[PATCH 0/2] board: toradex: imx95: remove gpio1 reg

[Peng Fan]

On Wed, May 06, 2026 at 01:42:19PM +0200, Antoine Gouby wrote:
>This series removes gpio1 reg from Toradex SMARC iMX95 and Verdin iMX95
>device trees.
>
>The RGPIO2P driver contains legacy handling for compatible combinations
>that expose two reg ranges (dual base) for i.MX8ULP and i.MX93.
>
>The i.MX95 GPIO controller exposes a single register range, so the 
>dual-base handling is unnecessary.
>
>On Verdin iMX95, the second address of the gpio1 reg node was incorrect.
>When used, it needs to be offsetted by 0x40 to start at the Port Data
>Output register.
>
>Signed-off-by: Antoine Gouby <antoine.gouby at toradex.com>

Reviewed-by: Peng Fan <peng.fan at nxp.com>