[U-Boot-Users] Marvell 88E1111 PHY
Gerhard Jaeger
g.jaeger at sysgo.com
Wed Jun 15 12:10:46 CEST 2005
On Wednesday 15 June 2005 11:59, David Grab wrote:
> Hello,
>
> my u-boot is now booting from flash. Big thanks to everyone helped me. ;-)
>
> But now i am configuring ethernet in u-boot for my 440GX Board. It uses
> Marvel 88E1111 PHY´s. Did someone worked with this PHY and u-boot or knows
> if it is supported?
>
> config file definitions:
>
> #define CONFIG_MII 1 /* MII PHY management */
> #define CONFIG_PHY_ADDR 0x5 /* PHY address, See schematics */
> #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
> #define CONFIG_NETMASK 255.255.252.0
> #define CONFIG_IPADDR 192.168.0.116
> #define CONFIG_ETHADDR 00:04:AC:E3:28:8A
>
> #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
> CFG_CMD_IRQ | \
> CFG_CMD_I2C | \
> CFG_CMD_BEDBUG | \
> CFG_CMD_ENV | \
> CFG_CMD_MII | \
> CFG_CMD_DIAG | \
> CFG_CMD_PING | \
> CFG_CMD_NET | \
> CFG_CMD_ELF )
>
> Thanks for any help,
>
Hi,
I know, that the MPC85xx CPU specific part contains support for the Marvel 88E1111,
check the file tsec.c in u-boot/cpu/mpc85xx
Hope this help
Gerhard
--
Gerhard Jaeger <gjaeger at sysgo.com>
SYSGO AG Embedded and Real-Time Software
www.sysgo.com | www.elinos.com | www.pikeos.com | www.osek.de
More information about the U-Boot
mailing list