[U-Boot-Users] Marvell 88E1111 PHY

[David Grab]

Hello,

my u-boot is now booting from flash. Big thanks to everyone helped me. ;-)

But now i am configuring ethernet in u-boot for my 440GX Board. It uses
Marvel 88E1111 PHY´s. Did someone worked with this PHY and u-boot or knows
if it is supported?

config file definitions:

#define CONFIG_MII		1	/* MII PHY management		*/
#define CONFIG_PHY_ADDR		0x5	/* PHY address, See schematics	*/
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
#define CONFIG_NETMASK		255.255.252.0
#define CONFIG_IPADDR		192.168.0.116
#define CONFIG_ETHADDR		00:04:AC:E3:28:8A

#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
				CFG_CMD_IRQ	| \
				CFG_CMD_I2C	| \
				CFG_CMD_BEDBUG	| \
				CFG_CMD_ENV	| \
				CFG_CMD_MII	| \
				CFG_CMD_DIAG	| \
				CFG_CMD_PING	| \
				CFG_CMD_NET	| \
				CFG_CMD_ELF	)

Thanks for any help,

David