[U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address

[Heiko Schocher]

Hello Michael,

Am 15.10.2013 22:23, schrieb Michael Burr:
>> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read'
> Further minor corrections:
>> Write 'address' register before 'data' register.
>> Write 'transfer_size' register before 'address' register.
>
> Signed-off-by: Michael Burr <michael.burr at logicpd.com>
> Cc: Heiko Schocher <hs at denx.de>
> Cc: Michal Simek <monstr at monstr.eu>
>
> ---
> Tested:
> Xilinx ZC702 eval board.
> Write and read registers with addresses of length 0 and 1.
>
> Change history:
>> v2: put this in a series instead of by itself
>> v3: fixed formatting problem in patch message
>> v4: _really_ fixed this time!
>> v5: yet another try
>> v6: one more time
>> v7: again
>  > v8: After trying many times, I cannot get Patchwork to properly understand the diff in this message. As a workaround, please accept the diff in my patch of 2013-09-24, titled "[U-Boot] I2C: Zynq: Support for 0-length register address", which is 100%
> equivalent to the patch in this message (1/2). It should still be applied before the patch in the second message (2/2).

Hmm.. please try to post a correct version of this patch, as I not
really want to search the correct patch ... I am sure I will pick up
the wrong version and I cannot test anything.

Thanks!

Hmm.. if you have problems with your commit message, you can reedit
it:
- get the commit id before your commit you want to edit
- "git rebase -i commit-id"
   -> you get a list of commits, see for help maybe here:
      https://help.github.com/articles/interactive-rebase

Please remove the ">" in your commit message ... maybe this confuses
patchwork ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany