[PATCH 2/2] env: ti: k3_dfu: use Kconfig options for addresses

[Anshul Dalal]

The load addresses for DFU download binaries were hardcoded for K3
devices which required redefinition of such env for boards that deviated
from the expected K3 memory map (such as AM6254atl EMV).

This patch replaces the hardcoded addresses with their corresponding
Kconfig options making the k3_dfu.env more general.

Signed-off-by: Anshul Dalal <anshuld at ti.com>
---
 board/ti/am62x/am6254atl.env | 7 -------
 include/env/ti/k3_dfu.env    | 4 ++--
 2 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/board/ti/am62x/am6254atl.env b/board/ti/am62x/am6254atl.env
index dabc77245d4..a9187c2b1aa 100644
--- a/board/ti/am62x/am6254atl.env
+++ b/board/ti/am62x/am6254atl.env
@@ -27,13 +27,6 @@ splashimage=0x82180000
 splashpos=m,m
 splashsource=sf
 
-dfu_alt_info_ram=
-#if CONFIG_ARM64
-	u-boot.img ram 0x82f80000 0x400000
-#else
-	tispl.bin ram 0x82000000 0x200000
-#endif
-
 #if CONFIG_BOOTMETH_ANDROID
 #include <env/ti/android.env>
 adtb_idx=0
diff --git a/include/env/ti/k3_dfu.env b/include/env/ti/k3_dfu.env
index 0f82a8afb42..1ae9ae6ae15 100644
--- a/include/env/ti/k3_dfu.env
+++ b/include/env/ti/k3_dfu.env
@@ -26,8 +26,8 @@ dfu_alt_info_ospi=
 
 dfu_alt_info_ram=
 #if CONFIG_ARM64
-	u-boot.img ram 0x81000000 0x400000
+	u-boot.img ram CONFIG_SPL_LOAD_FIT_ADDRESS 0x400000
 #else
-	tispl.bin ram 0x80080000 0x200000
+	tispl.bin ram CONFIG_SPL_LOAD_FIT_ADDRESS 0x200000
 #endif
 

-- 
2.53.0