[PATCH v3 3/7] sysinfo: tq_eeprom: new driver
Alexander Feilke
Alexander.Feilke at ew.tq-group.com
Wed May 27 11:51:19 CEST 2026
From: Nora Schiffer <nora.schiffer at ew.tq-group.com>
Introduce a sysinfo driver that can be instantiated from the device,
which will provide information from the EEPROM found on all TQ-Systems
SoMs.
Signed-off-by: Nora Schiffer <nora.schiffer at ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel at ew.tq-group.com>
Signed-off-by: Alexander Feilke <alexander.feilke at ew.tq-group.com>
---
MAINTAINERS | 1 +
configs/tqma7_common.config | 1 +
.../sysinfo/tq,eeprom-sysinfo.txt | 36 ++++
drivers/sysinfo/Kconfig | 8 +
drivers/sysinfo/Makefile | 1 +
drivers/sysinfo/tq_eeprom.c | 203 ++++++++++++++++++
include/sysinfo/tq_eeprom.h | 24 +++
7 files changed, 274 insertions(+)
create mode 100644 doc/device-tree-bindings/sysinfo/tq,eeprom-sysinfo.txt
create mode 100644 drivers/sysinfo/tq_eeprom.c
create mode 100644 include/sysinfo/tq_eeprom.h
diff --git a/MAINTAINERS b/MAINTAINERS
index ea646f618a5..4ac87264090 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1877,6 +1877,7 @@ S: Maintained
W: https://www.tq-group.com/en/products/tq-embedded/
F: board/tq/*
F: doc/board/tq/*
+F: drivers/sysinfo/tq_eeprom.c
F: include/configs/tq*.h
F: include/env/tq/*
diff --git a/configs/tqma7_common.config b/configs/tqma7_common.config
index 7e5e31a14ab..9b055849ad1 100644
--- a/configs/tqma7_common.config
+++ b/configs/tqma7_common.config
@@ -77,6 +77,7 @@ CONFIG_I2C_DEFAULT_BUS_NUMBER=0x3
CONFIG_SYS_I2C_MXC=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
+CONFIG_NVMEM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
diff --git a/doc/device-tree-bindings/sysinfo/tq,eeprom-sysinfo.txt b/doc/device-tree-bindings/sysinfo/tq,eeprom-sysinfo.txt
new file mode 100644
index 00000000000..678fff0e812
--- /dev/null
+++ b/doc/device-tree-bindings/sysinfo/tq,eeprom-sysinfo.txt
@@ -0,0 +1,36 @@
+TQ EEPROM Sysinfo Driver
+------------------------
+
+This binding describes a sysinfo provider which retrieves system
+identification information from an I2C EEPROM device.
+
+Required properties:
+
+- compatible: "tq,eeprom-sysinfo"
+- nvmem-cells: phandle referencing the nvmem cell
+- nvmem-cell-names: string, should be "device_info"
+
+Example:
+
+&i2c1 {
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ module_info: module-info at 20 {
+ reg = <0x20 0x60>;
+ };
+ };
+ };
+};
+
+sysinfo {
+ compatible = "tq,eeprom-sysinfo";
+ nvmem-cells = <&module_info>;
+ nvmem-cell-names = "device_info";
+};
diff --git a/drivers/sysinfo/Kconfig b/drivers/sysinfo/Kconfig
index df83df69ffb..6922dac9170 100644
--- a/drivers/sysinfo/Kconfig
+++ b/drivers/sysinfo/Kconfig
@@ -59,4 +59,12 @@ config SYSINFO_GPIO
This ternary number is then mapped to a board revision name using
device tree properties.
+config SYSINFO_TQ_EEPROM
+ bool "Enable TQ-Systems EEPROM sysinfo driver"
+ depends on I2C_EEPROM
+ depends on SPL_I2C_EEPROM || !SPL_SYSINFO
+ help
+ Support querying EEPROM of TQ-Systems SOMs to determine board
+ information.
+
endif
diff --git a/drivers/sysinfo/Makefile b/drivers/sysinfo/Makefile
index 26ca3150999..d21fb3c2270 100644
--- a/drivers/sysinfo/Makefile
+++ b/drivers/sysinfo/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_SYSINFO_IOT2050) += iot2050.o
obj-$(CONFIG_SYSINFO_RCAR3) += rcar3.o
obj-$(CONFIG_SYSINFO_SANDBOX) += sandbox.o
obj-$(CONFIG_SYSINFO_SMBIOS) += smbios.o
+obj-$(CONFIG_SYSINFO_TQ_EEPROM) += tq_eeprom.o
diff --git a/drivers/sysinfo/tq_eeprom.c b/drivers/sysinfo/tq_eeprom.c
new file mode 100644
index 00000000000..63be07b664e
--- /dev/null
+++ b/drivers/sysinfo/tq_eeprom.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014-2026 TQ-Systems GmbH <u-boot at ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Nora Schiffer
+ */
+
+#include <dm.h>
+#include <log.h>
+#include <net.h>
+#include <dm/device_compat.h>
+#include <linux/build_bug.h>
+#include <linux/ctype.h>
+#include <nvmem.h>
+#include <sysinfo/tq_eeprom.h>
+
+#define TQ_EE_RSV1_BYTES 10
+#define TQ_EE_SERIAL_BYTES 8
+#define TQ_EE_RSV2_BYTES 8
+#define TQ_EE_BDID_BYTES 0x40
+
+struct tq_eeprom_data {
+ u8 mac[ETH_ALEN]; /* 0x20 ... 0x25 */
+ u8 rsv1[TQ_EE_RSV1_BYTES];
+ u8 serial[TQ_EE_SERIAL_BYTES]; /* 0x30 ... 0x37 */
+ u8 rsv2[TQ_EE_RSV2_BYTES];
+ u8 id[TQ_EE_BDID_BYTES]; /* 0x40 ... 0x7f */
+};
+
+static_assert(sizeof(struct tq_eeprom_data) == 0x60,
+ "struct tq_eeprom_data has incorrect size");
+
+/**
+ * struct sysinfo_tq_eeprom_priv - sysinfo private data
+ */
+struct sysinfo_tq_eeprom_priv {
+ struct nvmem_cell device_info_cell;
+
+ /* Reserve extra space for \0 in id and serial */
+ char id[TQ_EE_BDID_BYTES + 1];
+ char serial[TQ_EE_SERIAL_BYTES + 1];
+ u8 mac[ETH_ALEN];
+};
+
+static void tq_eeprom_parse_id(struct udevice *dev, const struct tq_eeprom_data *data)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+ int i;
+
+ for (i = 0; i < sizeof(data->id); i++) {
+ if (!(isprint(data->id[i]) && isascii(data->id[i])))
+ break;
+ }
+
+ if (i == 0)
+ dev_warn(dev, "no valid model name in EEPROM\n");
+
+ snprintf(priv->id, sizeof(priv->id), "%.*s", i, data->id);
+}
+
+static int tq_eeprom_serial_len(const struct tq_eeprom_data *data, bool allow_upper)
+{
+ int i;
+
+ for (i = 0; i < sizeof(data->serial); i++) {
+ if (!(isdigit(data->serial[i]) || (allow_upper && isupper(data->serial[i]))))
+ break;
+ }
+
+ return i;
+}
+
+static void tq_eeprom_parse_serial(struct udevice *dev, const struct tq_eeprom_data *data)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+ bool use_new_format;
+ int len;
+
+ use_new_format = data->serial[0] == 'T' && data->serial[1] == 'Q';
+
+ len = tq_eeprom_serial_len(data, use_new_format);
+
+ /* For now, only serial numbers with the exact size of the field are accepted */
+ if (len != sizeof(data->serial)) {
+ dev_warn(dev, "no valid serial number in EEPROM\n");
+ len = 0;
+ }
+
+ snprintf(priv->serial, sizeof(priv->serial), "%.*s", len, data->serial);
+}
+
+static int tq_eeprom_dump(const struct sysinfo_tq_eeprom_priv *priv)
+{
+ printf("TQ EEPROM:\n");
+ printf(" ID: %s\n", priv->id[0] ? priv->id : "<invalid>");
+ printf(" SN: %s\n", priv->serial[0] ? priv->serial : "<invalid>");
+ printf(" MAC: ");
+ if (is_valid_ethaddr(priv->mac))
+ printf("%pM\n", priv->mac);
+ else
+ printf("<invalid>\n");
+
+ return 0;
+}
+
+static int sysinfo_tq_eeprom_detect(struct udevice *dev)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+ struct tq_eeprom_data data;
+ int ret;
+
+ ret = nvmem_cell_read(&priv->device_info_cell, (u8 *)&data, sizeof(data));
+ if (ret < 0) {
+ dev_err(dev, "EEPROM read failed: %d\n", ret);
+ return ret;
+ }
+
+ tq_eeprom_parse_id(dev, &data);
+ tq_eeprom_parse_serial(dev, &data);
+ memcpy(priv->mac, data.mac, ETH_ALEN);
+
+ if (!IS_ENABLED(CONFIG_SPL_BUILD))
+ tq_eeprom_dump(priv);
+
+ return 0;
+}
+
+static int sysinfo_tq_eeprom_get_str(struct udevice *dev, int id, size_t size, char *val)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+
+ switch (id) {
+ case SYSID_TQ_MODEL:
+ if (!priv->id[0])
+ return -ENODATA;
+
+ strlcpy(val, priv->id, size);
+ return 0;
+
+ case SYSID_TQ_SERIAL:
+ if (!priv->serial[0])
+ return -ENODATA;
+
+ strlcpy(val, priv->serial, size);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sysinfo_tq_eeprom_get_data(struct udevice *dev, int id, void **data, size_t *size)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+
+ switch (id) {
+ case SYSID_TQ_MAC_ADDR:
+ if (!is_valid_ethaddr(priv->mac))
+ return -ENODATA;
+
+ *data = priv->mac;
+ *size = sizeof(priv->mac);
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct sysinfo_ops sysinfo_tq_eeprom_ops = {
+ .detect = sysinfo_tq_eeprom_detect,
+ .get_str = sysinfo_tq_eeprom_get_str,
+ .get_data = sysinfo_tq_eeprom_get_data,
+};
+
+static int sysinfo_tq_eeprom_probe(struct udevice *dev)
+{
+ struct sysinfo_tq_eeprom_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = nvmem_cell_get_by_name(dev, "device_info", &priv->device_info_cell);
+ if (ret) {
+ dev_err(dev, "device_info not found: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sysinfo_tq_eeprom_ids[] = {
+ { .compatible = "tq,eeprom-sysinfo" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(sysinfo_tq_eeprom) = {
+ .name = "sysinfo_tq_eeprom",
+ .id = UCLASS_SYSINFO,
+ .of_match = sysinfo_tq_eeprom_ids,
+ .ops = &sysinfo_tq_eeprom_ops,
+ .priv_auto = sizeof(struct sysinfo_tq_eeprom_priv),
+ .probe = sysinfo_tq_eeprom_probe,
+};
diff --git a/include/sysinfo/tq_eeprom.h b/include/sysinfo/tq_eeprom.h
new file mode 100644
index 00000000000..6b1bddd7ce0
--- /dev/null
+++ b/include/sysinfo/tq_eeprom.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2023-2026 TQ-Systems GmbH <u-boot at ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Nora Schiffer
+ */
+
+#ifndef __SYSINFO_TQ_EEPROM_H__
+#define __SYSINFO_TQ_EEPROM_H__
+
+#include <sysinfo.h>
+
+enum {
+ /* Model string of TQ-Systems SOM. This is different from BOARD_MODEL,
+ * which usually combines SOM and baseboard names for TQ hardware
+ */
+ SYSID_TQ_MODEL = SYSID_USER,
+ /* SOM serial number */
+ SYSID_TQ_SERIAL,
+ /* MAC address */
+ SYSID_TQ_MAC_ADDR,
+};
+
+#endif /* __SYSINFO_TQ_EEPROM_H__ */
--
2.34.1
More information about the U-Boot
mailing list