[PATCH v4 06/14] dts: k1: enable clocks in SPL

[Guodong Xu]

From: Raymond Mao <raymond.mao at riscstar.com>

Make the K1 clock controllers visible to SPL by tagging the four root
fixed clocks (osc_32k, vctcxo_{1,3,24}m) and the four syscon nodes
(mpmu, pll, apmu, apbc) with bootph-pre-ram in the BPI-F3 U-Boot
overlay.

Signed-off-by: Raymond Mao <raymond.mao at riscstar.com>
Signed-off-by: Guodong Xu <guodong at riscstar.com>
---
v4:
- Drop v3's separate k1-spl.dts (which #included k1.dtsi from the
  local fork); place SPL bootph-pre-ram markers in
  k1-bananapi-f3-u-boot.dtsi against the upstream-mirrored BPI-F3 DT.
- Extend APBC clocks/clock-names with pll1_d78_31p5 (MPMU) and
  pll1_d4 (PLL controller). The kernel registers these via
  clk_register_fixed_factor at runtime; U-Boot's CCF resolves them
  through DT, so they must be listed for probe ordering.
---
 arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi | 32 +++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi b/arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi
index 4e4d0e0c49e..fbee8763a21 100644
--- a/arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi
+++ b/arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi
@@ -32,3 +32,35 @@
 &uart0 {
 	bootph-pre-ram;
 };
+
+&osc_32k {
+	bootph-pre-ram;
+};
+
+&vctcxo_1m {
+	bootph-pre-ram;
+};
+
+&vctcxo_3m {
+	bootph-pre-ram;
+};
+
+&vctcxo_24m {
+	bootph-pre-ram;
+};
+
+&syscon_mpmu {
+	bootph-pre-ram;
+};
+
+&pll {
+	bootph-pre-ram;
+};
+
+&syscon_apmu {
+	bootph-pre-ram;
+};
+
+&syscon_apbc {
+	bootph-pre-ram;
+};

-- 
2.43.0