[U-Boot] [PATCH v4] avr32: add grasshopper (ICnova AP7000) board

[Andreas Bießmann]

Dear Reinhard Meyer,

you took the at91 related patches today.

Am 01.07.2011 16:47, schrieb Andreas Bießmann:
> The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit
> GmbH.
> See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
> for detailed information about this device.
> 
> Signed-off-by: Andreas Bießmann <biessmann at corscience.de>
> ---
> changes since v1:
>  - use vim: set noet ts=8 for 80 char per line checking
>  - replace blank indention by tab indention
>  - add board_early_init_r to explicitely set the phy address to 0x00
> 
> changes since v2:
>  - add MAINTAINERS entry
> 
> chganges since v3:
>  - remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this
>    patch is defective since '�' in MAINTAINERS is ISO-8859-1 coded and
>    everywhere else it is UTF-8 coded.
> 
>  MAINTAINERS                                |    1 +
>  board/in-circuit/grasshopper/Makefile      |   45 +++++++
>  board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
>  boards.cfg                                 |    1 +
>  include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
>  5 files changed, 357 insertions(+), 0 deletions(-)
>  create mode 100644 board/in-circuit/grasshopper/Makefile
>  create mode 100644 board/in-circuit/grasshopper/grasshopper.c
>  create mode 100644 include/configs/grasshopper.h

Any objections to this patch? v4 was out before the merge window closed.
I know you are right before your holiday ... but it would be great if
you take this too.

best regards

Andreas Bießmann