[PATCH 0/4] Enable splashscreen functionality on AM62X

[Swamil Jain]

This patch series introduces splashscreen support for
AM62x platforms by adding configuration fragments and implementing
selective splashscreen enablement across different boot configurations.

The series adds two configuration fragments: am62x_a53_splashscreen.config
and am62x_evm_prune_splashscreen.config. These fragments allow platforms
to selectively enable or disable splashscreen functionality based on
their specific requirements. The prune fragment is particularly useful
for platforms like AM62P where splashscreen must be disabled when using
TI-DM firmware with display sharing features.

The series enables splashscreen on AM62X.

Note:
-----
A patch was posted earlier to enable splashscreen functionality[1].
It breaks ethernet-boot builds because of size constraints, and
splashscreen functionality is not required with ethernet-boot as of now.
This series addresses the issue.

[1]: https://lore.kernel.org/all/20251106085842.629521-1-s-jain1@ti.com/
---
Devarsh Thakkar (2):
  configs: am62x: Add splashscreen config fragment
  configs: am62x: Add splashscreen prune config fragment

Swamil Jain (2):
  configs: am62x_evm_a53_ethboot_defconfig: Disable splashscreen
  configs: am62x_evm_a53_defconfig: Enable A53 splashscreen at u-boot
    SPL

 configs/am62x_a53_splashscreen.config       | 16 ++++++++++++++++
 configs/am62x_evm_a53_defconfig             |  3 ++-
 configs/am62x_evm_a53_ethboot_defconfig     |  1 +
 configs/am62x_evm_prune_splashscreen.config | 16 ++++++++++++++++
 4 files changed, 35 insertions(+), 1 deletion(-)
 create mode 100644 configs/am62x_a53_splashscreen.config
 create mode 100644 configs/am62x_evm_prune_splashscreen.config