[PATCH 1/2] board: st: stm32mp15: support dynamic A/B bank bootup

[Patrice CHOTARD]

On 5/18/26 08:54, Dario Binacchi wrote:
> Following commit 4300f9f4c5d7 ("board: st: stm32mp25: support dynamic
> A/B bank bootup"), this patch enables automatic detection of the active
> A/B bank on STM32MP15 platforms by retrieving partition GUIDs from FWU
> metadata.
> 
> This ensures the system correctly identifies the bootable partitions
> even in multi-bank scenarios, falling back to a standard bootable flag
> scan if the UUIDs are missing.
> 
> To enable A/B bank bootup on STM32MP15 boards, add the following Kconfig
> options to the  stm32mp15[_basic]_defconfig:
> 
>  CONFIG_FWU_MULTI_BANK_UPDATE=y
>  CONFIG_FWU_MDATA=y
>  CONFIG_FWU_NUM_BANKS=2
>  CONFIG_FWU_NUM_IMAGES_PER_BANK=3
>  CONFIG_CMD_FWU_METADATA=y
>  CONFIG_FWU_MDATA_V2=y
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> ---
> 
>  board/st/stm32mp1/stm32mp1.c          | 33 +++++++++++++++++++++++++++
>  include/configs/stm32mp15_st_common.h | 15 ++++++++++++
>  2 files changed, 48 insertions(+)
> 
> diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
> index 88ede4e39106..8164a62e9a3a 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -857,4 +857,37 @@ void fwu_plat_get_bootidx(uint *boot_idx)
>  	*boot_idx = (readl(TAMP_FWU_BOOT_INFO_REG) >>
>  		    TAMP_FWU_BOOT_IDX_OFFSET) & TAMP_FWU_BOOT_IDX_MASK;
>  }
> +
> +int fwu_platform_hook(struct udevice *dev, struct fwu_data *data)
> +{
> +	uint boot_idx;
> +	efi_guid_t boot_uuid, root_uuid;
> +	const efi_guid_t boot_type_guid = PARTITION_XBOOTLDR;
> +	const efi_guid_t root_type_guid =
> +		PARTITION_LINUX_FILE_SYSTEM_DATA_GUID;
> +	char uuidbuf[UUID_STR_LEN + 1];
> +	int retb, retr;
> +
> +	fwu_plat_get_bootidx(&boot_idx);
> +
> +	retb = fwu_mdata_get_image_guid(&boot_uuid, &boot_type_guid, boot_idx);
> +	retr = fwu_mdata_get_image_guid(&root_uuid, &root_type_guid, boot_idx);
> +
> +	if (!retb && !retr) {
> +		uuid_bin_to_str(boot_uuid.b, uuidbuf, UUID_STR_FORMAT_GUID);
> +		env_set("boot_partuuid", uuidbuf);
> +
> +		uuid_bin_to_str(root_uuid.b, uuidbuf, UUID_STR_FORMAT_GUID);
> +		env_set("root_partuuid", uuidbuf);
> +	} else if (!retb && retr) {
> +		log_warning("%s: found boot GUID but missing root GUID (%d)\n",
> +			    __func__, retr);
> +	} else if (!retr && retb) {
> +		log_warning("%s: found root GUID but missing boot GUID (%d)\n",
> +			    __func__, retb);
> +	}
> +
> +	return 0;
> +}
>  #endif /* CONFIG_FWU_MULTI_BANK_UPDATE */
> +
> diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h
> index 60838cb0e3f0..7727e583fc77 100644
> --- a/include/configs/stm32mp15_st_common.h
> +++ b/include/configs/stm32mp15_st_common.h
> @@ -8,7 +8,22 @@
>  #ifndef __CONFIG_STM32MP15_ST_COMMON_H__
>  #define __CONFIG_STM32MP15_ST_COMMON_H__
>  
> +#ifdef CONFIG_FWU_MULTI_BANK_UPDATE
> +#define SCAN_DEV_FOR_BOOT_PARTS \
> +	"setenv devplist; " \
> +	"env exists boot_partuuid && " \
> +		"part number ${devtype} ${devnum} ${boot_partuuid} devplist; " \
> +	"env exists devplist || " \
> +		"part list ${devtype} ${devnum} -bootable devplist; "
> +
> +#define ST_STM32MP15_FWU_ENV \
> +	"altbootcmd=${bootcmd}\0"
> +#else
> +#define ST_STM32MP15_FWU_ENV
> +#endif
> +
>  #define STM32MP_BOARD_EXTRA_ENV \
> +	ST_STM32MP15_FWU_ENV \
>  	"usb_pgood_delay=2000\0" \
>  	"console=ttySTM0\0" \
>  	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \


Applied to u-boot-stm32/master

Thanks
Patrice