[PATCH v3 07/12] rockchip: reset: make reset-rockchip available in SPL

[Johan Jonker]

Make reset-rockchip available for use with dwc2 phy
in SPL to load U-boot (full) from a USB disk.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 drivers/reset/Kconfig  | 9 +++++++++
 drivers/reset/Makefile | 4 ++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 66911199c8ba..10aa1ee9598b 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -100,6 +100,15 @@ config RESET_ROCKCHIP
 	  though is that some reset signals, like I2C or MISC reset multiple
 	  devices.

+config SPL_RESET_ROCKCHIP
+	bool "Reset controller driver for Rockchip SoCs in SPL"
+	depends on SPL_DM_RESET && ARCH_ROCKCHIP && SPL_CLK
+	default n
+	help
+	  Support for reset controller on rockchip SoC. The main limitation
+	  though is that some reset signals, like I2C or MISC reset multiple
+	  devices.
+
 config RESET_HSDK
 	bool "Synopsys HSDK Reset Driver"
 	depends on DM_RESET && TARGET_HSDK
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 088545c64733..afb54b24ac95 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,7 +3,7 @@
 # Copyright (c) 2016, NVIDIA CORPORATION.
 #

-obj-$(CONFIG_DM_RESET) += reset-uclass.o
+obj-$(CONFIG_$(PHASE_)DM_RESET) += reset-uclass.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o
 obj-$(CONFIG_STI_RESET) += sti-reset.o
@@ -16,7 +16,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_AST2500) += reset-ast2500.o
 obj-$(CONFIG_RESET_AST2600) += reset-ast2600.o
-obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o rst-rk3506.o rst-rk3528.o rst-rk3576.o rst-rk3588.o
+obj-$(CONFIG_$(PHASE_)RESET_ROCKCHIP) += reset-rockchip.o rst-rk3506.o rst-rk3528.o rst-rk3576.o rst-rk3588.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_MEDIATEK) += reset-mediatek.o
--
2.39.5