[PATCH] phy: Kconfig: use bool instead of tristate
David Lechner
dlechner at baylibre.com
Wed May 13 16:11:52 CEST 2026
Change all uses of tristate in the PHY Kconfigs to bool. U-Boot does
not support modules, so tristate does not make sense here.
Signed-off-by: David Lechner <dlechner at baylibre.com>
---
drivers/phy/Kconfig | 14 +++++++-------
drivers/phy/cadence/Kconfig | 4 ++--
drivers/phy/qcom/Kconfig | 16 ++++++++--------
drivers/phy/renesas/Kconfig | 6 +++---
drivers/phy/rockchip/Kconfig | 2 +-
drivers/phy/ti/Kconfig | 2 +-
6 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 5c8ec2b146f..eafa82fe494 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -114,7 +114,7 @@ config BCM_SR_PCIE_PHY
If unsure, say N.
config PHY_DA8XX_USB
- tristate "TI DA8xx USB PHY Driver"
+ bool "TI DA8xx USB PHY Driver"
depends on PHY && ARCH_DAVINCI
help
Enable this to support the USB PHY on DA8xx SoCs.
@@ -138,7 +138,7 @@ config SPL_PIPE3_PHY
and omap5
config AM654_PHY
- tristate "TI AM654 SERDES support"
+ bool "TI AM654 SERDES support"
depends on PHY && ARCH_K3
select REGMAP
select SYSCON
@@ -155,7 +155,7 @@ config STI_USB_PHY
STiH407 SoC families.
config PHY_RCAR_GEN2
- tristate "Renesas R-Car Gen2 USB PHY"
+ bool "Renesas R-Car Gen2 USB PHY"
depends on PHY && RCAR_GEN2
help
Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
@@ -163,7 +163,7 @@ config PHY_RCAR_GEN2
allows configuring the module multiplexing.
config PHY_RCAR_GEN3
- tristate "Renesas R-Car Gen3 USB PHY"
+ bool "Renesas R-Car Gen3 USB PHY"
depends on PHY && CLK && DM_REGULATOR && (RCAR_GEN3 || RZG2L)
default y if (RCAR_GEN3 || RZG2L)
help
@@ -171,7 +171,7 @@ config PHY_RCAR_GEN3
PHY connected to EHCI USB module and controls USB OTG operation.
config PHY_STM32_USBPHYC
- tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
+ bool "STMicroelectronics STM32 SoC USB HS PHY driver"
depends on PHY && ARCH_STM32MP
help
Enable this to support the High-Speed USB transceiver that is part of
@@ -283,7 +283,7 @@ config PHY_MTK_TPHY
so you can easily distinguish them by banks layout.
config PHY_MTK_UFS
- tristate "MediaTek UFS M-PHY driver"
+ bool "MediaTek UFS M-PHY driver"
depends on ARCH_MEDIATEK
depends on PHY
help
@@ -337,7 +337,7 @@ config PHY_IMX8M_PCIE
This PHY is found on i.MX8M devices supporting PCIe.
config PHY_XILINX_ZYNQMP
- tristate "Xilinx ZynqMP PHY driver"
+ bool "Xilinx ZynqMP PHY driver"
depends on PHY && ARCH_ZYNQMP
help
Enable this to support ZynqMP High Speed Gigabit Transceiver
diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig
index 8c0ab80fbbc..f5f096889fe 100644
--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
@@ -1,11 +1,11 @@
config PHY_CADENCE_SIERRA
- tristate "Cadence Sierra PHY Driver"
+ bool "Cadence Sierra PHY Driver"
depends on DM_RESET
help
Enable this to support the Cadence Sierra PHY driver
config PHY_CADENCE_TORRENT
- tristate "Cadence Torrent PHY Driver"
+ bool "Cadence Torrent PHY Driver"
depends on DM_RESET
help
Enable this to support the Cadence Torrent PHY driver
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index 49f830abf01..7094903d869 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -7,7 +7,7 @@ config MSM8916_USB_PHY
This PHY is found on qualcomm dragonboard410c development board.
config PHY_QCOM_IPQ4019_USB
- tristate "Qualcomm IPQ4019 USB PHY driver"
+ bool "Qualcomm IPQ4019 USB PHY driver"
depends on PHY && ARCH_IPQ40XX
help
Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
@@ -21,26 +21,26 @@ config PHY_QCOM_QMP_COMBO
PHY (USB3 + DisplayPort). Currently only USB3 mode is supported.
config PHY_QCOM_QMP_PCIE
- tristate "Qualcomm QMP PCIe PHY driver"
+ bool "Qualcomm QMP PCIe PHY driver"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the PCIe QMP PHY on various Qualcomm chipsets.
config PHY_QCOM_QMP_UFS
- tristate "Qualcomm QMP UFS PHY driver"
+ bool "Qualcomm QMP UFS PHY driver"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the UFS QMP PHY on various Qualcomm chipsets.
config PHY_QCOM_QUSB2
- tristate "Qualcomm USB QUSB2 PHY driver"
+ bool "Qualcomm USB QUSB2 PHY driver"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the Super-Speed USB transceiver on various
Qualcomm chipsets.
config PHY_QCOM_USB_SNPS_FEMTO_V2
- tristate "Qualcomm SNPS FEMTO USB HS PHY v2"
+ bool "Qualcomm SNPS FEMTO USB HS PHY v2"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the Qualcomm Synopsys DesignWare Core 7nm
@@ -48,7 +48,7 @@ config PHY_QCOM_USB_SNPS_FEMTO_V2
is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
config PHY_QCOM_SNPS_EUSB2
- tristate "Qualcomm Synopsys eUSB2 High-Speed PHY"
+ bool "Qualcomm Synopsys eUSB2 High-Speed PHY"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the Qualcomm Synopsys DesignWare eUSB2
@@ -56,7 +56,7 @@ config PHY_QCOM_SNPS_EUSB2
is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
config PHY_QCOM_USB_HS_28NM
- tristate "Qualcomm 28nm High-Speed PHY"
+ bool "Qualcomm 28nm High-Speed PHY"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
@@ -65,7 +65,7 @@ config PHY_QCOM_USB_HS_28NM
IPs on MSM SOCs.
config PHY_QCOM_USB_SS
- tristate "Qualcomm USB Super-Speed PHY driver"
+ bool "Qualcomm USB Super-Speed PHY driver"
depends on PHY && ARCH_SNAPDRAGON
help
Enable this to support the Super-Speed USB transceiver on various
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
index affbee0500c..3358d454e59 100644
--- a/drivers/phy/renesas/Kconfig
+++ b/drivers/phy/renesas/Kconfig
@@ -3,19 +3,19 @@
# Phy drivers for Renesas platforms
config PHY_R8A779F0_ETHERNET_SERDES
- tristate "Renesas R-Car S4-8 Ethernet SERDES driver"
+ bool "Renesas R-Car S4-8 Ethernet SERDES driver"
depends on RCAR_64 && PHY
help
Support for Ethernet SERDES found on Renesas R-Car S4-8 SoCs.
config PHY_R8A78000_ETHERNET_PCS
- tristate "Renesas R-Car X5H Ethernet PCS driver"
+ bool "Renesas R-Car X5H Ethernet PCS driver"
depends on RCAR_64 && PHY
help
Support for Ethernet PCS found on Renesas R-Car X5H SoCs.
config PHY_R8A78000_MP_PHY
- tristate "Renesas R-Car X5H Multi-Protocol PHY driver"
+ bool "Renesas R-Car X5H Multi-Protocol PHY driver"
depends on RCAR_64 && PHY
help
Support for Multi-Protocol PHY on Renesas R-Car X5H SoCs.
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 80128335d52..6f3d7ebe29e 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -49,7 +49,7 @@ config PHY_ROCKCHIP_SNPS_PCIE3
also be able splited into multiple combinations of lanes.
config PHY_ROCKCHIP_USBDP
- tristate "Rockchip USBDP COMBO PHY Driver"
+ bool "Rockchip USBDP COMBO PHY Driver"
depends on ARCH_ROCKCHIP
select PHY
help
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index df750b26d66..fe96eb6806f 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -1,5 +1,5 @@
config PHY_J721E_WIZ
- tristate "TI J721E WIZ (SERDES Wrapper) support"
+ bool "TI J721E WIZ (SERDES Wrapper) support"
depends on ARCH_K3
help
This option enables support for WIZ module present in TI's J721E
---
base-commit: e3e651c480c46b332f16a7555b97c6c6fd640a40
change-id: 20260513-phy-kconfig-no-tristate-61bc2d324149
Best regards,
--
David Lechner <dlechner at baylibre.com>
More information about the U-Boot
mailing list