[PATCH v6 00/16] sc5xx Environment Cleanup and Fixes
Caleb Ethridge
caleb.ethridge at analog.com
Thu May 21 15:53:11 CEST 2026
This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.
A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.
Signed-off-by: Caleb Ethridge <caleb.ethridge at analog.com>
Changes in v6:
- Fixed ramdisk_addr_r for the sc584-ezkit
- Updated commit messages with more information
- Split "Remove update commands" into two logical commits
Note: The series and future patch series will be sent using analog.com email addresses,
instead of personal emails with our analog.com emails cc'ed on the series.
Caleb Ethridge (15):
configs: sc5xx: Do not store environment in SPI flash
mach-sc5xx: Remove update commands from default environment
mach-sc59x: Add CONFIG_SC5XX_LOADADDR
mach-sc5xx: Update boot commands
mach-sc5xx: Switch from tftp to wget
mach-sc5xx: Add USB boot command
mach-sc5xx: Remove preliminary binman support
dts: sc594: Fix gige-reset line on EZKIT
mach-sc5xx: sc573: Rename EZKIT board to EZLITE
mach-sc5xx: Update image load address
mach-sc5xx: Update SPI bootargs for ubifs
configs: sc5xx: Set default bootcmd to SPI boot
arm: sc5xx: Remove SC5XX_LOADADDR
arm: sc5xx: Add fdt_addr_r, kernel_addr_r, and ramdisk_addr_r
mach-sc5xx: Remove unused image offset Kconfig options
Ozan Durgut (1):
arm: sc5xx: add missing boot env selectors
arch/arm/dts/Makefile | 2 +-
.../dts/{sc573-ezkit.dts => sc573-ezlite.dts} | 4 +-
arch/arm/dts/sc594-som-ezkit.dts | 2 +-
arch/arm/dts/sc5xx.dtsi | 41 -------
arch/arm/mach-sc5xx/Kconfig | 71 +-----------
arch/arm/mach-sc5xx/init/dmcinit.c | 2 +-
board/adi/sc573-ezkit/sc573-ezkit.env | 17 ---
.../adi/{sc573-ezkit => sc573-ezlite}/Kconfig | 8 +-
.../{sc573-ezkit => sc573-ezlite}/Makefile | 2 +-
.../sc573-ezlite.c} | 0
board/adi/sc573-ezlite/sc573-ezlite.env | 16 +++
board/adi/sc584-ezkit/sc584-ezkit.env | 9 +-
board/adi/sc589-ezkit/sc589-ezkit.env | 9 +-
board/adi/sc589-mini/sc589-mini.env | 9 +-
board/adi/sc594-som-ezkit/sc594-som-ezkit.env | 9 +-
.../adi/sc594-som-ezlite/sc594-som-ezlite.env | 9 +-
board/adi/sc598-som-ezkit/sc598-som-ezkit.env | 9 +-
.../adi/sc598-som-ezlite/sc598-som-ezlite.env | 14 ++-
...ezkit_defconfig => sc573-ezlite_defconfig} | 11 +-
configs/sc584-ezkit_defconfig | 10 +-
configs/sc589-ezkit_defconfig | 12 +-
configs/sc589-mini_defconfig | 12 +-
configs/sc594-som-ezkit-spl_defconfig | 7 +-
configs/sc594-som-ezlite-spl_defconfig | 7 +-
configs/sc598-som-ezkit-spl_defconfig | 5 +-
configs/sc598-som-ezlite-spl_defconfig | 5 +-
.../arm/adi/adi,sc5xx.yaml | 2 +-
.../configs/{sc573-ezkit.h => sc573-ezlite.h} | 4 +-
include/env/adi/adi_boot.env | 103 +++++-------------
29 files changed, 108 insertions(+), 303 deletions(-)
rename arch/arm/dts/{sc573-ezkit.dts => sc573-ezlite.dts} (98%)
delete mode 100644 board/adi/sc573-ezkit/sc573-ezkit.env
rename board/adi/{sc573-ezkit => sc573-ezlite}/Kconfig (92%)
rename board/adi/{sc573-ezkit => sc573-ezlite}/Makefile (79%)
rename board/adi/{sc573-ezkit/sc573-ezkit.c => sc573-ezlite/sc573-ezlite.c} (100%)
create mode 100644 board/adi/sc573-ezlite/sc573-ezlite.env
rename configs/{sc573-ezkit_defconfig => sc573-ezlite_defconfig} (87%)
rename include/configs/{sc573-ezkit.h => sc573-ezlite.h} (79%)
--
2.34.1
More information about the U-Boot
mailing list