[U-Boot] U-boot timeout with KSZ8021 phy

[Marek Vasut]

Dear Alexandre Pereira da Silva,

> On Thu, Jul 11, 2013 at 5:36 PM, Marek Vasut <marex at denx.de> wrote:
> > Dear Alexandre Pereira da Silva,
> > 
> >> On Thu, Jul 11, 2013 at 4:55 PM, Marek Vasut <marex at denx.de> wrote:
> > Make sure to check the direction too, it can go either from phy to fec or
> > the other way IIRC.
> 
> Ok, it seems this was caused by a bad tftp server and not by the board
> itself.
> 
> I can confirm KSZ8021 is functional, after defining CONFIG_PHYLIB to
> mx28evk.h

OK, good to hear! Btw. the MX28EVK uses LAN8720 PHY, it is the M28EVK that uses 
the Micrel PHY.

btw. I suspect you should really split away your platform into separate space 
instead of hacking around various boards ;-)

Best regards,
Marek Vasut