[U-Boot] [PATCH 6/8] arm kirkwood add MVSDIO sheevaplug support

[DrEagle]

    - add sheevaplug MVSDIO driver support

    Signed-off-by: drEagle <uboot at doukki.net>

 board/Marvell/sheevaplug/sheevaplug.c          |
 include/configs/sheevaplug.h                   |

diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 16efe64..2bd2568 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -28,6 +28,9 @@
 #include <asm/arch/kirkwood.h>
 #include <asm/arch/mpp.h>
 #include "sheevaplug.h"
+#ifdef CONFIG_MRVL_MMC
+#include <mrvl_mmc.h>
+#endif /* CONFIG_MRVL_MMC */
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -147,3 +150,11 @@ void reset_phy(void)
 	printf("88E1116 Initialized on %s\n", name);
 }
 #endif /* CONFIG_RESET_PHY_R */
+
+#ifdef CONFIG_MRVL_MMC
+int board_mmc_init(bd_t *bis)
+{
+	mrvl_mmc_initialize(bis);
+	return 0;
+}
+#endif /* CONFIG_MRVL_MMC */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 83dd8ff..270fd56 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -39,17 +40,24 @@
 /*
  * Commands configuration
  */

 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB

 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -98,17 +138,20 @@
 #endif /* CONFIG_CMD_NET */
 
 /*
 * File system
 */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO

+/*
+ * SDIO/MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MRVL_MMC
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* CONFIG_CMD_MMC */
 
 #endif /* _CONFIG_SHEEVAPLUG_H */