[U-Boot] [PATCH v4] avr32: add grasshopper (ICnova AP7000) board

[Reinhard Meyer]

Dear Andreas Bießmann:
> Am 01.07.2011 16:47, schrieb Andreas Bießmann:
> > The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit
> > GmbH.
> > See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html
> > for detailed information about this device.
> > 
> > Signed-off-by: Andreas Bießmann <biessmann at corscience.de>
> > ---
> > changes since v1:
> >  - use vim: set noet ts=8 for 80 char per line checking
> >  - replace blank indention by tab indention
> >  - add board_early_init_r to explicitely set the phy address to 0x00
> > 
> > changes since v2:
> >  - add MAINTAINERS entry
> > 
> > chganges since v3:
> >  - remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of this
> >    patch is defective since '�' in MAINTAINERS is ISO-8859-1 coded and
> >    everywhere else it is UTF-8 coded.
> > 
> >  MAINTAINERS                                |    1 +
> >  board/in-circuit/grasshopper/Makefile      |   45 +++++++
> >  board/in-circuit/grasshopper/grasshopper.c |  112 ++++++++++++++++
> >  boards.cfg                                 |    1 +
> >  include/configs/grasshopper.h              |  198 ++++++++++++++++++++++++++++
> >  5 files changed, 357 insertions(+), 0 deletions(-)
> >  create mode 100644 board/in-circuit/grasshopper/Makefile
> >  create mode 100644 board/in-circuit/grasshopper/grasshopper.c
> >  create mode 100644 include/configs/grasshopper.h
> 
> Any objections to this patch? v4 was out before the merge window closed.
> I know you are right before your holiday ... but it would be great if
> you take this too.
No objections. Applied to u-boot-atmel/master.
Thanks, Reinhard