[PATCH 5/5] configs: radxa-cubie-a5e: enable the gmac1 controller

[Junhui Liu]

The Allwinner A527 SoC features two Ethernet controllers utilizing
different IP blocks. While gmac0 uses the older sun8i-emac IP, gmac1 is
based on the Synopsys DesignWare Ethernet QOS IP.

This enables the DWC_ETH_QOS_SUNXI driver and the required PHY interface
configurations in the defconfig for the Radxa Cubie A5E board,
activating the gmac1 port.

Signed-off-by: Junhui Liu <junhui.liu at pigmoral.tech>
---
 configs/radxa-cubie-a5e_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/radxa-cubie-a5e_defconfig b/configs/radxa-cubie-a5e_defconfig
index 52a23615e60..fbfddf2773c 100644
--- a/configs/radxa-cubie-a5e_defconfig
+++ b/configs/radxa-cubie-a5e_defconfig
@@ -25,6 +25,12 @@ CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_SUNXI=y
+CONFIG_RGMII=y
+CONFIG_RMII=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_PHY_REALTEK=y
 CONFIG_REGULATOR_AXP=y

-- 
2.54.0