[PATCH 2/6] usb: musb-new: Use ofnode and dev APIs

Peng Fan (OSS) peng.fan at oss.nxp.com
Tue May 26 11:09:58 CEST 2026


From: Peng Fan <peng.fan at nxp.com>

Convert the TI MUSB driver to use dev and ofnode-based device tree APIs
instead of legacy FDT interfaces.

Replace dev_of_offset(), fdt_get_alias(), fdtdec_get_int(), and related
helpers with their ofnode equivalents such as
dev_ofnode(), ofnode_get_aliases_node(), ofnode_equal(), and
dev_read_s32_default().

The USB index lookup is updated to compare ofnode handles instead of device
tree path strings. Also remove direct dependency on gd->fdt_blob.

No functional changes.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/usb/musb-new/ti-musb.c | 31 ++++++++++++++-----------------
 1 file changed, 14 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/musb-new/ti-musb.c b/drivers/usb/musb-new/ti-musb.c
index e083cb7d0ff..3dd6e3eb718 100644
--- a/drivers/usb/musb-new/ti-musb.c
+++ b/drivers/usb/musb-new/ti-musb.c
@@ -51,29 +51,25 @@ static void ti_musb_set_phy_power(struct udevice *dev, u8 on)
 
 #if CONFIG_IS_ENABLED(OF_CONTROL)
 
-static int ti_musb_get_usb_index(int node)
+static int ti_musb_get_usb_index(ofnode node)
 {
-	const void *fdt = gd->fdt_blob;
 	int i = 0;
-	char path[64];
-	const char *alias_path;
+	ofnode alias_path;
 	char alias[16];
 
-	fdt_get_path(fdt, node, path, sizeof(path));
-
 	do {
 		snprintf(alias, sizeof(alias), "usb%d", i);
-		alias_path = fdt_get_alias(fdt, alias);
-		if (alias_path == NULL) {
+		alias_path = ofnode_get_aliases_node(alias);
+		if (!ofnode_valid(alias_path)) {
 			debug("USB index not found\n");
 			return -ENOENT;
 		}
 
-		if (!strcmp(path, alias_path))
+		if (ofnode_equal(node, alias_path))
 			return i;
 
 		i++;
-	} while (alias_path);
+	} while (ofnode_valid(alias_path));
 
 	return -ENOENT;
 }
@@ -81,15 +77,16 @@ static int ti_musb_get_usb_index(int node)
 static int ti_musb_of_to_plat(struct udevice *dev)
 {
 	struct ti_musb_plat *plat = dev_get_plat(dev);
-	const void *fdt = gd->fdt_blob;
-	int node = dev_of_offset(dev);
+	ofnode node = dev_ofnode(dev);
 	ofnode phys_node;
 	ofnode ctrl_mod_node;
 	int usb_index;
 	int ret;
 	struct musb_hdrc_config *musb_config;
 
-	plat->base = devfdt_get_addr_index_ptr(dev, 1);
+	plat->base = dev_read_addr_index_ptr(dev, 1);
+	if (!plat->base)
+		return -EINVAL;
 
 	phys_node = ofnode_get_by_phandle(dev_read_u32_default(dev, "phys", 0));
 	ctrl_mod_node = ofnode_get_by_phandle(ofnode_read_u32_default(phys_node, "ti,ctrl_mod", 0));
@@ -109,7 +106,7 @@ static int ti_musb_of_to_plat(struct udevice *dev)
 	musb_config = malloc(sizeof(struct musb_hdrc_config));
 	memset(musb_config, 0, sizeof(struct musb_hdrc_config));
 
-	ret = fdtdec_get_int(fdt, node, "mentor,multipoint", -1);
+	ret = dev_read_s32_default(dev, "mentor,multipoint", -1);
 	if (ret < 0) {
 		pr_err("MUSB multipoint DT entry missing\n");
 		return -ENOENT;
@@ -119,7 +116,7 @@ static int ti_musb_of_to_plat(struct udevice *dev)
 
 	musb_config->dyn_fifo = 1;
 
-	ret = fdtdec_get_int(fdt, node, "mentor,num-eps", -1);
+	ret = dev_read_s32_default(dev, "mentor,num-eps", -1);
 	if (ret < 0) {
 		pr_err("MUSB num-eps DT entry missing\n");
 		return -ENOENT;
@@ -127,7 +124,7 @@ static int ti_musb_of_to_plat(struct udevice *dev)
 		musb_config->num_eps = ret;
 	}
 
-	ret = fdtdec_get_int(fdt, node, "mentor,ram-bits", -1);
+	ret = dev_read_s32_default(dev, "mentor,ram-bits", -1);
 	if (ret < 0) {
 		pr_err("MUSB ram-bits DT entry missing\n");
 		return -ENOENT;
@@ -137,7 +134,7 @@ static int ti_musb_of_to_plat(struct udevice *dev)
 
 	plat->plat.config = musb_config;
 
-	ret = fdtdec_get_int(fdt, node, "mentor,power", -1);
+	ret = dev_read_s32_default(dev, "mentor,power", -1);
 	if (ret < 0) {
 		pr_err("MUSB mentor,power DT entry missing\n");
 		return -ENOENT;

-- 
2.51.0



More information about the U-Boot mailing list