend(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
synchronize_irq(dwc->irq_gadget);
}
@@ -2141,9 +2327,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
{
- unsigned long flags;
int ret;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2163,17 +2349,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (dwc->dis_u2_susphy_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ if (dwc->dis_u2_susphy_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- if (dwc->dis_enblslpm_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
- phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++)
+ phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
+ for (i = 0; i < dwc->num_usb3_ports; i++)
+ phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
break;
case DWC3_GCTL_PRTCAP_OTG:
/* nothing to do on runtime_resume */
@@ -2190,9 +2380,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST) {
dwc3_otg_host_init(dwc);
} else if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
- spin_lock_irqsave(&dwc->lock, flags);
dwc3_gadget_resume(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
}
break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 180dd8d29287..3781c736c1a1 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -33,6 +33,13 @@
#include <linux/power_supply.h>
+/*
+ * DWC3 Multiport controllers support up to 15 High-Speed PHYs
+ * and 4 SuperSpeed PHYs.
+ */
+#define DWC3_USB2_MAX_PORTS 15
+#define DWC3_USB3_MAX_PORTS 4
+
#define DWC3_MSG_MAX 500
/* Global constants */
@@ -1037,8 +1044,10 @@ struct dwc3_scratchpad_array {
* @usb_psy: pointer to power supply interface.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
- * @usb2_generic_phy: pointer to USB2 PHY
- * @usb3_generic_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to array of USB2 PHYs
+ * @usb3_generic_phy: pointer to array of USB3 PHYs
+ * @num_usb2_ports: number of USB2 ports
+ * @num_usb3_ports: number of USB3 ports
* @phys_ready: flag to indicate that PHYs are ready
* @ulpi: pointer to ulpi interface
* @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1184,8 +1193,11 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
- struct phy *usb2_generic_phy;
- struct phy *usb3_generic_phy;
+ struct phy *usb2_generic_phy[DWC3_USB2_MAX_PORTS];
+ struct phy *usb3_generic_phy[DWC3_USB3_MAX_PORTS];
+
+ u8 num_usb2_ports;
+ u8 num_usb3_ports;
bool phys_ready;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f94f68f1e7d2..89fc690fdf34 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1699,7 +1699,6 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
*/
static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt)
{
- struct dwc3 *dwc = dep->dwc;
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
int ret;
@@ -1724,8 +1723,7 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
dep->resource_index = 0;
if (!interrupt) {
- if (!DWC3_IP_IS(DWC3) || DWC3_VER_IS_PRIOR(DWC3, 310A))
- mdelay(1);
+ mdelay(1);
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
} else if (!ret) {
dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
--
2.43.0
More information about the U-Boot
mailing list