[PATCH 0/6] TQMa7 eeprom sysinfo driver

[Alexander Feilke]

From: Alexander Feilke <alexander.feilke at ew.tq-group.com>

Integrates a new tq_eeprom sysinfo driver that reads & prints board
information during boot.

This is the basis for additional patches that will be sent along with
updates of the TQMa6 in the near future, including support for multiple
indexed sysinfo devices and VARD (variant detection) data for newer TQ SOM's.

Alexander Feilke (1):
  boards: tqma7: integrate sysinfo_tq_eeprom driver

Nora Schiffer (5):
  sysinfo: uclass: use sysinfo_priv size for per_device_auto
  sysinfo: add sysinfo_get_and_detect() helper
  sysinfo: tq_eeprom: new driver
  sysinfo: add IDs for RAM size and variant
  board: tq: common: add sysinfo helpers

 arch/arm/dts/imx7s-tqma7-u-boot.dtsi |   7 +
 board/tq/common/Kconfig              |  27 ++++
 board/tq/common/Makefile             |   4 +
 board/tq/common/tq_sysinfo.c         |  32 ++++
 board/tq/common/tq_sysinfo.h         |  18 +++
 board/tq/tqma7/tqma7.c               |   4 +
 drivers/sysinfo/Kconfig              |   8 +
 drivers/sysinfo/Makefile             |   1 +
 drivers/sysinfo/sysinfo-uclass.c     |   2 +-
 drivers/sysinfo/tq_eeprom.c          | 223 +++++++++++++++++++++++++++
 include/sysinfo.h                    |  24 +++
 include/sysinfo/tq_eeprom.h          |  24 +++
 12 files changed, 373 insertions(+), 1 deletion(-)
 create mode 100644 board/tq/common/tq_sysinfo.c
 create mode 100644 board/tq/common/tq_sysinfo.h
 create mode 100644 drivers/sysinfo/tq_eeprom.c
 create mode 100644 include/sysinfo/tq_eeprom.h

-- 
2.34.1