October 2013 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Oct 1 00:11:48 CEST 2013
Ending: Thu Oct 31 23:43:10 CET 2013
Messages: 2075

• [U-Boot] [PATCH] config: Add a default CONFIG_SYS_PROMPT   Rob Herring
• [U-Boot] [PATCH] config: Add a default CONFIG_SYS_PROMPT   Fabio Estevam
• [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Scott Wood
  • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
    • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Scott Wood
      • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Scott Wood
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Scott Wood
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Scott Wood
      • [U-Boot] [PATCH 7/9][v3] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Timur Tabi
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Timur Tabi
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Timur Tabi
      • [U-Boot] [PATCH 7/9][v2] net: tsec: Use portable types and accessors for BDs   Scott Wood
      • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
• [U-Boot] declaring and initializing variables   York Sun
  • [U-Boot] declaring and initializing variables   Timur Tabi
  • [U-Boot] declaring and initializing variables   Kim Phillips
    • [U-Boot] declaring and initializing variables   York Sun
      • [U-Boot] declaring and initializing variables   Kim Phillips
• [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   Scott Wood
  • [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   FengHua
    • [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   Scott Wood
      • [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   FengHua
      • [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   Scott Wood
      • [U-Boot] [PATCH v4 3/4] generic board patch of manual reloc and zero gd_t   FengHua
• [U-Boot] Dual boot Images in Flash   Gupta, Pekon
  • [U-Boot] Dual boot Images in Flash   Wolfgang Denk
    • [U-Boot] Dual boot Images in Flash   Gupta, Pekon
      • [U-Boot] Dual boot Images in Flash   pshambhu
• [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Heiko Schocher
  • [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Naveen Krishna Ch
• [U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Tom Rini
  • [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [PATCH] powerpc/t1040: enable PBL tool for T1040   Prabhakar Kushwaha
  • [U-Boot] [PATCH 0/6] powerpc: Add support 2 stage boot loader for corenet platform   Prabhakar Kushwaha
  • [U-Boot] [PATCH 1/6] powerpc:Add support of SPL non-relocation   Prabhakar Kushwaha
  • [U-Boot] [PATCH 2/6] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH 3/6] common/env: Point default envirenoment for GD   Prabhakar Kushwaha
  • [U-Boot] [PATCH 3/6] common/env: Point default envirenoment for GD   York Sun
  • [U-Boot] [PATCH 4/6] Makefile:Add u-boot-with-spl-pbl.bin target for SPL   Prabhakar Kushwaha
  • [U-Boot] [PATCH 5/6] SPL:Defines function required to env read for IFC & env_nand   Prabhakar Kushwaha
  • [U-Boot] [PATCH 6/6] T1040QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
• [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro   Stefano Babic
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Mark Jackson
  • [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
• [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Stefano Babic
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Otavio Salvador
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Marek Vasut
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Otavio Salvador
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Eric Nelson
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Stefano Babic
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Eric Nelson
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Stefano Babic
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Eric Nelson
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Stefano Babic
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Eric Nelson
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Otavio Salvador
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Benoît Thébaudeau
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Fabio Estevam
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Eric Nelson
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Stefano Babic
  • [U-Boot] [PATCH] mx6: Add IOMUX_CONFIG_SION flag to all GPIO pins   Benoît Thébaudeau
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Pantelis Antoniou
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Pantelis Antoniou
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Przemyslaw Marczak
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Pantelis Antoniou
  • [U-Boot] [PATCH v2] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Mateusz Zalega
  • [U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation.   Pantelis Antoniou
  • [U-Boot] Dual boot Images in Flash   pshambhu
    • [U-Boot] Dual boot Images in Flash   Wolfgang Denk
      • [U-Boot] Dual boot Images in Flash   pshambhu
      • [U-Boot] Dual boot Images in Flash   Wolfgang Denk
      • [U-Boot] [PATCH 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420   Leela Krishna Amudala
      • [U-Boot] [PATCH 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
      • [U-Boot] [PATCH 1/6] exynos: Use common pmic_reg_update() definition   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Heiko Schocher
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Heiko Schocher
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Lukasz Majewski
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Heiko Schocher
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
      • [U-Boot] [PATCH 2/6] power: Explicitly select pmic device's bus   Lukasz Majewski
      • [U-Boot] [PATCH 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Leela Krishna Amudala
      • [U-Boot] [PATCH 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Leela Krishna Amudala
      • [U-Boot] [PATCH 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Lukasz Majewski
      • [U-Boot] [PATCH 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
      • [U-Boot] [PATCH 6/6] config: SMDK5420: Enable S2MPS1111111111111111111111 pmic   Leela Krishna Amudala
      • [U-Boot] [PATCH 6/6] config: SMDK5420: Enable S2MPS1111111111111111111111 pmic   Leela Krishna Amudala
      • [U-Boot] [PATCH] usb: Fix error handling in musb_hcd.c   Andrew Murray
      • [U-Boot] [PATCH] usb: Fix error handling in musb_hcd.c   Marek Vasut
      • [U-Boot] [PATCH v3 1/2] Tegra114: Fix PLLX M, N, P init settings   Thierry Reding
      • [U-Boot] [PATCH v3 2/2] Tegra114: Do not program CPCON field for PLLX   Thierry Reding
• [U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX   Thierry Reding
  • [U-Boot] [PATCH v2 2/2] Tegra114: Do not program CPCON field for PLLX   Tom Warren
• [U-Boot] SPL: Reading large files with file_fat_read()   bin4ry
• [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   York Sun
  • [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   Tang Yuantian-B29983
  • [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   York Sun
  • [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   York Sun
  • [U-Boot] [PATCH] mpc85xx: Fix the offset of register address error   Tang Yuantian-B29983
• [U-Boot] [PATCH][v2] boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLD   York Sun
• [U-Boot] uboot panic in get_ticks   Simon Glass
  • [U-Boot] [PATCH] am335x: Enable CONFIG_OMAP_WATCHDOG support   Tom Rini
  • [U-Boot] [PATCH 0/2] mmc: Fix capacity calculation and erase_group_size   Oliver Metz
  • [U-Boot] [PATCH 1/2] mmc: Fix calculation of capacity for hc cards   Oliver Metz
  • [U-Boot] [PATCH 1/2] mmc: Fix calculation of capacity for hc cards   Pantelis Antoniou
  • [U-Boot] [PATCH 2/2] mmc: Fix erase_grp_size for partitioned card   Oliver Metz
  • [U-Boot] [PATCH 2/2] mmc: Fix erase_grp_size for partitioned card   Pantelis Antoniou
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Chin Liang See
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
  • [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Gupta, Pekon
    • [U-Boot] [PATCH] RFC: Adjustments to dumpimage for Guilherme   Simon Glass
• [U-Boot] Buildman changes for release   Simon Glass
  • [U-Boot] Buildman changes for release   Tom Rini
• [U-Boot] [RFD] OMAP5: Working HYP mode   Alexander Tarasikov
  • [U-Boot] U-Boot DM2 status   Simon Glass
  • [U-Boot] [PATCH v7 09/11] arm: add customized boot command for Faraday Images   Kuo-Jung Su
• [U-Boot] [PATCH v2 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
• [U-Boot] imximage on the MX50   Andre Renaud
  • [U-Boot] imximage on the MX50   Stefano Babic
    • [U-Boot] imximage on the MX50   Andre Renaud
      • [U-Boot] imximage on the MX50   Stefano Babic
• [U-Boot] [U-boot] SPL: Reading large files with file_fat_read()   bin4ry
• [U-Boot] [PPC] get_timer without CONFIG_INTERRUPTS   Chris Packham
  • [U-Boot] [PPC] get_timer without CONFIG_INTERRUPTS   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Stefano Babic
  • [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Fabio Estevam
    • [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Stefano Babic
    • [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Fabio Estevam
    • [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Stefano Babic
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Pull request for u-boot-marvell.git   Albert ARIBAUD
  • [U-Boot] Pull request for u-boot-marvell.git   Holger Brunck
    • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
    • [U-Boot] Pull request for u-boot-marvell.git   Holger Brunck
    • [U-Boot] Pull request for u-boot-marvell.git   Prafulla Wadaskar
    • [U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards   Tom Rini
      • [U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards   Igor Grinberg
      • [U-Boot] [PATCH 0/2] compulab: adjustments before porting more boards   Igor Grinberg
    • [U-Boot] [PATCH 1/2] SPL: Add CONFIG_SPL_BOOTCOUNT_SUPPORT   Tom Rini
• [U-Boot] [PULL] : Please pull u-boot-imx   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] exynos: i2c: Fix i2c driver to handle NACKs properly   Heiko Schocher
  • [U-Boot] [PATCH 0/8] Secure boot improvements and test on Beaglebone Black   Simon Glass
  • [U-Boot] [PATCH 1/8] am33xx/omap: Allow cache enable for all Sitara/OMAP   Simon Glass
  • [U-Boot] [PATCH 2/8] hash: Export functions to find and show hash   Simon Glass
  • [U-Boot] [PATCH 3/8] fdt: Add DEV_TREE_BIN option to specify a device tree binary file   Simon Glass
  • [U-Boot] [PATCH 4/8] fdt: Update functions which write to an FDT to return -ENOSPC   Simon Glass
  • [U-Boot] [PATCH 5/8] arm: ti: Increase malloc size to 16MB for armv7 boards   Simon Glass
  • [U-Boot] [PATCH 6/8] RFC: am33xx/omap: Enable CONFIG_OF_CONTROL   Simon Glass
  • [U-Boot] [PATCH 7/8] RFC: am33xx/omap: Enable FIT support   Simon Glass
  • [U-Boot] [PATCH 8/8] RFC: am33xx/omap: Enable secure boot with CONFIG_FIT_SIGNATURE   Simon Glass
  • [U-Boot] [PATCH 0/2] Add bootcount support to SPL   Tom Rini
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] [PATCH v5 00/32] sf: Add new probe support   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 01/32] sf: Divide spi_flash into multiple parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 02/32] sf: probe: Add new spi_flash_probe support   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 03/32] sf: probe: Add support for M25P* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 04/32] sf: probe: Add support for EN25Q* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 05/32] sf: probe: Add support for GD25* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 06/32] sf: probe: Add support for MX25L* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 07/32] sf: probe: Add support for W25* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 08/32] sf: probe: Add support for S25FL* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 09/32] sf: probe: Add support for SST25* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 10/32] sf: probe: Add support for AT45DB* flash parts   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 11/32] sf: probe: Give proper spacing on flash table params   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 12/32] sf: probe: Add support for SST_WP   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 13/32] sf: probe: Add support to clear flash BP# bits   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 14/32] sf: probe: Add support for erase sector selection flag   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 15/32] sf: probe: Add support for flag status polling   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 16/32] sf: probe: Simply the BAR configuration logic   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 17/32] sf: Add proper comment style on spi_flash structure   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 18/32] sf: ramtron: Add support for separate flash driver   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 19/32] sf: Remove unneeded flash drivers files   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 20/32] sf: probe: Add support for EN25Q64   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 21/32] sf: probe: Add support for S25FL256S_256K   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 22/32] sf: probe: Add support for S25FL512S_256K   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 23/32] sf: probe: Use print_size arg as page_size   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 24/32] sf: probe: Print erase_size while printing flash details   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 25/32] sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 26/32] sf: probe: Add support for MX25L25635F   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 27/32] sf: probe: Add support for MX25L51235F   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 28/32] sf: Remove spi_flash_do_alloc references   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 29/32] sf: spi_flash cleanups   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 30/32] spi: spi cleanups   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 31/32] sf: Rename spi_flash files   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v5 32/32] doc: SPI: Add status.txt for tracking SPI subsys status   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Dan Murphy
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Tom Rini
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Dan Murphy
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Tom Rini
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Dan Murphy
  • [U-Boot] [PATCH] ARM: fdt support: Add usbethaddr as an acceptable MAC   Dan Murphy
  • [U-Boot] [PATCH v5] usb: new board-specific USB init interface   Mateusz Zalega
  • [U-Boot] [PATCH v5] usb: new board-specific USB init interface   Marek Vasut
  • [U-Boot] [ANN] v2013.10-rc4   Tom Rini
    • [U-Boot] [ANN] v2013.10-rc4   Albert ARIBAUD
    • [U-Boot] [ANN] v2013.10-rc4   Tom Rini
    • [U-Boot] [ANN] v2013.10-rc4   Scott Wood
    • [U-Boot] [ANN] v2013.10-rc4   Tom Rini
    • [U-Boot] [ANN] v2013.10-rc4   Holger Brunck
    • [U-Boot] [ANN] v2013.10-rc4   Tom Rini
• [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Albert ARIBAUD
  • [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Simon Glass
  • [U-Boot] [PATCH] config.mk: Add -Wundef to CFLAGS   Albert ARIBAUD
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
  • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
    • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Edgar E. Iglesias
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Michal Simek
      • [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/3] arm/km: add support for km_kirkwood_128m16 board   Albert ARIBAUD
• [U-Boot] [PATCH 1/1] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
  • [U-Boot] [PATCH 1/3][v4] mtd: move & update nand_ecclayout structure   Prabhakar Kushwaha
  • [U-Boot] [PATCH 2/3][v4] mtd/ifc: Add support of 8K page size NAND flash   Prabhakar Kushwaha
  • [U-Boot] [PATCH 3/3][v4] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
  • [U-Boot] [PATCH] driver/mtd/ifc: Read Status while programming NAND flash   Prabhakar Kushwaha
• [U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode   Albert ARIBAUD
  • [U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode   Christoffer Dall
    • [U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode   Albert ARIBAUD
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Ajay Kumar
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Ajay kumar
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Ajay kumar
  • [U-Boot] [PATCH 1/2] RFC: arm: add call to cleanup things before jumping into kernel   Simon Glass
  • [U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux   Ajay Kumar
  • [U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux   Albert ARIBAUD
  • [U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux   Ajay kumar
  • [U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux   Simon Glass
  • [U-Boot] [PATCH 2/2] RFC: exynos: Disable the display controller when starting Linux   Ajay kumar
  • [U-Boot] [PATCH v3 0/3] Trivial patches ready for merging   Otavio Salvador
  • [U-Boot] [PATCH v3 1/3] mtd: Fix function description in part_validate comment   Otavio Salvador
  • [U-Boot] [U-Boot, v3, 1/3] mtd: Fix function description in part_validate comment   Tom Rini
  • [U-Boot] [PATCH v3 3/3] doc: Fix a typo in the description in doc/README.JFFS2_NAND   Otavio Salvador
  • [U-Boot] [U-Boot, v3, 3/3] doc: Fix a typo in the description in doc/README.JFFS2_NAND   Tom Rini
  • [U-Boot] [PATCH v3 2/3] include/linux/fb.h: Add a missing include for 'list.h'   Otavio Salvador
  • [U-Boot] [U-Boot, v3, 2/3] include/linux/fb.h: Add a missing include for 'list.h'   Tom Rini
  • [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly   Naveen Krishna Chatradhi
  • [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly   Heiko Schocher
  • [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly   Naveen Krishna Ch
  • [U-Boot] [PATCH 1/3 v4] exynos: i2c: Fix i2c driver to handle NACKs properly   Naveen Krishna Chatradhi
  • [U-Boot] [U-Boot, 1/3, v4] exynos: i2c: Fix i2c driver to handle NACKs properly   Heiko Schocher
  • [U-Boot] [PATCH 2/3 v2] exynos: i2c: Change FDT bus setup code to enumerate ports correctly   Naveen Krishna Chatradhi
  • [U-Boot] [PATCH 3/3 v2]: i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Chatradhi
  • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
  • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Benoît Thébaudeau
  • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
  • [U-Boot] [PATCH 00/10] usb: Support for TIZEN's THOR download protocol   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Marek Vasut
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Marek Vasut
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Marek Vasut
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Lukasz Majewski
  • [U-Boot] [PATCH 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Marek Vasut
  • [U-Boot] [PATCH 02/10] dfu:core: Find DFU alt setting number by passing its name   Lukasz Majewski
  • [U-Boot] [PATCH 03/10] dfu:core: Export dfu_{get|free}_buf functions   Lukasz Majewski
  • [U-Boot] [PATCH 04/10] usb:g_dnl: Replace static usb_configuration structure with dynamically allocated one   Lukasz Majewski
  • [U-Boot] [PATCH 05/10] usb:g_dnl: Add name parameter to g_dnl_bind_fixup function   Lukasz Majewski
  • [U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Lukasz Majewski
  • [U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Marek Vasut
  • [U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Lukasz Majewski
  • [U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Marek Vasut
  • [U-Boot] [PATCH 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Lukasz Majewski
  • [U-Boot] [PATCH 07/10] usb:g_dnl: Support for TIZEN's THOR function at generic download code   Lukasz Majewski
  • [U-Boot] [PATCH 08/10] cmd:thor: Support for TIZEN's download (thordown) command   Lukasz Majewski
  • [U-Boot] [PATCH 09/10] samsung:common:thor: Define common Samsung code to handle THOR usb descriptor setup   Lukasz Majewski
  • [U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download   Lukasz Majewski
  • [U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download   Marek Vasut
  • [U-Boot] [PATCH 10/10] trats: Update TRATS config to support TIZEN download   Lukasz Majewski
  • [U-Boot] [PATCH v2 00/10] usb: Support for TIZEN's THOR download protocol   Lukasz Majewski
  • [U-Boot] [PATCH v2 01/10] usb:udc:s3c: Reduce dcache invalidate range for UDC receive buffer   Lukasz Majewski
  • [U-Boot] [PATCH v2 02/10] dfu:core: Find DFU alt setting number by passing its name   Lukasz Majewski
  • [U-Boot] [PATCH v2 03/10] dfu:core: Export dfu_{get|free}_buf functions   Lukasz Majewski
  • [U-Boot] [PATCH v2 04/10] usb:g_dnl: Replace static usb_configuration structure with dynamically allocated one   Lukasz Majewski
  • [U-Boot] [PATCH v2 05/10] usb:g_dnl: Add name parameter to g_dnl_bind_fixup function   Lukasz Majewski
  • [U-Boot] [PATCH v2 06/10] usb:g_dnl:f_thor: USB download function to support TIZEN's THOR protocol   Lukasz Majewski
  • [U-Boot] [PATCH v2 07/10] usb:g_dnl: Support for TIZEN's THOR function in generic download code   Lukasz Majewski
  • [U-Boot] [PATCH v2 08/10] cmd:thor: Support for TIZEN's download command (thordown)   Lukasz Majewski
  • [U-Boot] [PATCH v2 09/10] samsung:common:thor: Define common Samsung code to handle THOR usb descriptor setup   Lukasz Majewski
  • [U-Boot] [PATCH v2 10/10] trats: Update TRATS config to support TIZEN download   Lukasz Majewski
  • [U-Boot] [PATCH v2 00/10] usb: Support for TIZEN's THOR download protocol   Marek Vasut
  • [U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it   Otavio Salvador
  • [U-Boot] [PATCH 2/2] mtd: Fix size overflow   Otavio Salvador
  • [U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] mx28evk: Use 512k for fdt partition to align it   Otavio Salvador
• [U-Boot] [PATCH 1/2] Armada100: Adds SD/MMC Register definitions   Ajay Bhargav
  • [U-Boot] [PATCH v2] sf: probe: Add support for EN25S64   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2] sf: probe: Add support for EN25S64   Jagan Teki
• [U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data   Jagan Teki
  • [U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data   Sourav Poddar
    • [U-Boot] [Uboot][PATCH] drivers: spi: macronix: Add MX66L51235L data   Jagan Teki
  • [U-Boot] [PATCH] sf: spansion: Add support for S25FL512S_256K   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller.   Jagan Teki
      • [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller.   Jagan Teki
• [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver   Jagan Teki
  • [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [PATCH v3] spi: Add support SH Quad SPI driver   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v3] spi: Add support SH Quad SPI driver   Jagan Teki
• [U-Boot] [UBOOT]: Mcspi/qspi conflicting configs leading to build failure.   Sourav Poddar
  • [U-Boot] [UBOOT]: Mcspi/qspi conflicting configs leading to build failure.   Jagan Teki
• [U-Boot] : Discussion on Serial Flash Discoverable Parameters (SFDP): JESD216A   Jagan Teki
  • [U-Boot] : Discussion on Serial Flash Discoverable Parameters (SFDP): JESD216A   Jagan Teki
• [U-Boot] [PATCH v5 0/8] ARMv7: Add HYP mode switching support   Albert ARIBAUD
  • [U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver   Jagan Teki
  • [U-Boot] [PATCH v4] spi: Add support SH Quad SPI driver   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Jagan Teki
  • [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Vipin Kumar
    • [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Jagan Teki
    • [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Vipin Kumar
• [U-Boot] [PATCH v2 05/12] spi: add Faraday FTSPI010 SPI controller support   Jagan Teki
• [U-Boot] [PATCH 2/2 V3] spi: exynos: Support a delay after deactivate   Jagan Teki
  • [U-Boot] : SPI patches   Jagan Teki
  • [U-Boot] : SPI patches   Jagan Teki
  • [U-Boot] : SPI patches   Rajeshwari Birje
  • [U-Boot] : SPI patches   Jagan Teki
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
  • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
    • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Albert ARIBAUD
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Albert ARIBAUD
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Wolfgang Denk
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Wolfgang Denk
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Oliver Schinagl
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Tom Rini
      • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Wolfgang Denk
  • [U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long   Scott Wood
• [U-Boot] [U-Boot, u-boot, RFC, v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE   Albert ARIBAUD
  • [U-Boot] [U-Boot, u-boot, RFC, v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE   Tom Rini
• [U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS   Albert ARIBAUD
• [U-Boot] [PATCH v13 1/6] core support of arm64   Rob Herring
  • [U-Boot] [PATCH v13 1/6] core support of arm64   Rob Herring
• [U-Boot] [PATCH v13 1/6] core support of arm64   York Sun
  • [U-Boot] [PATCH v13 1/6] core support of arm64   Tom Rini
• [U-Boot] [PATCH v13 6/6] add weak entry definition   Rob Herring
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   Scott Wood
  • [U-Boot] [PATCH 2/4] arm64: Turn u-boot.bin back into an ELF file after relocate-rela   Scott Wood
  • [U-Boot] [PATCH 3/4] arm64: Non-manual relocation   Scott Wood
  • [U-Boot] [PATCH 3/4] arm64: Non-manual relocation   FengHua
  • [U-Boot] [PATCH 3/4] arm64: Non-manual relocation   Scott Wood
  • [U-Boot] [PATCH 4/4] arm64: Make checkarmreloc accept arm64 relocations   Scott Wood
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   FengHua
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   Albert ARIBAUD
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   Scott Wood
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   FengHua
  • [U-Boot] [PATCH 0/4] arm64: rela relocation   Albert ARIBAUD
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Scott Wood
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   FengHua
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Scott Wood
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Albert ARIBAUD
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Scott Wood
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Albert ARIBAUD
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Scott Wood
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Albert ARIBAUD
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   FengHua
  • [U-Boot] [PATCH 1/4] arm64: Add tool to statically apply RELA relocations   Scott Wood
  • [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Simon Glass
    • [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Masahiro Yamada
      • [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Simon Glass
      • [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Masahiro Yamada
      • [U-Boot] [PATCH v2 01/19] Makefile: prepare for using Kbuild-style Makefile   Simon Glass
• [U-Boot] [PATCH v2 17/19] sandbox: convert makefiles to Kbuild style   Simon Glass
  • [U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild   Simon Glass
    • [U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
      • [U-Boot] [PATCH v3 0/6] Second step towards Kbuild: Descend down like Kbuild   Simon Glass
  • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Timur Tabi
    • [U-Boot] [PATCH 7/9] net: tsec: Use portable types and accessors for BDs   Claudiu Manoil
      • [U-Boot] [PATCH 2/3][v5] mtd/ifc: Add support of 8K page size NAND flash   Prabhakar Kushwaha
      • [U-Boot] [PATCH 3/3][v5] board/c29xpcie: Add support of 8K page size NAND flash   Prabhakar Kushwaha
      • [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num()   Heiko Schocher
      • [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num()   Lukasz Majewski
      • [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num()   Heiko Schocher
      • [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num()   Lukasz Majewski
      • [U-Boot] [PATCH] i2c, core: optimze i2c_set_bus_num()   Heiko Schocher
• [U-Boot] [PATCH v6] spi: pl022_spi: Add support for ARM PL022 spi controller   Jagan Teki
  • [U-Boot] [PATCH 1/3][v5] mtd: move & update nand_ecclayout structure   Prabhakar Kushwaha
• [U-Boot] Lots of SPDX-License Identifer have a trailing space   Masahiro Yamada
  • [U-Boot] Lots of SPDX-License Identifer have a trailing space   Wolfgang Denk
    • [U-Boot] Lots of SPDX-License Identifer have a trailing space   Masahiro Yamada
  • [PATCH u-boot (sc) 1/3] get_ram_size incorrectly returns long, causing issues with more then 2 GiB of ram.   Oliver Schinagl
• [U-Boot] [PATCH] Fix problems in chip select selection in imx23, 28 spi code   Jagan Teki
  • [U-Boot] [PATCH] Add code for spi half duplex operation for enc28j60   Jagan Teki
    • [U-Boot] [PATCH v3 0/3] Consolidate CONFIG_SYS_HZ definition   Rob Herring
    • [U-Boot] [PATCH v3 3/3] config: remove platform CONFIG_SYS_HZ definition part 2/2   Rob Herring
    • [U-Boot] [PATCH v3 1/3] config: consolidate CONFIG_SYS_HZ definition   Rob Herring
    • [U-Boot] [PATCH v3 2/3] config: remove platform CONFIG_SYS_HZ definition part 1/2   Rob Herring
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Markus Niebel
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Wolfgang Denk
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Wolfgang Denk
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Wolfgang Denk
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Wolfgang Denk
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [PATCH] env_mmc: fix buffer allocation for armv7   Markus Niebel
    • [U-Boot] env_mmc: fix buffer allocation for armv7   Tom Rini
    • [U-Boot] [UBOOT][PATCHv4 0/6] Add TI qspi controller with memory mapped support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 1/6] omap5: add qspi support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 2/6] armv7: hw_data: change clock divider setting.   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support   Gerhard Sittig
    • [U-Boot] [UBOOT][PATCHv4 3/6] driver: mtd: spi: Add memory mapped read support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 4/6] spi: add TI QSPI driver   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation.   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation.   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation.   Sourav Poddar
    • [U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation.   Jagan Teki
    • [U-Boot] [UBOOT][PATCHv4 6/6] README: qspi usecase and testing documentation.   Sourav Poddar
    • [U-Boot] [PATCH] TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher address   Tom Rini
    • [U-Boot] [PATCH v2 0/9] Consolidate timer code   Rob Herring
    • [U-Boot] [PATCH v2 3/9] sh: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 5/9] ARM: mx25: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 6/9] ARM: vexpress: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 7/9] ARM: socfpga: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 8/9] ARM: tegra: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 9/9] ARM: versatile: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH v2 1/9] examples: enable gc-sections option   Rob Herring
    • [U-Boot] [PATCH v2 2/9] Introduce common timer functions   Rob Herring
    • [U-Boot] [PATCH v2 4/9] ARM: highbank: convert to common timer code   Rob Herring
    • [U-Boot] [PATCH 0/4] Coding Style cleanup   Wolfgang Denk
    • [U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space   Wolfgang Denk
    • [U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space   Michal Simek
    • [U-Boot] [PATCH 1/4] Coding Style cleanup: remove trailing white space   Wolfgang Denk
    • [U-Boot] [PATCH 1/4 V2] Coding Style cleanup: remove trailing white space   Wolfgang Denk
    • [U-Boot] [U-Boot, 1/4, V2] Coding Style cleanup: remove trailing white space   Tom Rini
    • [U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Wolfgang Denk
    • [U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Masahiro Yamada
    • [U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Tom Rini
    • [U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Simon Glass
    • [U-Boot] [PATCH 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Tom Rini
    • [U-Boot] [U-Boot, 2/4] Coding Style cleanup: replace leading SPACEs by TABs   Tom Rini
    • [U-Boot] [PATCH 4/4] Coding Style cleanup: drop some excessive empty lines   Wolfgang Denk
    • [U-Boot] [U-Boot, 4/4] Coding Style cleanup: drop some excessive empty lines   Tom Rini
    • [U-Boot] [PATCH 3/4] Coding Style cleanup: remove trailing empty lines   Wolfgang Denk
    • [U-Boot] [U-Boot, 3/4] Coding Style cleanup: remove trailing empty lines   Tom Rini
    • [U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x'   Tom Rini
    • [U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x'   Wolfgang Denk
    • [U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x'   Stephen Warren
    • [U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x'   Wolfgang Denk
    • [U-Boot] [PATCH] cmd_nvedit.c: setenv_hex must prefix hex with '0x'   Stephen Warren
    • [U-Boot] [PATCH] Fix number base handling of "load" command   Wolfgang Denk
    • [U-Boot] [PATCH] Fix number base handling of "load" command   Stephen Warren
    • [U-Boot] [PATCH] Fix number base handling of "load" command   Wolfgang Denk
    • [U-Boot] [PATCH V2] Fix number base handling of "load" command   Wolfgang Denk
    • [U-Boot] [PATCH] Fix number base handling of "load" command   Tom Rini
    • [U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices   Egbert Eich
    • [U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices   Piotr Wilczek
    • [U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices   Egbert Eich
    • [U-Boot] [Patch v3] cmd/gpt: Support gpt command for all devices   Piotr Wilczek
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Mateusz Zalega
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Troy Kisky
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Mateusz Zalega
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Troy Kisky
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Marek Vasut
    • [U-Boot] [PATCH v6] usb: new board-specific USB init interface   Marek Vasut
    • [U-Boot] [PATCH] config: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT is set   Egbert Eich
    • [U-Boot] [PATCH] config/sandbox: Add EFI and GPT support   Egbert Eich
• [U-Boot] DDR setting, p1020 registers read   Avinash Vijayvargia
  • [U-Boot] [PATCH] dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 build   Tom Rini
• [U-Boot] [PATCH v7 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Gupta, Pekon
• [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
  • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
    • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
      • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Tom Rini
      • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
      • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
      • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
      • [U-Boot] [PATCH v7 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
• [U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations   Eric Nelson
• [U-Boot] AES: Encryption of u-boot.img   Albert ARIBAUD
• [U-Boot] fs/fs.c - error handling needed?   Wolfgang Denk
  • [U-Boot] fs/fs.c - error handling needed?   Tom Rini
  • [U-Boot] fs/fs.c - error handling needed?   Wolfgang Denk
  • [U-Boot] fs/fs.c - error handling needed?   Tom Rini
  • [U-Boot] fs/fs.c - error handling needed?   Simon Glass
• [U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack   Wolfgang Denk
  • [U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack   Tom Rini
  • [U-Boot] [PATCH 02/11] env_mmc.c: Make the non-redundant env_relocate_spec use malloc not stack   Wolfgang Denk
• [U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32   Wolfgang Denk
  • [U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32   Tom Rini
  • [U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32   Wolfgang Denk
  • [U-Boot] [PATCH 01/11] fw_env.c: Increase max dev path to 32   Tom Rini
• [U-Boot] [PATCH] mmc: dw_mmc: change the callback function name.   Jaehoon Chung
  • [U-Boot] [PATCH] mmc: dw_mmc: change the callback function name.   Pantelis Antoniou
• [U-Boot] Hi, I am new to U-Boot, how do I get started?   Dimitar Tomov
  • [U-Boot] Hi, I am new to U-Boot, how do I get started?   Wolfgang Denk
• [U-Boot] Dynamically define which Kernel image to boot during SPL execution   0xbin4ry
  • [U-Boot] Dynamically define which Kernel image to boot during SPL execution   Wolfgang Denk
    • [U-Boot] Dynamically define which Kernel image to boot during SPL execution   bin4ry
      • [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary   Masahiro Yamada
      • [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary   Andre Przywara
      • [U-Boot] [PATCH] ARM: align MVBAR on 32 byte boundary   Masahiro Yamada
      • [U-Boot] [UBOOT][PATCHv5 0/6] Add TI qspi controller with memory mapped support.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 1/6] omap5: add qspi support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 2/6] armv7: hw_data: change clock divider setting.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 3/6] sf: Add memory mapped read support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 3/6] sf: Add memory mapped read support   Jagan Teki
      • [U-Boot] [UBOOT][PATCHv5 4/6] spi: add TI QSPI driver   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 4/6] spi: add TI QSPI driver   Jagan Teki
      • [U-Boot] [UBOOT][PATCHv5 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv5 6/6] README: qspi usecase and testing documentation.   Sourav Poddar
      • [U-Boot] [PATCH] Makefile: do not create a symbolic link to arch/${ARCH}/include/asm   Masahiro Yamada
• [U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single   Timo Herbrecher
  • [U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single   Jagan Teki
    • [U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single   Timo Herbrecher
      • [U-Boot] [PATCH v6] spi: add TI QSPI driver   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v6] spi: add TI QSPI driver   Sourav Poddar
      • [U-Boot] [PATCH] include: delete include/linux/config.h   Masahiro Yamada
      • [U-Boot] [PATCH V2 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition   Simon Glass
      • [U-Boot] [PATCH V2 1/6] exynos: Use common pmic_reg_update() definition   Lukasz Majewski
      • [U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus   Simon Glass
      • [U-Boot] [PATCH V2 2/6] power: Explicitly select pmic device's bus   Lukasz Majewski
      • [U-Boot] [PATCH V2 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 3/6] FDT: Exynos5420: Add compatible srings for PMIC   Simon Glass
      • [U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Simon Glass
      • [U-Boot] [PATCH V2 4/6] SMDK5420: S2MPS11: Adds the register settings for S2MPS11   Lukasz Majewski
      • [U-Boot] [PATCH V2 5/6] exynos: Add a common DT based PMIC driver initialization   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 5/6] exynos: Add a common DT based PMIC driver initialization   Simon Glass
      • [U-Boot] [PATCH V2 6/6] config: SMDK5420: Enable S2MPS11 pmic   Leela Krishna Amudala
      • [U-Boot] [PATCH V2 6/6] config: SMDK5420: Enable S2MPS11 pmic   Simon Glass
      • [U-Boot] [PATCH] ARM: virtualization: replace verbose license with SPDX identifier   Andre Przywara
      • [U-Boot] ARM: virtualization: replace verbose license with SPDX identifier   Tom Rini
      • [U-Boot] [PATCH 0/2] powerpc/t104xrdb: Add support for T1040RDB and T1042RDB_PI   Priyanka Jain
      • [U-Boot] [PATCH 1/2] powerpc/t104xrdb: Add T1040RDB board support   Priyanka Jain
      • [U-Boot] [PATCH 2/2] powerpc/t104xrdb: Add T1042RDB_PI board support   Priyanka Jain
      • [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 1/6] omap5: add qspi support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 2/6] armv7: hw_data: change clock divider setting.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 3/6] sf: Add memory mapped read support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 4/6] spi: add TI QSPI driver   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 6/6] README: qspi usecase and testing documentation.   Sourav Poddar
      • [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support.   Jagan Teki
      • [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support.   Sourav Poddar
  • [PATCH u-boot (sc) 2/3] Update all references to get_ram_size to unsigned long   Oliver Schinagl
    • [U-Boot] Please pull u-boot-ti/master   Tom Rini
      • [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
      • [U-Boot] [PATCH 1/3] sf: Minor cleanups   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH 2/3] sf: ramtron: Remove page_size print   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH 2/3] sf: ramtron: Remove page_size print   Jagan Teki
      • [U-Boot] [PATCH 3/3] doc: SPI: Update SPI status track   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH 3/3] doc: SPI: Update SPI status track   Jagan Teki
• [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Jagan Teki
  • [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
    • [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Jagan Teki
      • [U-Boot] [PATCHv2 5/8] drivers: mtd: spi: Modify read/write command for sfl256s flash.   Sourav Poddar
    • [U-Boot] Prevent null pointer dereference originating in cmd_pxe.c   Tom Rini
      • [U-Boot] Prevent null pointer dereference originating in cmd_pxe.c   Steven Falco
      • [U-Boot] Prevent null pointer dereference originating in cmd_pxe.c   Jagan Teki
      • [U-Boot] Prevent null pointer dereference originating in cmd_pxe.c   Fabio Estevam
      • [U-Boot] Prevent null pointer dereference originating in cmd_pxe.c   Tom Rini
      • [U-Boot] [PATCH] arm/km: fix i2c mux define for km_kirkwood_128m16 target   Holger Brunck
      • [U-Boot] [PATCH] arm/km: fix i2c mux define for km_kirkwood_128m16 target   Heiko Schocher
      • [U-Boot] [PATCH v2] sf: Minor cleanups   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v3] sf: Minor cleanups   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH v3] sf: Minor cleanups   Jagan Teki
      • [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
      • [U-Boot] [PATCH] da850evm.h: Always set CONFIG_CMD_SF, move to by CONFIG_SPI_FLASH   Tom Rini
      • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
      • [U-Boot] [PATCH 0/3] cm_t35 tune up   Nikita Kiryanov
      • [U-Boot] [PATCH V2 3/3] cm_t35: update lcd predefines   Nikita Kiryanov
      • [U-Boot] [PATCH 0/3] cm_t35 tune up   Nikita Kiryanov
      • [U-Boot] [PATCH 1/3] cm_t35: reduce default bootdelay to 3 seconds   Nikita Kiryanov
      • [U-Boot] [PATCH 2/3] cm_t35: turn on GPIO commands   Nikita Kiryanov
      • [U-Boot] [PATCH 3/3] cm_t35: update lcd predefines   Nikita Kiryanov
• [U-Boot] Bootdelay -1 for none autoboot does not work   Mario Albrecht
  • [U-Boot] Bootdelay -1 for none autoboot does not work   Eric Nelson
    • [U-Boot] Bootdelay -1 for none autoboot does not work   Robert P. J. Day
      • [U-Boot] Bootdelay -1 for none autoboot does not work   Mario Albrecht
      • [U-Boot] Bootdelay -1 for none autoboot does not work   Mario Albrecht
• [U-Boot] [PATCH] drivers/net/e1000: Introduce CONFIG_E1000_NO_NVM   Rojhalat Ibrahim
• [U-Boot] SPL initialization for DDR memory   Laszlo Papp
• [U-Boot] [PATCH v4] omap1510inn: arm925t: remove support   Albert ARIBAUD
• [U-Boot] [RESEND PATCH v7 1/2] socfpga: Adding System Manager driver   Albert ARIBAUD
• [U-Boot] [RESEND PATCH v6 2/2] socfpga: Adding pin mux handoff files   Albert ARIBAUD
  • [U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs   Tom Warren
  • [U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs   Stephen Warren
  • [U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs   Tom Warren
  • [U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs   Stephen Warren
  • [U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs   Tom Warren
  • [U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs   Stephen Warren
  • [U-Boot] [PATCH] Tegra114: Dalmore: Add voltage reg/PMIC init for various periphs   Tom Warren
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
  • [U-Boot] pci: Properly configure prefetchable memory region   Tom Rini
  • [U-Boot] power:pmic: prevent data abort for pmic bat command   Tom Rini
    • [U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m   Tom Warren
    • [U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m   Stephen Warren
    • [U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m   Tom Warren
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Tom Warren
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Jagan Teki
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Tom Warren
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Jagan Teki
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Stephen Warren
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Stephen Warren
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Jagan Teki
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Jagan Teki
    • [U-Boot] [PATCH] Tegra: T1x4: SPI: Use a common name (t1x4) for SPI driver   Stephen Warren
    • [U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files   Tom Warren
    • [U-Boot] [PATCH 2/8] Tegra124: Add changes to common arch-tegra header files   Tom Warren
    • [U-Boot] [PATCH 2/8] Tegra124: Add changes to common arch-tegra header files   Thierry Reding
    • [U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files   Tom Warren
    • [U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files   Thierry Reding
    • [U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files   Stephen Warren
    • [U-Boot] [PATCH 3/8] Tegra124: Add SPL/AVP (arm720t) cpu files   Stephen Warren
    • [U-Boot] [PATCH 4/8] Tegra124: Add CPU (armv7) files   Tom Warren
    • [U-Boot] [PATCH 5/8] Tegra124: Add common CPU (shared) files   Tom Warren
    • [U-Boot] [PATCH 5/8] Tegra124: Add common CPU (shared) files   Stephen Warren
    • [U-Boot] [PATCH 6/8] Tegra124: Add generic T124 build support   Tom Warren
    • [U-Boot] [PATCH 6/8] Tegra124: Add generic T124 build support   Stephen Warren
    • [U-Boot] [PATCH 7/8] Tegra124: Venice2: fdt: Add device-tree files   Tom Warren
    • [U-Boot] [PATCH 7/8] Tegra124: Venice2: fdt: Add device-tree files   Stephen Warren
    • [U-Boot] [PATCH 8/8] Tegra124: Add Venice2 (T124) build   Tom Warren
    • [U-Boot] [PATCH 8/8] Tegra124: Add Venice2 (T124) build   Stephen Warren
    • [U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files   Thierry Reding
    • [U-Boot] [PATCH 1/8] Tegra124: Add arch-tegra124 include/header files   Stephen Warren
    • [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver   Suriyan Ramasami
    • [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver   Simon Glass
    • [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver   Marek Vasut
    • [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver   Joe Hershberger
    • [U-Boot] [PATCH V2]Powerpc/P1022DS: Enable the DIU for P1022DS board.   Jason Jin
  • [U-Boot] [PATCH] Enable the DIU for P1022DS board.   Jin Zhengxiong-R64188
    • [U-Boot] [PATCH] env: dataflash: fix env_init issue   Bo Shen
    • [U-Boot] env: dataflash: fix env_init issue   Tom Rini
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Rajeshwari S Shinde
    • [U-Boot] [PATCH 1/4] exynos: Export timer_get_us() to get microsecond timer   Rajeshwari S Shinde
    • [U-Boot] [PATCH 2/4] spi: exynos: Support a delay after deactivate   Rajeshwari S Shinde
    • [U-Boot] [PATCH 3/4] spi: exynos: Minimise access to SPI FIFO level   Rajeshwari S Shinde
    • [U-Boot] [PATCH 4/4] spi: exynos: Support word transfers   Rajeshwari S Shinde
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Jagan Teki
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Rajeshwari Birje
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Jagan Teki
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Rajeshwari Birje
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Jagan Teki
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Rajeshwari Birje
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Jagan Teki
    • [U-Boot] [PATCH 0/4] spi: exynos: Improve performance   Jagan Teki
• [U-Boot] [PATCH 00/10 V4] EXYNOS5420: Add SMDK5420 board support   Rajeshwari Birje
• [U-Boot] [PATCH] env: fix the env export varname   Pierre Aubert
  • [U-Boot] [RFC PATCH v2 0/2] ARMV7: OMAP4: Add support for twl6032   Oleg Kosheliev
  • [U-Boot] [RFC PATCH v2 1/2] ARMV7: OMAP4: Add struct for twl603x data   Oleg Kosheliev
  • [U-Boot] [RFC PATCH v2 2/2] ARMV7: OMAP4: Add twl6032 support   Oleg Kosheliev
  • [U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Tom Rini
  • [U-Boot] [PATCH] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Jagan Teki
  • [U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function   Rajeshwari S Shinde
  • [U-Boot] [PATCH V3] exynos: spl: Add a custom spi copy function   Rajeshwari Birje
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Tom Rini
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Robert P. J. Day
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Tom Rini
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Tom Rini
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Robert P. J. Day
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Robert Nelson
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Robert P. J. Day
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Tom Rini
  • [U-Boot] [PATCH] Revert "am335x_evm.h: If mmcdev and bootpart switch to mmcdev 1, so should mmcroot."   Robert P. J. Day
  • [U-Boot] [PATCH 0/5] ARM: Exynos5250: consolidate configuration files   Simon Glass
• [U-Boot] [PATCH v7 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Scott Wood
  • [U-Boot] [PATCH 01/10 V4] EXYNOS5: Create a common board file   Simon Glass
    • [U-Boot] [PATCH 02/10 V4] Exynos5420: Add base addresses for 5420   Simon Glass
• [U-Boot] [PATCH v7 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Scott Wood
• [U-Boot] [PATCH 05/10 V4] Exynos5420: Add support for 5420 in pinmux and gpio   Simon Glass
• [U-Boot] [PATCH 06/10 V4] Exynos5420: Add base patch for SMDK5420   Simon Glass
  • [U-Boot] [PATCH 06/10 V4] Exynos5420: Add base patch for SMDK5420   Rajeshwari Birje
• [U-Boot] [PATCH 07/10 V4] DTS: Add dts support for SMDK5420   Simon Glass
  • [U-Boot] [PATCH 08/10 V4] Config: Add initial config for SMDK5420   Simon Glass
  • [U-Boot] [PATCH 09/10 V4] SPL: EXYNOS: Prepare for variable size SPL support   Simon Glass
    • [U-Boot] [PATCH 09/10 V4] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari Birje
  • [U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC   Simon Glass
• [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Jeroen Hofstee
  • [U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired   Masahiro Yamada
    • [U-Boot] [PATCH] SPDX: document dual license notation   Wolfgang Denk
    • [U-Boot] [PATCH] SPDX: document dual license notation   Stephen Warren
    • [U-Boot] [PATCH] SPDX: document dual license notation   Wolfgang Denk
    • [U-Boot] [PATCH] SPDX: document dual license notation   Stephen Warren
    • [U-Boot] SPDX: document dual license notation   Tom Rini
    • [U-Boot] [PATCH] arm: Tegra: T114: Use common tegra1x4- includes in arch-tegra   Tom Warren
    • [U-Boot] [PATCH] arm: Tegra: T114: Use common tegra1x4- includes in arch-tegra   Stephen Warren
    • [U-Boot] [PATCH] arm: Tegra: Use arch-specific pmc.h where needed, else use common pmc.h   Tom Warren
• [U-Boot] [PATCH v2 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Scott Wood
• [U-Boot] [PATCH v2 1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width   Scott Wood
• [U-Boot] [PATCH v2 2/4] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width   Scott Wood
• [U-Boot] Difference between CONFIG_SYS_TEXT_BASE and _start   Djoker
  • [U-Boot] [PATCH] spi: Add support SH Quad SPI driver   Nobuhiro Iwamatsu
• [U-Boot] problems porting to 2013.x   Chris Ruehl
  • [U-Boot] problems porting to 2013.x   Chris Ruehl
    • [U-Boot] problems porting to 2013.x   Chris Ruehl
  • [U-Boot] problems porting to 2013.x   Fabio Estevam
    • [U-Boot] problems porting to 2013.x   Chris Ruehl
      • [U-Boot] [PATCH 0/3] Add support for SPI based DataImage LCD panel   Nikita Kiryanov
      • [U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths   Nikita Kiryanov
      • [U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths   Gerhard Sittig
      • [U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths   Igor Grinberg
      • [U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths   Nikita Kiryanov
      • [U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support   Nikita Kiryanov
      • [U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support   Anatolij Gustschin
      • [U-Boot] [PATCH 2/3] lcd: add DataImage SCF0403x LCD panel support   Igor Grinberg
      • [U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver   Nikita Kiryanov
      • [U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver   Anatolij Gustschin
      • [U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver   Igor Grinberg
  • [U-Boot] How/Where does "_start" get assigned a value ?   djoker
    • [U-Boot] How/Where does "_start" get assigned a value ?   Arvid Brodin
      • [U-Boot] How/Where does "_start" get assigned a value ?   Djoker
      • [U-Boot] How/Where does "_start" get assigned a value ?   Albert ARIBAUD
      • [U-Boot] How/Where does "_start" get assigned a value ?   djoker
    • [U-Boot] How/Where does "_start" get assigned a value ?   Gerhard Sittig
      • [U-Boot] How/Where does "_start" get assigned a value ?   Djoker
      • [U-Boot] How/Where does "_start" get assigned a value ?   Gerhard Sittig
• [U-Boot] U-Boot Regression Testing   Curt Brune
  • [U-Boot] U-Boot Regression Testing   Simon Glass
  • [U-Boot] U-Boot Regression Testing   Wolfgang Denk
    • [U-Boot] U-Boot Regression Testing   Curt Brune
  • [U-Boot] U-Boot Regression Testing   Lukasz Majewski
• [U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb   Andrew Murray
  • [U-Boot] [PATCH v2] usb: Prevent using reserved registers on DM36x usb   Tom Rini
    • [U-Boot] TI xHCI updates   Dan Murphy
    • [U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location   Dan Murphy
    • [U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location   Marek Vasut
    • [U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location   Dan Murphy
    • [U-Boot] [PATCH 1/6] usb: omap: Move the xhci-omap header file to common location   Marek Vasut
    • [U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Dan Murphy
    • [U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Marek Vasut
    • [U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Dan Murphy
    • [U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Marek Vasut
    • [U-Boot] [PATCH 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Dan Murphy
    • [U-Boot] [PATCH 4/6] usb: dra7xx: Add support for dra7xx xhci USB host   Dan Murphy
    • [U-Boot] [PATCH 5/6] usb: am437x: Add support for am437x xhci USB host   Dan Murphy
    • [U-Boot] [PATCH 5/6] usb: am437x: Add support for am437x xhci USB host   Marek Vasut
    • [U-Boot] TI xHCI updates   Dan Murphy
    • [U-Boot] TI xHCI updates   Jagan Teki
    • [U-Boot] TI xHCI updates   Dan Murphy
    • [U-Boot] TI xHCI updates   Marek Vasut
    • [U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init   Dan Murphy
    • [U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init   Marek Vasut
    • [U-Boot] [PATCH 2/6] usb: omap5: Change the board_usb_init api to board_xhci_usb_init   Dan Murphy
    • [U-Boot] [PATCH 6/6] ARM: omap5-evm: Move MAC creation to misc_init   Dan Murphy
    • [U-Boot] [PATCH] omap5_common: Re-work mmc boot to try SD and eMMC, correct root device   Tom Rini
    • [U-Boot] [PATCH] omap5_common: Re-work mmc boot to try SD and eMMC, correct root device   Tom Rini
• [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] Pull request: nand flash   Tom Rini
  • [U-Boot] Pull request: nand flash   Albert ARIBAUD
  • [U-Boot] Pull request: nand flash   Tom Rini
  • [U-Boot] Pull request: nand flash   Albert ARIBAUD
  • [U-Boot] Pull request: nand flash   Albert ARIBAUD
  • [U-Boot] Pull request: nand flash   Tom Rini
  • [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] Pull request: nand flash   Tom Rini
  • [U-Boot] Pull request: nand flash   Albert ARIBAUD
  • [U-Boot] Pull request: nand flash   Albert ARIBAUD
  • [U-Boot] Pull request: nand flash   Otavio Salvador
  • [U-Boot] Pull request: nand flash   Tom Rini
    • [U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda   Dan Murphy
    • [U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda   Tom Rini
    • [U-Boot] [PATCH] ARM: omap4-panda: Add MAC address creation for panda   Dan Murphy
    • [U-Boot] [PATCH] ARM: omap4: Update sdram setting for panda rev A6   Dan Murphy
    • [U-Boot] ARM: omap4: Update sdram setting for panda rev A6   Tom Rini
• [U-Boot] Got u-boot-2012.10 running on at91sam9200 - but why does it work?   Arvid Brodin
  • [U-Boot] Got u-boot-2012.10 running on at91sam9200 - but why does it work?   Jens Scharsig
    • [U-Boot] Got u-boot-2012.10 running on at91rm9200 - but why does it work?   Arvid Brodin
    • [U-Boot] Got u-boot-2012.10 running on at91rm9200 - but why does it work?   Jens Scharsig
    • [U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt   Eric Nelson
    • [U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt   Stefano Babic
    • [U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt   Otavio Salvador
    • [U-Boot] [PATCH] i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt   Stefano Babic
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Stephen Warren
    • [U-Boot] [PATCH 2/2] buildman: make board selector argument a regex   Stephen Warren
    • [U-Boot] [PATCH 2/2] buildman: make board selector argument a regex   Simon Glass
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Simon Glass
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Stephen Warren
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Simon Glass
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Stephen Warren
    • [U-Boot] [PATCH 1/2] buildman: don't fail --list-toolchains when toolchains fail   Simon Glass
    • [U-Boot] [PATCH 1/3] cmd_ubifs: normalize 'file not found' errors   Luka Perkov
    • [U-Boot] [PATCH 2/3] cmd_reiser: normalize 'file not found' errors   Luka Perkov
    • [U-Boot] [PATCH 3/3] cmd_zfs: normalize 'file not found' errors   Luka Perkov
• [U-Boot] [Patch v1 1/1] usb:smsx95xx LED activity for USB net driver   Marek Vasut
  • [U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls   Suriyan Ramasami
  • [U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls   Wolfgang Denk
  • [U-Boot] [Patch v1 1/1] jffs2: change U_BOOT_CMD ls to fsls   Suriyan Ramasami
  • [U-Boot] FW: [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang-B45475
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Albert ARIBAUD
• [U-Boot] FW: [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space.   Tom Rini
  • [U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support   Bo Shen
  • [U-Boot] [PATCH 2/3] sf: change indentation in <sf_probe.c>   Bo Shen
  • [U-Boot] [PATCH 2/3] sf: change indentation in <sf_probe.c>   Jagan Teki
  • [U-Boot] [PATCH 3/3] sf: using the same license header format   Bo Shen
  • [U-Boot] [PATCH 3/3] sf: using the same license header format   Jagan Teki
  • [U-Boot] [PATCH 3/3] sf: using the same license header format   Tom Rini
  • [U-Boot] [PATCH 3/3] sf: using the same license header format   Jagan Teki
  • [U-Boot] [PATCH 3/3] sf: using the same license header format   Wolfgang Denk
  • [U-Boot] [PATCH 00/10 V5] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
  • [U-Boot] [PATCH 05/10 V5] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
  • [U-Boot] [PATCH 01/10 V5] EXYNOS5: Create a common board file   Rajeshwari S Shinde
  • [U-Boot] [PATCH 01/10 V5] EXYNOS5: Create a common board file   Simon Glass
  • [U-Boot] [PATCH 02/10 V5] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 03/10 V5] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 04/10 V5] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 06/10 V5] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 06/10 V5] Exynos5420: Add base patch for SMDK5420   Simon Glass
  • [U-Boot] [PATCH 07/10 V5] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 08/10 V5] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 09/10 V5] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
  • [U-Boot] [PATCH 10/10 V5] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari S Shinde
• [U-Boot] SPDX License IDs - moving forward   Wolfgang Denk
  • [U-Boot] SPDX License IDs - moving forward   Mats Kärrman
  • [U-Boot] SPDX License IDs - moving forward   Masahiro Yamada
  • [U-Boot] SPDX License IDs - moving forward   Meier, Roger
    • [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Pekon Gupta
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Pekon Gupta
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Scott Wood
    • [U-Boot] [PATCH v8 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform   Gupta, Pekon
    • [U-Boot] [PATCH v8 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes   Pekon Gupta
    • [U-Boot] [PATCH v8 3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes   Pekon Gupta
    • [U-Boot] [PATCH v8 4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes   Pekon Gupta
    • [U-Boot] [PATCH v8 5/5] board/ti/am335x/README: update for NAND boot   Pekon Gupta
    • [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Tom Rini
    • [U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Matthias Fuchs
    • [U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   Ramneek Mehresh
    • [U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   York Sun
    • [U-Boot] [PATCH 1/2][v2]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   York Sun
    • [U-Boot] [U-Boot, v2] usb: Prevent using reserved registers on DM36x usb   Tom Rini
      • [U-Boot] [Patch v2] ARM: omap4-panda: Add MAC address creation for panda   Dan Murphy
      • [U-Boot] [U-Boot, v2] ARM: omap4-panda: Add MAC address creation for panda   Tom Rini
      • [U-Boot] [PATCH] am335x_evm.h: Make 'am335x_boneblack' use redundant environment   Tom Rini
      • [U-Boot] am335x_evm.h: Make 'am335x_boneblack' use redundant environment   Tom Rini
      • [U-Boot] [PATCH] cmd_sandbox.c: Update for do_(load|save) not taking a number base   Tom Rini
      • [U-Boot] [PATCH] cmd_sandbox.c: Update for do_(load|save) not taking a number base   Tom Rini
• [U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ   Stefano Babic
• [U-Boot] [PATCH v3] ARM: mxs: tools: Use mkimage for BootStream generation   Stefano Babic
• [U-Boot] [PATCH] udoo: Add initial support for mx6q udoo board   Stefano Babic
• [U-Boot] [PATCH] ARM: mxs: Add PPC-AG BG0900 board   Stefano Babic
• [U-Boot] [PATCH] ARM: mxs: Setup stack in JTAG mode   Stefano Babic
  • [U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations   Fabio Estevam
    • [U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations   Shawn Guo
    • [U-Boot] [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations   Eric Nelson
    • [U-Boot] [PATCH V2] buildman: make board selector argument a regex   Stephen Warren
    • [U-Boot] [PATCH V2] buildman: make board selector argument a regex   Simon Glass
    • [U-Boot] [PATCH 1/2] sf_ops: Unify bank_sel calculation code   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 2/2] sf: Minor cleanups.   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 1/2] sf: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 2/2] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH 2/2] spi: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Tom Rini
• [U-Boot] Please pull u-boot-x86 buildman   Simon Glass
  • [U-Boot] Please pull u-boot-x86 buildman   Tom Rini
  • [U-Boot] [PATCH V6 00/10] Make mv_udc work for i.mx6   Troy Kisky
  • [U-Boot] [PATCH V6 00/10] Make mv_udc work for i.mx6   Marek Vasut
  • [U-Boot] [PATCH V6 01/10] usb: rename board_usb_init_type to usb_init_type   Troy Kisky
  • [U-Boot] [PATCH V6 02/10] usb: add enum usb_init_type parameter to usb_lowlevel_init   Troy Kisky
  • [U-Boot] [PATCH V6 03/10] usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.   Troy Kisky
  • [U-Boot] [PATCH V6 03/10] usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.   Marek Vasut
  • [U-Boot] [PATCH V6 04/10] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT   Troy Kisky
  • [U-Boot] [PATCH V6 05/10] usb: ehci-mx6: add support for otg port   Troy Kisky
  • [U-Boot] [PATCH V6 06/10] usb: gadget: mv_udc: fix full speed connections   Troy Kisky
  • [U-Boot] [PATCH V6 07/10] usb: gadget: mv_udc: optimize bounce   Troy Kisky
  • [U-Boot] [PATCH V6 08/10] usb: gadget: mv_udc: optimize ep_enable   Troy Kisky
  • [U-Boot] [PATCH V6 09/10] usb: gadget: mv_udc: split mv_udc.h file   Troy Kisky
  • [U-Boot] [PATCH V6 10/10] usb: udc: add udc.h include file   Troy Kisky
• [U-Boot] [PATCH v3] PCIe:change the method to get the address of a requested capability in configuration space.   York Sun
• [U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support   Bo Shen
  • [U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support   Bo Shen
    • [U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support   Jagan Teki
    • [U-Boot] [PATCH 1/3] sf: add missing Atmel at25df321 spi flash support   Bo Shen
    • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
    • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Marek Vasut
    • [U-Boot] [PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
  • [U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP   Ajay kumar
    • [U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP   Ajay kumar
    • [U-Boot] [PATCH v4] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang
    • [U-Boot] [PATCH 1/2] README: I2C: Fix indent   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/2] i2c: sh_i2c: Avoid using I2C prior to relocation   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/2] i2c: sh_i2c: Avoid using I2C prior to relocation   Heiko Schocher
    • [U-Boot] [PATCH 1/2] README: I2C: Fix indent   Heiko Schocher
• [U-Boot] omap3 usb boot   Michael Trimarchi
  • [U-Boot] omap3 usb boot   Tom Rini
• [U-Boot] sandbox is broken   Masahiro Yamada
  • [U-Boot] sandbox is broken   Tom Rini
• [U-Boot] Suggestion for building all boards   Masahiro Yamada
  • [U-Boot] Suggestion for building all boards   Stefan Roese
  • [U-Boot] Suggestion for building all boards   Simon Glass
    • [U-Boot] Suggestion for building all boards   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Piotr Wilczek
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Piotr Wilczek
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Måns Rullgård
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Piotr Wilczek
      • [U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition   Albert ARIBAUD
      • [U-Boot] [PATCH] fs:fat: fix set file name function   Piotr Wilczek
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-arm/master   Tom Rini
    • [U-Boot] [RFC] [PATCH] [NEXT] arm: keep all sections in ELF file   Albert ARIBAUD
    • [U-Boot] [RFC] [PATCH] [NEXT] arm: keep all sections in ELF file   Daniel Schwierzeck
    • [U-Boot] [PATCH v4] powerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pb   Shengzhou Liu
    • [U-Boot] [PATCH v2 0/6] TI xHCI Updated patchset   Dan Murphy
    • [U-Boot] [PATCH v2 4/6] usb: dra7xx: Add support for dra7xx xhci USB host   Dan Murphy
    • [U-Boot] [PATCH v2 4/6] usb: dra7xx: Add support for dra7xx xhci USB host   Marek Vasut
    • [U-Boot] [PATCH v2 0/6] TI xHCI Updated patchset   Marek Vasut
    • [U-Boot] [PATCH v2 1/6] usb: omap: Move the xhci-omap header file to common location   Dan Murphy
    • [U-Boot] [PATCH v2 2/6] usb: omap5: Update the board_usb_init api   Dan Murphy
    • [U-Boot] [PATCH v2 3/6] usb: omap: Move the usb phy code to the usb/phy directory   Dan Murphy
    • [U-Boot] [PATCH v2 5/6] usb: am437x: Add support for am437x xhci USB host   Dan Murphy
    • [U-Boot] [PATCH v2 6/6] ARM: omap5-evm: Move MAC creation to misc_init   Dan Murphy
• [U-Boot] SPDX-License-Identifier on new files   D Rambo
  • [U-Boot] SPDX-License-Identifier on new files   Tom Rini
  • [U-Boot] SPDX-License-Identifier on new files   Wolfgang Denk
• [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
  • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
    • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Scott Wood
      • [U-Boot] powerpc/mpc85xx: Increase image size   York Sun
      • [U-Boot] powerpc/mpc85xx: Increase image size   Kushwaha Prabhakar-B32579
      • [U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable   Tom Rini
      • [U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable   Tom Rini
      • [U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable   Albert ARIBAUD
      • [U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable   Tom Rini
      • [U-Boot] [PATCH] Makefile: Introduce ARCH_PLATFORM_LIBGCC variable   Albert ARIBAUD
      • [U-Boot] [PATCH v5] PCIe:change the method to get the address of a requested capability in configuration space.   Zhao Qiang
• [U-Boot] Question about dfu flash rootfs image   Bo Shen
  • [U-Boot] Question about dfu flash rootfs image   Heiko Schocher
    • [U-Boot] Question about dfu flash rootfs image   Lukasz Majewski
    • [U-Boot] Question about dfu flash rootfs image   Bo Shen
      • [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Bo Shen
      • [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Lukasz Majewski
      • [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Marek Vasut
      • [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Bo Shen
      • [U-Boot] [RFC PATCH] usb: dfu: make nand upload working   Bo Shen
      • [U-Boot] [PATCH v14 00/10] arm64 patch   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 01/10] fdt_support: 64bit initrd start address support   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 02/10] cmd_pxe: remove compiling warnings   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 03/10] add weak entry definition   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations   Scott Wood
      • [U-Boot] [PATCH v14 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 06/10] arm64: Make checkarmreloc accept arm64 relocations   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 07/10] arm64: core support   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 08/10] arm64: generic board support   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 09/10] arm64: board support of vexpress_aemv8a   fenghua at phytium.com.cn
      • [U-Boot] [PATCH v14 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm   fenghua at phytium.com.cn
• [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state   TigerLiu at viatech.com.cn
  • [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state   Albert ARIBAUD
    • [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state   TigerLiu at viatech.com.cn
      • [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state   Albert ARIBAUD
      • [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switchto non-secure state   TigerLiu at viatech.com.cn
      • [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Haijun Zhang
      • [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Zhang Haijun
      • [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Stefano Babic
      • [U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting   Zhang Haijun
      • [U-Boot] [PATCH 0/3] Improved NAND support for mx28evk   Otavio Salvador
      • [U-Boot] [PATCH 1/3] mx28evk: Use 512k for fdt partition to align it   Otavio Salvador
      • [U-Boot] [PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
      • [U-Boot] [PATCH 3/3] mx28evk: Extend environment to easy write of NAND system   Otavio Salvador
      • [U-Boot] [PATCH] Net: FEC: Fix huge memory leak   Marek Vasut
      • [U-Boot] [PATCH] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v1] patman: add Series-commit-notes tag and section   Albert ARIBAUD
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Benoît Thébaudeau
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE)   Albert ARIBAUD
      • [U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE)   Benoît Thébaudeau
      • [U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE)   Albert ARIBAUD
      • [U-Boot] Handling hangs (was: [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE)   Albert ARIBAUD
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Benoît Thébaudeau
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE   Albert ARIBAUD
      • [U-Boot] [PATCH 1/2] Introduced btrfs file-system with btrload command   Adnan Ali
      • [U-Boot] [PATCH 2/2] Enable btrfs support in mx53loco config   Adnan Ali
      • [U-Boot] [PATCH] .gitignore: add auto-generated /include/[s|t]pl-autoconf.mk   Daniel Schwierzeck
      • [U-Boot] .gitignore: add auto-generated /include/[s|t]pl-autoconf.mk   Tom Rini
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Marek Vasut
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Marek Vasut
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Hector Palacios
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Hector Palacios
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Stefano Babic
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Marek Vasut
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Stefano Babic
      • [U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init   Marek Vasut
      • [U-Boot] [PATCH v14 09/10] arm64: board support of vexpress_aemv8a   fenghua at phytium.com.cn
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Luka Perkov
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Fabio Estevam
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Luka Perkov
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Marek Vasut
• [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Heiko Schocher
  • [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Jens Scharsig
• [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Heiko Schocher
  • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Michael Burr
    • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Heiko Schocher
    • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Michal Simek
    • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Heiko Schocher
• [U-Boot] [PATCH] RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework   Heiko Schocher
  • [U-Boot] [PATCH v2 0/5] spi: cleanup set for v2013.10 rel   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 0/5] spi: cleanup set for v2013.10 rel   Jagan Teki
  • [U-Boot] [PATCH v2 1/5] sf_ops: Unify bank_sel calculation code   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 2/5] sf: Minor cleanups.   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 3/5] sf: Add GPL-2.0+ SPDX-License-Identifier for missing ones   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 4/5] spi: Add GPL-2.0+ SPDX-License-Identifier for missing files   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH v2 5/5] sf: probe: Add missing Atmel at25df321 flash   Jagannadha Sutradharudu Teki
  • [U-Boot] [PATCH] Fix: nommu I2C adapter relocation error   Jens Scharsig (BuS Elektronik)
  • [U-Boot] [PATCH] Fix: nommu I2C adapter relocation error   Heiko Schocher
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Chin Liang See
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Albert ARIBAUD
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Chin Liang See
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Albert ARIBAUD
  • [U-Boot] [PATCH v4] socfpga: Adding Freeze Controller driver   Chin Liang See
  • [U-Boot] [ANN] Release slightly delayed   Tom Rini
    • [U-Boot] [ANN] Release slightly delayed   Albert ARIBAUD
• [U-Boot] fatls shows duplicated entries with long and short names   Hector Palacios
  • [U-Boot] fatls shows duplicated entries with long and short names   Marek Vasut
    • [U-Boot] fatls shows duplicated entries with long and short names   Tom Rini
      • [U-Boot] fatls shows duplicated entries with long and short names   Jagan Teki
      • [U-Boot] fatls shows duplicated entries with long and short names   Hector Palacios
      • [U-Boot] fatls shows duplicated entries with long and short names   Jagan Teki
      • [U-Boot] fatls shows duplicated entries with long and short names   Albert ARIBAUD
  • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Michael Burr
    • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Heiko Schocher
      • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Jagan Teki
      • [U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model   Michael Burr
      • [U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target   Mateusz Zalega
      • [U-Boot] [PATCH v4 2/2] arm:goni:dfu Add support for DFU at GONI target   Mateusz Zalega
      • [U-Boot] [PATCH v4 2/2] arm:goni:dfu Add support for DFU at GONI target   Przemyslaw Marczak
      • [U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target   Przemyslaw Marczak
• [U-Boot] [RFC] i2c_reloc_fixup fails on m68k   Mike Frysinger
  • [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed   oller
    • [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed   Jagan Teki
    • [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed   Oleg Dzhimiev
    • [U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed   Michal Simek
  • [U-Boot] u-boot-xlnx/master-next: build error   Oleg Dzhimiev
    • [U-Boot] u-boot-xlnx/master-next: build error   Albert ARIBAUD
      • [U-Boot] u-boot-xlnx/master-next: build error   Michal Simek
      • [U-Boot] u-boot-xlnx/master-next: build error   Oleg Dzhimiev
    • [U-Boot] pmic: max77686: fix the wrong offset   Tom Rini
• [U-Boot] [PATCH V2 0/2] add sdhci generic framework   Vadim Bendebury
  • [U-Boot] [PATCH V2 0/2] add sdhci generic framework   Lei Wen
    • [U-Boot] [PATCH V2 0/2] add sdhci generic framework   Vadim Bendebury
• [U-Boot] [PATCH] serial: mxs_auart: Staticize local functions   Axel Lin
  • [U-Boot] [PATCH] serial: mxs_auart: Staticize local functions   Marek Vasut
    • [U-Boot] [PATCH] serial: mxs_auart: Staticize local functions   Axel Lin
    • [U-Boot] [RESEND PATCH v14 00/10] arm64 pat   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 01/10] fdt_support: 64bit initrd start address support   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 02/10] cmd_pxe: remove compiling warnings   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 03/10] add weak entry definition   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 04/10] arm64: Add tool to statically apply RELA relocations   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 06/10] arm64: Make checkarmreloc accept arm64 relocations   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 07/10] arm64: core support   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 08/10] arm64: generic board support   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 09/10] arm64: board support of vexpress_aemv8a   fenghua at phytium.com.cn
    • [U-Boot] [RESEND PATCH v14 10/10] arm64: MAKEALL, filter armv8 boards from LIST_arm   fenghua at phytium.com.cn
• [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly   Heiko Schocher
  • [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly   Lukasz Majewski
    • [U-Boot] [PATCH 1/3 v3] exynos: i2c: Fix i2c driver to handle NACKs properly   Naveen Krishna Chatradhi
    • [U-Boot] [PATCH 2/3 v3] exynos: i2c: Change FDT bus setup code to enumerate ports correctly   Naveen Krishna Chatradhi
    • [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Chatradhi
    • [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
    • [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines   Ajay kumar
  • [U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420   Ajay kumar
• [U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Ajay kumar
  • [U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu   Ajay kumar
  • [U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver   Ajay kumar
  • [U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP   Ajay kumar
    • [U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k   Masahiro Yamada
    • [U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k   Albert ARIBAUD
    • [U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k   Masahiro Yamada
• [U-Boot] [U-boot] "-mno-unaligned-access" question   Albert ARIBAUD
• [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
  • [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Ch
• [U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC   Jaehoon Chung
  • [U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari Birje
• [U-Boot] pxe incompatibility with x86   Ian Campbell
  • [U-Boot] pxe incompatibility with x86   rob.herring at calxeda.com
    • [U-Boot] pxe incompatibility with x86   Ian Campbell
      • [U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test   Masahiro Yamada
      • [U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test   Albert ARIBAUD
      • [U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test   Masahiro Yamada
      • [U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test   Albert ARIBAUD
      • [U-Boot] [PATCH 2/3 v4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly   Naveen Krishna Chatradhi
      • [U-Boot] [U-Boot, 2/3, v4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly   Heiko Schocher
      • [U-Boot] [PATCH 3/3 v7] i2c: s3c24xx: add hsi2c controller support   Naveen Krishna Chatradhi
      • [U-Boot] [U-Boot, 3/3, v7] i2c: s3c24xx: add hsi2c controller support   Heiko Schocher
  • [U-Boot] [PATCH] buildman: Use env to pick the python from $PATH   Jagan Teki
    • [U-Boot] [PATCH v4] config.mk: fix -fstack-usage support test   Masahiro Yamada
    • [U-Boot] buildman: Use env to pick the python from $PATH   Tom Rini
• [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Detlev Zundel
  • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Detlev Zundel
    • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Detlev Zundel
  • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Marek Vasut
    • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Albert ARIBAUD
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Marek Vasut
    • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Stefano Babic
    • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Wolfgang Denk
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Albert ARIBAUD
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Michael Trimarchi
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Robert P. J. Day
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Michael Trimarchi
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Albert ARIBAUD
      • [U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013   Otavio Salvador
• [U-Boot] [PATCH v2 0/2] I2C: Zynq   Michael Burr
  • [U-Boot] [PATCH v2 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
    • [U-Boot] [PATCH v2 2/2] I2C:Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH 2/4] cmd_mtdparts: use 64 bits for flash size, partition size & offset   York Sun
• [U-Boot] [PATCH v3 0/2] I2C: Zynq   Michael Burr
  • [U-Boot] [PATCH v3 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
• [U-Boot] [PATCH v3 2/2] I2C: Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Martin Fuzzey
  • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Jagan Teki
    • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Albert ARIBAUD
      • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Jagan Teki
      • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Albert ARIBAUD
      • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Jagan Teki
      • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Martin Fuzzey
      • [U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers.   Albert ARIBAUD
• [U-Boot] [PATCH v4 0/2] I2C: Zynq   Michael Burr
  • [U-Boot] [PATCH v4 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
• [U-Boot] [PATCH v4 2/2] I2C: Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH v2 11/11] mpc85xx: introduce the kmp204x reference design support   York Sun
• [U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support   York Sun
  • [U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support   Valentin Longchamp
    • [U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support   York Sun
• [U-Boot] [PATCH v5 0/2] I2C: Zynq   Michael Burr
• [U-Boot] [PATCH v5 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
  • [U-Boot] [PATCH v5 2/2] I2C:Zynq: Adapt this driver to the new model   Michael Burr
    • [U-Boot] [PATCH v3] spi: mxc_spi: Fix double incrementing read pointer for unaligned buffers   Jagannadha Sutradharudu Teki
    • [U-Boot] [PATCH v3] spi: mxc_spi: Fix double incrementing read pointer for unaligned buffers   Jagan Teki
    • [U-Boot] Pull request: u-boot-spi/master   Jagannadha Sutradharudu Teki
    • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH v6 0/2] I2C: Zynq   Michael Burr
  • [U-Boot] [PATCH v6 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
    • [U-Boot] [PATCH v6 2/2] I2C:Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH v7 0/2] I2C: Zynq   Michael Burr
• [U-Boot] [PATCH v7 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
  • [U-Boot] [PATCH v7 2/2] I2C: Zynq: Adapt this driver to the new model   Michael Burr
• [U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m   Stephen Warren
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • No subject  
  • [U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m   Tom Warren
• [U-Boot] [PATCH v8 0/2] I2C: Zynq   Michael Burr
  • [U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address   Michael Burr
    • [U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address   Heiko Schocher
      • [U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address   Michal Simek
  • [U-Boot] [PATCH v8 0/2] I2C: Zynq   Albert ARIBAUD
  • [U-Boot] [PATCH v8 0/2] I2C: Zynq   Heiko Schocher
    • [U-Boot] [PATCH v8 0/2] I2C: Zynq   Jagan Teki
      • [U-Boot] [PATCH v8 0/2] I2C: Zynq   Heiko Schocher
• [U-Boot] [PATCH v8 2/2] I2C: Zynq: Adapt this driver to the new model   Michael Burr
  • [U-Boot] [PATCH v2] Tegra114: SPL: Set SCLK source to CLK_M before PLLP init.   Tom Warren
  • [U-Boot] [PATCH v2] Tegra114: SPL: Set SCLK source to CLK_M before PLLP init.   Stephen Warren
  • [U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support   Scott Wood
  • [U-Boot] mtd: fix warnings due to 64-bit partition support   Tom Rini
  • [U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support   Stefan Roese
  • [U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support   Paul Burton
  • [U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs   Tom Warren
  • [U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs   Stephen Warren
• [U-Boot] [PATCH 1/2] serial: xuartlite: Staticize local functions   Axel Lin
  • [U-Boot] [PATCH 2/2] serial: s5p: Staticize local functions   Axel Lin
• [U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions   Axel Lin
  • [U-Boot] [PATCH v2 2/2] serial: s5p: Staticize local functions   Axel Lin
    • [U-Boot] [PATCH v2 2/2] serial: s5p: Staticize local functions   Minkyu Kang
  • [U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions   Stefan Roese
    • [U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions   Michal Simek
      • [U-Boot] [PATCH 0/3] All M68K boards are broken   Masahiro Yamada
      • [U-Boot] [PATCH 2/3] m68k: eliminate warnings in do_bootm_linux function   Masahiro Yamada
      • [U-Boot] [PATCH 0/3] All M68K boards are broken   Albert ARIBAUD
      • [U-Boot] [PATCH 0/3] All M68K boards are broken   Masahiro Yamada
      • [U-Boot] [PATCH 0/3] All M68K boards are broken   Albert ARIBAUD
      • [U-Boot] [PATCH 0/3] All M68K boards are broken   Masahiro Yamada
      • [U-Boot] [PATCH 1/3] i2c: eliminate warnings in i2c_reloc_fixup function   Masahiro Yamada
      • [U-Boot] [U-Boot, 1/3] i2c: eliminate warnings in i2c_reloc_fixup function   Heiko Schocher
      • [U-Boot] [PATCH 3/3] m68k: eliminate a warning in cpu_init   Masahiro Yamada
      • [U-Boot] [PATCH] powerpc/t1040: Update defines to support T1040SoC personalities   Priyanka Jain
• [U-Boot] [PATCH 0/2] Microblaze bug-fixes   Michal Simek
  • [U-Boot] [PATCH 2/2] microblaze: Fix watchdog initialization   Michal Simek
    • [U-Boot] [PATCH 0/2] Microblaze bug-fixes   Tom Rini
    • [U-Boot] [PATCH 0/2] Microblaze bug-fixes   Michal Simek
• [U-Boot] [PATCH 1/2] common: fsl: Fix broken SPDX-License-Identifier change   Michal Simek
• [U-Boot] help on adding bootelf to u-boot   Robin Fernandes
  • [U-Boot] help on adding bootelf to u-boot   myan
  • [U-Boot] help on adding bootelf to u-boot   myan
    • [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer   Bo Shen
    • [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer   Marek Vasut
    • [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer   Lukasz Majewski
    • [U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer   Marek Vasut
    • [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value   Bo Shen
• [U-Boot] Is EP88x board dead or not?   Masahiro Yamada
  • [U-Boot] Is EP88x board dead or not?   Albert ARIBAUD
    • [U-Boot] Is EP88x board dead or not?   Masahiro Yamada
      • [U-Boot] Is EP88x board dead or not?   Masahiro Yamada
      • [U-Boot] Is EP88x board dead or not?   Wolfgang Denk
      • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Sricharan R
      • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Enric Balletbo Serra
      • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Tom Rini
      • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Sricharan R
      • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Enric Balletbo Serra
      • [U-Boot] [PATCH 0/4] USB: UMS: code refactoring and usage improvement   Przemyslaw Marczak
      • [U-Boot] [PATCH 2/4] usb: ums: code refactoring to improve reusability at other boards.   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 0/5] USB: UMS: code refactoring and usage improvement   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards.   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards.   Marek Vasut
      • [U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards.   Lukasz Majewski
      • [U-Boot] [PATCH v2 1/5] usb: ums: code refactoring to improve reusability on other boards.   Marek Vasut
      • [U-Boot] [PATCH v2 2/5] usb: ums: allows using every mmc device with ums.   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 3/5] usb: ums: fix disk capacity miscalculation and code cleanup   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 4/5] usb: ums: move ums code from trats to Samsung common directory   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 5/5] usb: ums: add ums exit feature by ctrl+c or by detach usb cable   Przemyslaw Marczak
      • [U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory   Przemyslaw Marczak
      • [U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory   Marek Vasut
      • [U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory   Przemyslaw Marczak
      • [U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory   Marek Vasut
      • [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation.   Przemyslaw Marczak
      • [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation.   Marek Vasut
      • [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation.   Przemyslaw Marczak
      • [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation.   Marek Vasut
      • [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation.   Przemyslaw Marczak
      • [U-Boot] [PATCH 4/4] usb: ums: add ums exit feature by ctrl+c or by detach usb cable   Przemyslaw Marczak
      • [U-Boot] [PATCH 4/4] usb: ums: add ums exit feature by ctrl+c or by detach usb cable   Marek Vasut
      • [U-Boot] [PATCH V2] ARM: OMAP5: DDR3: Change io settings   Sricharan R
      • [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel   Nikita Kiryanov
      • [U-Boot] [PATCH V2 1/6] spi: omap3: remove semicolon from #define   Nikita Kiryanov
      • [U-Boot] [PATCH V2 2/6] spi: omap3: add support for more word lengths   Nikita Kiryanov
      • [U-Boot] [PATCH V2 3/6] spi: define SPI_XFER_ONCE   Nikita Kiryanov
      • [U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support   Nikita Kiryanov
      • [U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support   Anatolij Gustschin
      • [U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF   Nikita Kiryanov
      • [U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF   Anatolij Gustschin
      • [U-Boot] [PATCH V2 6/6] cm_t35: use scf0403 driver   Nikita Kiryanov
• [U-Boot] Freescale P4080 DDR problems   Виталий Андрющенко
  • [U-Boot] Freescale P4080 DDR problems   York Sun
  • [U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420   Simon Glass
    • [U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420   Simon Glass
    • [U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu   Simon Glass
• [U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver   Simon Glass
• [U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP   Simon Glass
  • [U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines   Simon Glass
    • [U-Boot] [PATCH v1 1/1] netconsole loses 2nd character of input   Suriyan Ramasami
    • [U-Boot] [PATCH v1 1/1] netconsole loses 2nd character of input   Joe Hershberger
    • [U-Boot] [ANN] U-Boot v2013.10 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2013.10 released   Wolfgang Denk
      • [U-Boot] [ANN] U-Boot v2013.10 released   Scott Wood
      • [U-Boot] [ANN] U-Boot v2013.10 released   Tom Rini
      • [U-Boot] [ANN] U-Boot v2013.10 released   Scott Wood
      • [U-Boot] [ANN] U-Boot v2013.10 released   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-mpc85xx/master   York Sun
  • [U-Boot] Pull request: u-boot-mpc85xx/master   Tom Rini
• [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/master   Tom Rini
  • [U-Boot] Pull request: u-boot-sh/master   Nobuhiro Iwamatsu
  • [U-Boot] Pull request: u-boot-sh/master   Albert ARIBAUD
  • [U-Boot] Pull request: u-boot-sh/master   Tom Rini
• [U-Boot] Beaglebone LCD support in U-Boot?   Simon Glass
  • [U-Boot] Beaglebone LCD support in U-Boot?   Tom Rini
  • [U-Boot] Beaglebone LCD support in U-Boot?   Simon Glass
  • [U-Boot] [PATCH v2] mpc85xx: Fix the offset of register address error   Yuantian.Tang at freescale.com
  • [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Javier Martinez Canillas
  • [U-Boot] [RESEND PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h   Javier Martinez Canillas
  • [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Javier Martinez Canillas
  • [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h   Tom Rini
• [U-Boot] [PATCH v2] arm: vf610: initial integration for colibri vf50   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board   Albert ARIBAUD
  • [U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
• [U-Boot] fdt performance   Aaron Williams
  • [U-Boot] fdt performance   Albert ARIBAUD
  • [U-Boot] fdt performance   Wolfgang Denk
    • [U-Boot] fdt performance   Andre Renaud
    • [U-Boot] fdt performance   Wolfgang Denk
    • [U-Boot] fdt performance   Michael Pratt
    • [U-Boot] fdt performance   Wolfgang Denk
    • [U-Boot] fdt performance   Michael Pratt
    • [U-Boot] fdt performance   Wolfgang Denk
  • [U-Boot] fdt performance   Simon Glass
• [U-Boot] [PATCH v2] i2c: Add support for Renesas rcar   Heiko Schocher
• [U-Boot] i2c: Zynq: Support for TI PCA9548 bus multiplexer   Heiko Schocher
• [U-Boot] [U-Boot,v4,1/3] i2c: fix init on generic board   Heiko Schocher
• [U-Boot] [U-Boot,v4,2/3] i2c: mxc: move to new subsystem   Heiko Schocher
• [U-Boot] [U-Boot, v4, 3/3] i2c: update config using mxc driver to new subsystem   Heiko Schocher
• [U-Boot] [i2c] Pull request   Heiko Schocher
  • [U-Boot] [i2c] Pull request   Tom Rini
• [U-Boot] [PATCH] zynq: Use arch_cpu_init() instead of lowlevel_init()   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Sricharan R
  • [U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings   Enric Balletbo Serra
    • [U-Boot] [PATCH 1/3] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework   Heiko Schocher
    • [U-Boot] [PATCH 2/3] arm: kzm9g: Update to new I2C framework   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework   Heiko Schocher
    • [U-Boot] [PATCH 3/3] sh: ecovec: Update to new I2C framework   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 0/3] Fix bugs of MAKEALL   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Albert ARIBAUD
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Albert ARIBAUD
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Albert ARIBAUD
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] MAKEALL: fix boards_by_field function   Masahiro Yamada
    • [U-Boot] [PATCH 1/3] MAKEALL: fix awk warning message   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Albert ARIBAUD
    • [U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Albert ARIBAUD
    • [U-Boot] [PATCH 2/3] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Masahiro Yamada
• [U-Boot] [PATCH v2] arm: Remove IXP425 boards pdnb3 and scpu   Albert ARIBAUD
  • [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
  • [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Simon Glass
  • [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Tom Rini
  • [U-Boot] [PATCH v3 01/19] Makefile: prepare for using Kbuild-style Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v3 02/19] armv7: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 03/19] arm926ejs: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 04/19] arm920t: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 05/19] arm720t: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 06/19] ARM: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 07/19] ARM: imx-common: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 08/19] drivers: net: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 09/19] drivers: mtd: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 10/19] drivers: usb: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 11/19] drivers: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 12/19] fs: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 13/19] common: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 14/19] net: convert a makefile to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 15/19] lib: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 16/19] disk: convert a makefile to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 17/19] sandbox: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 18/19] powerpc: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH v3 19/19] board: ti: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Alban Bedel
    • [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Thierry Reding
    • [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Stephen Warren
    • [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Thierry Reding
• [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Albert ARIBAUD
  • [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Albert ARIBAUD
    • [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 3/4] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH V3] ARM: OMAP5: DDR3: Change io settings   Sricharan R
• [U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct   Albert ARIBAUD
  • [U-Boot] [PATCH v2 01/10] arm: vf610: fix anadig register struct   Albert ARIBAUD
    • [U-Boot] [PATCH v4 0/6] Second step towards Kbuild: Descend down like Kbuild   Masahiro Yamada
    • [U-Boot] [PATCH v4 4/6] ARM: tegra: move Tegra specific code under arch/arm/   Masahiro Yamada
    • [U-Boot] [PATCH v4 6/6] ARM: s5pc, exynos: move Samsung ARM SoC specific code under arch/arm/   Masahiro Yamada
    • [U-Boot] [PATCH v4 1/6] Makefile: support descending down to subdirectories   Masahiro Yamada
    • [U-Boot] [PATCH v4 2/6] drivers: move some drivers to drivers/Makefile   Masahiro Yamada
    • [U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile   Masahiro Yamada
    • [U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile   Simon Glass
    • [U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile   Masahiro Yamada
    • [U-Boot] [PATCH v4 3/6] fs: move some file system to fs/Makefile   Simon Glass
    • [U-Boot] [PATCH v4 5/6] ARM: omap: move OMAP specific code under arch/arm/   Masahiro Yamada
• [U-Boot] [PATCH v2 04/10] arm: vf610: add anadig pll5 definitions   Albert ARIBAUD
  • [U-Boot] Replace Redboot with U-boot   Romain Crausaz
  • [U-Boot] [PATCH v2 0/2] ARM: tegra: Add the Tamonten-NG Evaluation carrier boards   Alban Bedel
  • [U-Boot] [PATCH v2 1/2] ARM: tegra: support SKU b1 of Tegra30   Alban Bedel
  • [U-Boot] [PATCH v2 1/2] ARM: tegra: support SKU b1 of Tegra30   Stephen Warren
  • [U-Boot] [PATCH v2 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
  • [U-Boot] [PATCH v2 2/2] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
  • [U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
  • [U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Tom Warren
  • [U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
  • [U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Alban Bedel
  • [U-Boot] [PATCH v3] ARM: tegra: Add the Tamonten™ NG Evaluation Carrier board   Stephen Warren
• [U-Boot] [PATCH 1/3] fpga: zynqpl: Add dcache flush support   Michal Simek
  • [U-Boot] [PATCH 3/3] fpga: Add support for gzip images with bitstreams   Michal Simek
• [U-Boot] [PATCH 2/3] fpga: zynqpl: Do not place bitstream below 1MB   Michal Simek
  • [U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30   Tom Warren
• [U-Boot] [PATCH v2] powerpc/c29xpcie: add DDR ECC on off config setting   York Sun
• [U-Boot] [PATCH 2/2] powerpc/usb:Differentiate USB controller base address   York Sun
  • [U-Boot] [PATCH v7 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver   Tom Rini
• [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Masahiro Yamada
  • [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Simon Glass
    • [U-Boot] [PATCH v3 00/19] First step towards Kbuild: Use Kbuild style makefiles   Simon Glass
  • [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   rvijay435
    • [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   Wolfgang Denk
      • [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   rvijay435
      • [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   rvijay435
      • [U-Boot] Can a standalone application send data via Ethernet in U-Boot?   Wolfgang Denk
      • [U-Boot] [PATCH][v2] powerpc/t1040: Update defines to support T1040SoC personalities   Priyanka Jain
      • [U-Boot] [PATCH 0/5] mtd: nand: enable 8k byte page nand flash support for sama5d3x-ek   Josh Wu
      • [U-Boot] [PATCH 1/5] MTD: nand: increase the max eccpos size to 448 to support 8k page nand   Josh Wu
      • [U-Boot] [PATCH 3/5] sama5d3xek: support larger than 4G nand flash   Josh Wu
      • [U-Boot] [PATCH 4/5] mtd: atmel_nand: don't print bit correction message in driver   Josh Wu
      • [U-Boot] [PATCH 5/5] mtd: atmel_nand: use dev_xxx instead of printk   Josh Wu
      • [U-Boot] [PATCH 2/5] mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash   Josh Wu
      • [U-Boot] [PATCH v4 0/11] Support for the kmp204x reference design   Valentin Longchamp
      • [U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board   Valentin Longchamp
      • [U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board   York Sun
      • [U-Boot] [PATCH v4 04/11] KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned board   Heiko Schocher
      • [U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd   Valentin Longchamp
      • [U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd   York Sun
      • [U-Boot] [PATCH v4 06/11] mpc8xxx: call i2c_set_bus_num in __get_spd   Heiko Schocher
      • [U-Boot] [PATCH v4 08/11] net/fman: add a fm_enable_port function   Valentin Longchamp
      • [U-Boot] [PATCH v4 08/11] net/fman: add a fm_enable_port function   York Sun
      • [U-Boot] [PATCH v4 09/11] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account   Valentin Longchamp
      • [U-Boot] [PATCH v4 09/11] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into account   York Sun
      • [U-Boot] [PATCH v4 10/11] fsl/mpc85xx: define common serdes_clock_to_string function   Valentin Longchamp
      • [U-Boot] [PATCH v4 10/11] fsl/mpc85xx: define common serdes_clock_to_string function   York Sun
      • [U-Boot] [PATCH v4 11/11] mpc85xx: introduce the kmp204x reference design support   Valentin Longchamp
      • [U-Boot] [PATCH v4 11/11] mpc85xx: introduce the kmp204x reference design support   York Sun
      • [U-Boot] [PATCH v4 01/11] powerpc: cast bi_memsize to ulong for %ld usage   Valentin Longchamp
      • [U-Boot] [PATCH v4 01/11] powerpc: cast bi_memsize to ulong for %ld usage   York Sun
      • [U-Boot] [PATCH v4 02/11] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h   Valentin Longchamp
      • [U-Boot] [PATCH v4 02/11] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h   York Sun
      • [U-Boot] [PATCH v4 03/11] KM: fix typo in default environment   Valentin Longchamp
      • [U-Boot] [PATCH v4 03/11] KM: fix typo in default environment   York Sun
      • [U-Boot] [PATCH v4 05/11] KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth init   Valentin Longchamp
      • [U-Boot] [PATCH v4 05/11] KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth init   York Sun
      • [U-Boot] [PATCH v4 07/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it   Valentin Longchamp
      • [U-Boot] [PATCH v4 07/11] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it   York Sun
• [U-Boot] Question about CONFIG_ENV_IS_IN_FAT   Dmitriy Alekseev
  • [U-Boot] Question about CONFIG_ENV_IS_IN_FAT   Tom Rini
  • [U-Boot] Question about CONFIG_ENV_IS_IN_FAT   Wolfgang Denk
    • [U-Boot] [PATCH 0/2][v2] powerpc/t104xrdb: Add support for T1040RDB and T1042RDB_PI   Priyanka Jain
    • [U-Boot] [PATCH 1/2][v2] powerpc/t104xrdb: Add T1040RDB board support   Priyanka Jain
    • [U-Boot] [PATCH 2/2][v2] powerpc/t104xrdb: Add T1042RDB_PI board support   Priyanka Jain
    • [U-Boot] [PATCH 1/2][v3]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   Ramneek Mehresh
    • [U-Boot] [PATCH 1/2][v3]powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socs   York Sun
    • [U-Boot] u-boot boot process is broken, how do i recover?   Philippe Noisette
• [U-Boot] Final talk schedule for U-Boot mini summit and collection of discussion topics   Detlev Zundel
  • [U-Boot] Final talk schedule for U-Boot mini summit and collection of discussion topics   Marek Vasut
    • [U-Boot] [PATCH v3 07/16] dm: Add base driver model support   Simon Glass
  • [U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation   Simon Glass
    • [U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation   Marek Vasut
• [U-Boot] [PATCH v3 10/16] dm: Add a 'dm' command for testing   Simon Glass
  • [U-Boot] [PATCH v3 15/16] dm: Add README for driver model   Simon Glass
    • [U-Boot] [PATCH] pxe: fix handling of absolute paths   Rob Herring
    • [U-Boot] [PATCH] pxe: fix handling of absolute paths   Ian Campbell
    • [U-Boot] [PATCH v3 11/16] dm: Add a demonstration/example driver   Simon Glass
• [U-Boot] [PATCH v3 12/16] dm: Add GPIO support and tests   Simon Glass
• [U-Boot] BUILD_NBUILDS with MAKEALL   York Sun
  • [U-Boot] [PATCH] TI:omap5: Add rdaddr, use consistent loadaddr values   Tom Rini
  • [U-Boot] [PATCH v4 0/16] Driver model implementation, tests, demo and GPIO   Simon Glass
  • [U-Boot] [PATCH v4 01/16] sandbox: Make map_to_sysmem() use a constant pointer   Simon Glass
  • [U-Boot] [PATCH v4 01/16] sandbox: Make map_to_sysmem() use a constant pointer   Marek Vasut
  • [U-Boot] [PATCH v4 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c   Simon Glass
  • [U-Boot] [PATCH v4 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c   Marek Vasut
  • [U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory   Simon Glass
  • [U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory   Marek Vasut
  • [U-Boot] [PATCH v4 03/16] sandbox: config: Don't use 64-bit physical memory   Simon Glass
  • [U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox   Simon Glass
  • [U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox   Marek Vasut
  • [U-Boot] [PATCH v4 04/16] sandbox: Build a device tree file for sandbox   Simon Glass
  • [U-Boot] [PATCH v4 05/16] Add cmd_process_error() to report and process errors   Simon Glass
  • [U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model   Simon Glass
  • [U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model   Marek Vasut
  • [U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model   Simon Glass
  • [U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model   Marek Vasut
  • [U-Boot] [PATCH v4 06/16] sandbox: config: Enable driver model   Simon Glass
  • [U-Boot] [PATCH v4 07/16] dm: Add README for driver model   Simon Glass
  • [U-Boot] [PATCH v4 08/16] dm: Add base driver model support   Simon Glass
  • [U-Boot] [PATCH v4 09/16] dm: Set up driver model after relocation   Simon Glass
  • [U-Boot] [PATCH v4 10/16] dm: Add basic tests   Simon Glass
  • [U-Boot] [PATCH v4 11/16] dm: Add a 'dm' command for testing   Simon Glass
  • [U-Boot] [PATCH v4 12/16] dm: Add a demonstration/example driver   Simon Glass
  • [U-Boot] [PATCH v4 13/16] dm: Add GPIO support and tests   Simon Glass
  • [U-Boot] [PATCH v4 14/16] sandbox: Convert GPIOs to use driver model   Simon Glass
  • [U-Boot] [PATCH v4 15/16] dm: Enable gpio command to support driver model   Simon Glass
  • [U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory   Simon Glass
  • [U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory   Marek Vasut
  • [U-Boot] [PATCH v4 16/16] dm: Move old driver model documentation into an 'old-docs' directory   Simon Glass
  • [U-Boot] [PATCH 0/2] Add usb eth support   Inderpal Singh
  • [U-Boot] [PATCH 1/2] usb: ehci: exynos: set/reset hsic phys   Inderpal Singh
  • [U-Boot] [PATCH 2/2] exynos5: arndale: Add network support   Inderpal Singh
  • [U-Boot] [PATCH] powerpc/83xx: Define USB1 and USB2 base addr for MPC834x   Ramneek Mehresh
  • [U-Boot] [PATCH] powerpc/83xx: Define USB1 and USB2 base addr for MPC834x   York Sun
  • [U-Boot] [PATCH 1/2 v13] Introduced btrfs file-system with btrload command   Adnan Ali
  • [U-Boot] [PATCH 1/2 v13] Introduced btrfs file-system with btrload command   Otavio Salvador
  • [U-Boot] [PATCH 2/2 v13] Enable btrfs support in mx53loco config   Adnan Ali
  • [U-Boot] [PATCH 2/2 v13] Enable btrfs support in mx53loco config   Otavio Salvador
  • [U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file   Simon Glass
    • [U-Boot] [PATCH v2 3/5] Allow U-Boot scripts to be placed in a .env file   Stephen Warren
  • [U-Boot] [PATCH v2 4/5] env: Allow environment files to use the C preprocessor   Simon Glass
• [U-Boot] [PATCH v2 5/5] RFC: tegra: Convert to using environment files   Simon Glass
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Troy Kisky
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
  • [U-Boot] [PATCH] kup: Delete an unused Makefile   Masahiro Yamada
  • [U-Boot] [PATCH 0/2] EP88x: delete remainders of dead board   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] EP88x: remove remainders of dead board   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] README.scrapyard: fix broken format   Masahiro Yamada
  • [U-Boot] [PATCH 0/2] blackfin: fix warnings   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c   Sonic Zhang
  • [U-Boot] [PATCH 1/2] blackfin: fix a warning in arch/blackfin/cpu/initcode.c   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] blackfin: fix a warning in arch/blackfin/cpu/cpu.c   Masahiro Yamada
  • [U-Boot] [PATCH 2/2] blackfin: fix a warning in arch/blackfin/cpu/cpu.c   Sonic Zhang
  • [U-Boot] [PATCH] sparc: include config.h to start.S   Masahiro Yamada
  • [U-Boot] [PATCH v2 0/4] Fix bugs of MAKEALL   Masahiro Yamada
  • [U-Boot] [PATCH v2 1/4] MAKEALL: fix awk warning message   Masahiro Yamada
  • [U-Boot] [PATCH v2 2/4] MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>   Masahiro Yamada
  • [U-Boot] [PATCH v2 3/4] MAKEALL: fix boards_by_field function   Masahiro Yamada
  • [U-Boot] [PATCH v2 4/4] MAKEALL: rename boards_by_* functions to targets_by_*   Masahiro Yamada
  • [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles   Masahiro Yamada
  • [U-Boot] [PATCH 01/18] sparc: fix a link error   Masahiro Yamada
  • [U-Boot] [PATCH 03/18] sparc: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 14/18] board: arm: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 15/18] board: powerpc: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 00/18] Third step towards Kbuild: Convert rest of makefiles   Marek Vasut
  • [U-Boot] [PATCH 02/18] sh: Do not include start.o in lib$(CPU).o   Masahiro Yamada
  • [U-Boot] [PATCH 04/18] sh: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 05/18] avr32: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 06/18] openrisc: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 07/18] microblaze: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 08/18] mips: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 09/18] nds32: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 10/18] nios2: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 11/18] x86: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 12/18] m68k: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style   Sonic Zhang
  • [U-Boot] [PATCH 13/18] blackfin: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 16/18] post: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 17/18] dts, api, test: convert makefiles to Kbuild style   Masahiro Yamada
  • [U-Boot] [PATCH 18/18] Makefile: convert makefiles to Kbuild style and delete grep switch   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] arm: atmel: at91sam9n12ek: add usb host support   Bo Shen
  • [U-Boot] [PATCH 2/2] arm: atmel: get rid of too many ifdeffery   Bo Shen
  • [U-Boot] [PATCH] powerpc/c29xpcie: reverse CPLD register bit   Po Liu
  • [U-Boot] Setting board revision and serial with device tree   Lars Poeschel
    • [U-Boot] [PATCH v5 0/16] Driver model implementation, tests, demo and GPIO   Simon Glass
    • [U-Boot] [PATCH v5 03/16] sandbox: config: Don't use 64-bit physical memory   Simon Glass
    • [U-Boot] [PATCH v5 05/16] Add cmd_process_error() to report and process errors   Simon Glass
    • [U-Boot] [PATCH v5 07/16] dm: Add base driver model support   Simon Glass
    • [U-Boot] [PATCH v5 09/16] dm: Set up driver model after relocation   Simon Glass
    • [U-Boot] [PATCH v5 11/16] dm: Add a 'dm' command for testing   Simon Glass
    • [U-Boot] [PATCH v5 15/16] dm: Enable gpio command to support driver model   Simon Glass
    • [U-Boot] [PATCH v5 16/16] dm: Remove old driver model documentation   Simon Glass
    • [U-Boot] [PATCH v5 01/16] sandbox: Make map_to_sysmem() use a constant pointer   Simon Glass
    • [U-Boot] [PATCH v5 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c   Simon Glass
    • [U-Boot] [PATCH v5 04/16] sandbox: Build a device tree file for sandbox   Simon Glass
    • [U-Boot] [PATCH v5 06/16] dm: Add README for driver model   Simon Glass
    • [U-Boot] [PATCH v5 06/16] dm: Add README for driver model   Marek Vasut
    • [U-Boot] [PATCH v5 08/16] sandbox: config: Enable driver model   Simon Glass
    • [U-Boot] [PATCH v5 10/16] dm: Add basic tests   Simon Glass
    • [U-Boot] [PATCH v5 12/16] dm: Add a demonstration/example driver   Simon Glass
    • [U-Boot] [PATCH v5 13/16] dm: Add GPIO support and tests   Simon Glass
    • [U-Boot] [PATCH v5 14/16] sandbox: Convert GPIOs to use driver model   Simon Glass
• [U-Boot] Does uboot support HID-I2C   David Goodenough
  • [U-Boot] Does uboot support HID-I2C   Heiko Schocher
    • [U-Boot] [RESEND PATCH 0/3] mx28evk environment rework for NAND support   Otavio Salvador
    • [U-Boot] [RESEND PATCH 1/3] mx28evk: Use 512k for fdt partition to align it   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Marek Vasut
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Marek Vasut
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Marek Vasut
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Stefano Babic
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Wolfgang Denk
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Otavio Salvador
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Wolfgang Denk
    • [U-Boot] [RESEND PATCH 2/3] mx28evk: Add 'nandboot' environment command   Stefano Babic
    • [U-Boot] [RESEND PATCH 3/3] mx28evk: Extend environment to easy write of NAND system   Otavio Salvador
    • [U-Boot] [RESEND PATCH] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro   Otavio Salvador
    • [U-Boot] [PATCH] mx6sabresd: Add eMMC specific environment to allow U-Boot update   Otavio Salvador
    • [U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
    • [U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin   Otavio Salvador
    • [U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin   Stefano Babic
    • [U-Boot] [PATCH 2/4] wandboard: add Future Eletronics 7" WVGA LCD extension board   Otavio Salvador
    • [U-Boot] [PATCH 2/4] wandboard: add Future Eletronics 7" WVGA LCD extension board   Tapani Utriainen
    • [U-Boot] [PATCH 3/4] wandboard: Use '0' as bootdelay but interruptable   Otavio Salvador
    • [U-Boot] [PATCH 4/4] wandboard: Pass 'quiet' bootparam by default   Otavio Salvador
• [U-Boot] v2013.10 failed build with jffs2 cmd   Chris Ruehl
  • [U-Boot] [PATCH v1 0/3] arm, at91: support for the taurus and corvus board   Heiko Schocher
  • [U-Boot] [PATCH v1 1/3] at91: add defines for reset type   Heiko Schocher
  • [U-Boot] [PATCH v1 1/3] at91: add defines for reset type   Bo Shen
  • [U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20)   Heiko Schocher
  • [U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20)   Bo Shen
  • [U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20)   Andreas Bießmann
  • [U-Boot] [PATCH v1 2/3] arm, at91: add Siemens board taurus (based on AT91SAM9G20)   Heiko Schocher
  • [U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board   Heiko Schocher
  • [U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board   Bo Shen
  • [U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board   Andreas Bießmann
  • [U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board   Heiko Schocher
  • [U-Boot] [PATCH v1 3/3] arm, at91: add siemens corvus board   Andreas Bießmann
• [U-Boot] v2013.10 failed build with jffs2 cmd   Chris Ruehl
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Igor Grinberg
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Igor Grinberg
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Heiko Schocher
  • [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework   Stefano Babic
  • [U-Boot] [PATCH] video, cfb_console: make background and foreground color configurable   Heiko Schocher
  • [U-Boot] [PATCH] video, cfb_console: make background and foreground color configurable   Anatolij Gustschin
  • [U-Boot] [PATCH] video, formike: change tag/val write   Heiko Schocher
  • [U-Boot] [PATCH] video, formike: change tag/val write   Anatolij Gustschin
  • [U-Boot] [PATCH v1 0/5] arm, am33xx: update for the am33xx based siemens boards   Heiko Schocher
  • [U-Boot] [PATCH v1 1/5] bootcount: store bootcount var in environment   Heiko Schocher
  • [U-Boot] [PATCH v1 1/5] bootcount: store bootcount var in environment   Vaibhav Bedia
  • [U-Boot] [PATCH v1 2/5] arm, am33x: make RTC32K OSC enable configurable   Heiko Schocher
  • [U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable   Heiko Schocher
  • [U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
  • [U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable   Heiko Schocher
  • [U-Boot] [PATCH v1 3/5] usb, g_dnl: make iSerialNumber board configurable   Lukasz Majewski
  • [U-Boot] [PATCH v1 4/5] usb, g_dnl: make bcdDevice value configurable   Heiko Schocher
  • [U-Boot] [PATCH v1 4/5] usb, g_dnl: make bcdDevice value configurable   Lukasz Majewski
  • [U-Boot] [PATCH v1 5/5] arm, am335x: update for the siemens boards   Heiko Schocher
  • [U-Boot] u-boot and uefi   Altunbas Sabri (DC-IA/EAH2)
• [U-Boot] v2013.10 failed build with jffs2 cmd   Wolfgang Denk
  • [U-Boot] v2013.10 failed build with jffs2 cmd   Chris Ruehl
    • [U-Boot] v2013.10 failed build with jffs2 cmd   Chris Ruehl
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Wolfgang Denk
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Chris Ruehl
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Wolfgang Denk
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Chris Ruehl
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Daniel Schwierzeck
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Wolfgang Denk
      • [U-Boot] [PATCH] JFFS2: Fix undefined reference to `__aeabi_uldivmod' error   Chris Ruehl
      • [U-Boot] [PATCH v2] arm: ep9315: Return back Cirrus Logic EDB9315A board support   sergey.kostanbaev
  • [U-Boot] [PATCH 1/1] TPM: STMicroelectronics u-boot driver I2C   Simon Glass
    • [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Andre Heider
    • [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Stephen Warren
    • [U-Boot] [PATCH 1/2] ARM: bcm2835: add missing mbox overscan response field   Andre Heider
    • [U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes   Andre Heider
    • [U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes   Stephen Warren
    • [U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes   Andre Heider
    • [U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes   Andre Heider
    • [U-Boot] [PATCH 2/2] video: bcm2835: fix various output modes   Stephen Warren
    • [U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value   Andre Heider
    • [U-Boot] [PATCH v2 2/2] video: bcm2835: respect the pitch value   Stephen Warren
    • [U-Boot] [PATCH 1/1] usb: rename board_usb_init_type to usb_init_type   Troy Kisky
    • [U-Boot] [PATCH 1/1] usb: rename board_usb_init_type to usb_init_type   Tom Rini
• [U-Boot] [PATCH] usb:ohci-hcd: submit_common_msg: report actual_length properly   Mateusz Kulikowski
  • [U-Boot] [PATCH] usb:ohci-hcd: submit_common_msg: report actual_length properly   Marek Vasut
    • [U-Boot] [PATCH v2] usb: ohci-hcd: submit_common_msg: report actual_length properly   Mateusz Kulikowski
    • [U-Boot] [PATCH v2] usb: ohci-hcd: submit_common_msg: report actual_length properly   Marek Vasut
• [U-Boot] [PATCH] cmd_nvedit.c: Add env exists command   Andrew Ruder
  • [U-Boot] [PATCH] cmd_nvedit.c: Add env exists command   James Chargin
    • [U-Boot] [PATCH] cmd_nvedit.c: Add env exists command   Andrew Ruder
• [U-Boot] [PATCH] net: dm9000: random mac address support   Andrew Ruder
• [U-Boot] [PATCH] net: tftpsrv: Get correct client MAC address   Andrew Ruder
• [U-Boot] [PATCH] spi: soft_spi: Support NULL din/dout buffers   Andrew Ruder
• [U-Boot] Bad Linux ARM zImage magic   claus anders
  • [U-Boot] Bad Linux ARM zImage magic   Robert Nelson
  • [U-Boot] [PATCH] blackfin: Move machine specific gpio_port_t structure back to blackfin arch folder.   Sonic Zhang
  • [U-Boot] Fwd: [PATCH 1/6] exynos_fb: Remove usage of static defines   Ajay kumar
    • [U-Boot] Fwd: [PATCH 1/6] exynos_fb: Remove usage of static defines   Simon Glass
    • [U-Boot] [PATCH 00/15] MIPS Malta board support   Paul Burton
    • [U-Boot] [PATCH 05/15] pcnet: enable the NOUFLO feature   Paul Burton
    • [U-Boot] [PATCH 06/15] pci.h: allow inclusion in assembly source   Paul Burton
    • [U-Boot] [PATCH 07/15] qemu-malta: rename to just "malta"   Paul Burton
    • [U-Boot] [PATCH 07/15] qemu-malta: rename to just "malta"   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Paul Burton
    • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Gabor Juhos
    • [U-Boot] [PATCH 08/15] malta: setup super I/O UARTs   Paul Burton
    • [U-Boot] [PATCH v2 08/15] malta: setup super I/O UARTs   Paul Burton
    • [U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards   Paul Burton
    • [U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 09/15] malta: support for coreFPGA6 boards   Paul Burton
    • [U-Boot] [PATCH v2 09/15] malta: support for coreFPGA6 boards   Gabor Juhos
    • [U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards   Paul Burton
    • [U-Boot] [PATCH 10/15] malta: display "U-boot" on the LCD screen   Paul Burton
    • [U-Boot] [PATCH v2 10/15] malta: display "U-boot" on the LCD screen   Paul Burton
    • [U-Boot] [PATCH 11/15] malta: enable CONFIG_PCNET_79C973, PCNET_HAS_PROM, CONFIG_CMD_DHCP   Paul Burton
    • [U-Boot] [PATCH 12/15] malta: remove cache size definitions   Paul Burton
    • [U-Boot] [PATCH 13/15] malta: disable L2 caches   Paul Burton
    • [U-Boot] [PATCH v2 13/15] malta: disable L2 caches   Paul Burton
    • [U-Boot] [PATCH 14/15] malta: add script & instructions to flash U-boot   Paul Burton
    • [U-Boot] [PATCH 14/15] malta: add script & instructions to flash U-boot   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 14/15] malta: add script & instructions to flash U-boot   Paul Burton
    • [U-Boot] [PATCH 15/15] malta: add myself to maintainers   Paul Burton
    • [U-Boot] [PATCH v2 15/15] malta: add myself to maintainers   Paul Burton
    • [U-Boot] [PATCH 01/15] mips32: detect L1 cache sizes if they're not defined   Paul Burton
    • [U-Boot] [PATCH 02/15] pcnet: code style cleanup   Paul Burton
    • [U-Boot] [PATCH 03/15] pcnet: s/le16_to_cpu/cpu_to_le16/ in pcnet_send   Paul Burton
    • [U-Boot] [PATCH 04/15] pcnet: add cache flushing & invalidation   Paul Burton
    • [U-Boot] [PATCH] boards.cfg: remove trailing whitespace   Paul Burton
    • [U-Boot] [PATCH] powerpc/t4240: set pcie liodn in the correct register   Laurentiu Tudor
    • [U-Boot] [PATCH] powerpc/t4240: fix per pci endpoint liodn offsets   Laurentiu Tudor
    • [U-Boot] [PATCH] powerpc/85xx: fix broken cpu "clock-frequency" property   Laurentiu Tudor
  • [U-Boot] Fat write problem   Ruud Commandeur
• [U-Boot] ARM: interrupt_init before relocation, write fails   Joe Kulikauskas
  • [U-Boot] ARM: interrupt_init before relocation, write fails   Andrew Ruder
    • [U-Boot] [U-Boot, v2, 3/4] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ   Tom Rini
    • [U-Boot] [U-Boot, v2, 4/4] arm: rmobile: armadillo-800eva: Change clock definition of SCIF and TMU   Tom Rini
• [U-Boot] check if board is in uboot / kernel via ethernet?   Andreas Neubacher
  • [U-Boot] check if board is in uboot / kernel via ethernet?   Abraham V.
• [U-Boot] LCD LVDS support in u-boot to display splash screen on OMAP4460   bin4ry
• [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Paul Burton
  • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Gabor Juhos
    • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Paul Burton
      • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Daniel Schwierzeck
      • [U-Boot] [PATCH v2 07/15] qemu-malta: rename to just "malta"   Gabor Juhos
      • [U-Boot] [PATCH v3 07/15] qemu-malta: rename to just "malta"   Paul Burton
• [U-Boot] [PATCH 09/15] malta: support for coreFPGA6 boards   Daniel Schwierzeck
  • [U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES   Gabor Juhos
  • [U-Boot] [PATCH] malta: define CONFIG_MEMSIZE_IN_BYTES   Paul Burton
• [U-Boot] u-boot and Linux hanle ubifs ecc in different way on beaglebon variant board   matti kaasinen
  • [U-Boot] u-boot and Linux hanle ubifs ecc in different way on beaglebon variant board   Tim Harvey
    • [U-Boot] [PATCH] cmd_sf: Mention in the help text that mode, addr, offset and len must be given in hex.   Jakob Unterwurzacher
    • [U-Boot] [PATCH] malta: enable RTC support   Paul Burton
• [U-Boot] Pull-request: u-boot-mpc85xx/master   York Sun
  • [U-Boot] Pull-request: u-boot-mpc85xx/master   Tom Rini
• [U-Boot] Changing CONFIG_SYS_PROMPT on the fly   Laszlo Papp
  • [U-Boot] Changing CONFIG_SYS_PROMPT on the fly   Laszlo Papp
    • [U-Boot] Changing CONFIG_SYS_PROMPT on the fly   Simon Glass
    • [U-Boot] boards/p2041rdb: U-Boot 2013.10 SD Card Booting Issue   Ryan Barnett
      • [U-Boot] boards/p2041rdb: U-Boot 2013.10 SD Card Booting Issue   Ryan Barnett
      • [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use   Haijun Zhang
      • [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit   Haijun Zhang
      • [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit   sun york-R58495
      • [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit   Scott Wood
      • [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit   Zhang Haijun
      • [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use   Ryan Barnett
      • [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use   Zhang Haijun
      • [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use   Haijun Zhang
      • [U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Haijun Zhang
      • [U-Boot] [PATCH 0/6][v2] powerpc: Add support 2 stage boot loader for corenet platform   Prabhakar Kushwaha
      • [U-Boot] [PATCH 1/6][v2] powerpc:Add support of SPL non-relocation   Prabhakar Kushwaha
      • [U-Boot] [PATCH 2/6][v2] powerpc/SPL:Allow Parsing of LAW table in both SPL & non SPL   Prabhakar Kushwaha
      • [U-Boot] [PATCH 3/6][v2] common/env: Point default envirenoment for GD   Prabhakar Kushwaha
      • [U-Boot] [PATCH 4/6][v2] Makefile:Add u-boot-with-spl-pbl.bin target for SPL   Prabhakar Kushwaha
      • [U-Boot] [PATCH 5/6][v2] SPL:Defines function required to env read for IFC & env_nand   Prabhakar Kushwaha
      • [U-Boot] [PATCH 6/6][v2] T1040QDS: Add support of 2 stage NAND boot loader   Prabhakar Kushwaha
      • [U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support   Priyanka Jain
      • [U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support   York Sun
      • [U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support   Jain Priyanka-B32167
      • [U-Boot] [PATCH] powerpc/t1040qds: Add DDR Raw Timing support   sun york-R58495
      • [U-Boot] [PATCH] powerpc/t1040qds: Correct Maintainer name in boards.cfg   Priyanka Jain
  • [U-Boot] u-boot hw assisted BCH8 not compatible with am335x architecure   matti kaasinen
    • [U-Boot] u-boot hw assisted BCH8 not compatible with am335x architecure   matti kaasinen
• [U-Boot] MPC8641D stucks before relocation   Ashish Khetan
  • [U-Boot] MPC8641D stucks before relocation   York Sun
    • [U-Boot] MPC8641D stucks before relocation   Ashish Khetan
      • [U-Boot] MPC8641D stucks before relocation   Ashish Khetan
      • [U-Boot] MPC8641D stucks before relocation   York Sun
      • [U-Boot] [[PATCH]pandaboard: 0/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik
      • [U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik
      • [U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Dan Murphy
      • [U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
      • [U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Hardik Patel
      • [U-Boot] [[PATCH]pandaboard: 1/1] Modification of Elpida DDR2 RAM for Pandaboard-ES Rev B3   Tom Rini
      • [U-Boot] [PATCH v3 0/5] env: Add support for environment files   Simon Glass
      • [U-Boot] [PATCH v3 0/5] env: Add support for environment files   Otavio Salvador
      • [U-Boot] [PATCH v3 0/5] env: Add support for environment files   Wolfgang Denk
      • [U-Boot] [PATCH v3 0/5] env: Add support for environment files   Simon Glass
      • [U-Boot] [PATCH v3 1/5] sandbox: Support 'env import' and 'env export'   Simon Glass
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Simon Glass
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Simon Glass
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Simon Glass
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Wolfgang Denk
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Otavio Salvador
      • [U-Boot] [PATCH v3 3/5] Allow U-Boot scripts to be placed in a .env file   Simon Glass
      • [U-Boot] [PATCH v3 4/5] env: Allow environment files to use the C preprocessor   Simon Glass
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Simon Glass
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Stephen Warren
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Simon Glass
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Stephen Warren
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Simon Glass
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Stephen Warren
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Simon Glass
      • [U-Boot] [PATCH v3 5/5] RFC: tegra: Convert to using environment files   Stephen Warren
      • [U-Boot] [PATCH v3 2/5] Make 'run' use run_command_list() instead of run_command()   Simon Glass
  • [U-Boot] Does FDI-LPC3250-UART 6 and 7 Init in UBOOT or Not ?   Pradeep
    • [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
    • [U-Boot] [PATCH v4 1/8] Implement autoconf header file   Simon Glass
    • [U-Boot] [PATCH v4 2/8] main: Use autoconf for boot retry feature   Simon Glass
    • [U-Boot] [PATCH v4 3/8] main: Remove CONFIG #ifdefs from the abortboot() code   Simon Glass
    • [U-Boot] [PATCH v4 4/8] main: Use autoconf to remove #ifdefs around process_boot_delay()   Simon Glass
    • [U-Boot] [PATCH v4 5/8] main: Use autoconf for boot_delay code   Simon Glass
    • [U-Boot] [PATCH v4 6/8] main: Use autoconf for parser selection   Simon Glass
    • [U-Boot] [PATCH v4 6/8] main: Use autoconf for parser selection   Michal Simek
    • [U-Boot] [PATCH v4 7/8] main: Use autoconf in command line reading   Simon Glass
    • [U-Boot] [PATCH v4 8/8] main: Use autoconf in main_loop()   Simon Glass
    • [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Wolfgang Denk
    • [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Tom Rini
    • [U-Boot] [PATCH v4 0/8] Provide a mechanism to avoid using #ifdef everywhere   Simon Glass
• [U-Boot] Minutes from the U-Boot Mini Summit 2013   Detlev Zundel
  • [U-Boot] Configuring U-Boot through device tree (was: Minutes from the U-Boot Mini Summit 2013)   Dirk Behme
    • [U-Boot] Configuring U-Boot through device tree (was: Minutes from the U-Boot Mini Summit 2013)   Wolfgang Denk
    • [U-Boot] Configuring U-Boot through device tree   Stephen Warren
  • [U-Boot] Minutes from the U-Boot Mini Summit 2013   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Bo Shen
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Heiko Schocher
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Bo Shen
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Heiko Schocher
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Mateusz Kulikowski
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Andreas Bießmann
    • [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Andreas Bießmann
• [U-Boot] Illegal use of FP ops in clock_ti814x.c   Wolfgang Denk
  • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Tom Rini
  • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Måns Rullgård
    • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Wolfgang Denk
      • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Måns Rullgård
      • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Wolfgang Denk
      • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Tom Rini
      • [U-Boot] Illegal use of FP ops in clock_ti814x.c   Måns Rullgård
      • [U-Boot] [PATCH] powerpc/T1040EMU: Add T1040 emulator support   Priyanka Jain
      • [U-Boot] [PATCH] powerpc/T1040EMU: Add T1040 emulator support   Wolfgang Denk
• [U-Boot] Question about patman   Masahiro Yamada
  • [U-Boot] Question about patman   Simon Glass
• [U-Boot] Should be Acked-by and Reviewed-by inherited for updated patches?   Masahiro Yamada
  • [U-Boot] Should be Acked-by and Reviewed-by inherited for updated patches?   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH] cosmetic: sf: hex values are in lower case   Luka Perkov
    • [U-Boot] [PATCH] sf: probe: add support for MX25L2006E   Luka Perkov
• [U-Boot] [U-boot] getstr() function?   TigerLiu at viatech.com.cn
  • [U-Boot] [U-boot] getstr() function?   Wolfgang Denk
    • [U-Boot] [PATCH] ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot target   Jens Scharsig (BuS Elektronik)
    • [U-Boot] [PATCH][v2] powerpc/T1040EMU: Add T1040 emulator support   Priyanka Jain
    • [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Marek Vasut
    • [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Fabio Estevam
    • [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Marek Vasut
    • [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot   Stefano Babic
    • [U-Boot] [PATCH 2/2] ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900   Marek Vasut
    • [U-Boot] [PATCH 2/2] ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900   Stefano Babic
• [U-Boot] [PATCH v4 4/8] main: Use autoconf to remove #ifdefs around process_boot_delay()   Michal Simek
  • [U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0   Haijun Zhang
  • [U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0   Scott Wood
  • [U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0   Zhang Haijun
  • [U-Boot] [PATCH] powerpc/esdhc: Map register for eSDHC host controller 3.0   Haijun Zhang
  • [U-Boot] [PATCH v2] i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)   Heiko Schocher
  • [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support   Rajeshwari S Shinde
  • [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file   Rajeshwari S Shinde
  • [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 initialization for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 07/10 V6] DTS: Add dts support for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 08/10 V6] Config: Add initial config for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 09/10 V6] SPL: EXYNOS: Prepare for variable size SPL support   Rajeshwari S Shinde
  • [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC   Rajeshwari S Shinde
  • [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC   Jaehoon Chung
  • [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC   Pantelis Antoniou
  • [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support   Rajeshwari Birje
  • [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization for 5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio   Rajeshwari S Shinde
  • [U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420   Rajeshwari S Shinde
  • [U-Boot] [PATCH v3 1/2] arm: rmobile: Add support r8a7790   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v3 2/2] arm: rmobile: Add support lager board   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 1/2] arm: rmobile: Add support R8A7791   Nobuhiro Iwamatsu
  • [U-Boot] [PATCH v2 2/2] arm: rmobile: Add support koelsch board   Nobuhiro Iwamatsu
  • [U-Boot] fw_setenv device not accessible   pshambhu
    • [U-Boot] fw_setenv device not accessible   Wolfgang Denk
      • [U-Boot] [RFC PATCH 0/3] at91: remove legacy gpio API   Andreas Bießmann
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Andreas Bießmann
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Bo Shen
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Andreas Bießmann
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Jens Scharsig
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Andreas Bießmann
      • [U-Boot] [RFC PATCH 1/3] at91: add new gpio pin macros   Heiko Schocher
      • [U-Boot] [RFC PATCH 2/3] at91sam9263ek: remove ATMEL_LEGACY   Andreas Bießmann
      • [U-Boot] [RFC PATCH 3/3] at91: use generic gpio API for AT91_LED   Andreas Bießmann
      • [U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic   Fabio Estevam
      • [U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic   Eric Nelson
      • [U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic   Stefano Babic
      • [U-Boot] [PATCH] video: ipu_disp: Fix clock polarity logic   Anatolij Gustschin
• [U-Boot] [U-boot] DFU and fastboot question   TigerLiu at viatech.com.cn
  • [U-Boot] [U-boot] DFU and fastboot question   Lukasz Majewski
    • [U-Boot] [U-boot] DFU and fastboot question   Marek Vasut
      • [U-Boot] [PATCH 1/2 V2] esdhc: memset mmc struct before putting into use   Haijun Zhang
      • [U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Haijun Zhang
      • [U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Scott Wood
      • [U-Boot] [PATCH 2/2 V2] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Pantelis Antoniou
      • [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Haijun Zhang
      • [U-Boot] [PATCH 2/2 V2] Powerpc/esdhc: Add simple description of esdhc register   Haijun Zhang
      • [U-Boot] [PATCH 2/2 V2] Powerpc/esdhc: Add simple description of esdhc register   Pantelis Antoniou
      • [U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0   Pantelis Antoniou
      • [U-Boot] [PATCH 1/2] powerpc: spiflash:Add corenet devices support in eSPI SPL   Priyanka Jain
      • [U-Boot] [PATCH 2/2] T1040QDS: Add support of 2 stage SPI bootloader   Priyanka Jain
• [U-Boot] SPL Dfu update   Michael Trimarchi
  • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Lukasz Majewski
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Stefano Babic
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Otavio Salvador
    • [U-Boot] SPL Dfu update   Stefano Babic
    • [U-Boot] SPL Dfu update   Eric Nelson
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Wolfgang Denk
    • [U-Boot] SPL Dfu update   Eric Nelson
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Wolfgang Denk
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Wolfgang Denk
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Wolfgang Denk
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Otavio Salvador
    • [U-Boot] SPL Dfu update   Michael Trimarchi
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] SPL Dfu update   Tom Rini
    • [U-Boot] [RFC PATCH 0/7] arm: atmel: sama5d3: enable spl boot from SD card   Bo Shen
    • [U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
    • [U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals   Heiko Schocher
    • [U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals   Andreas Bießmann
    • [U-Boot] [RFC PATCH 1/7] arm: atmel: sama5d3: early enable PIO peripherals   Bo Shen
    • [U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Bo Shen
    • [U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Andreas Bießmann
    • [U-Boot] [RFC PATCH 2/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT   Bo Shen
    • [U-Boot] [RFC PATCH 3/7] arm: atmel: the offset of MULA is 18 in sama5d3   Bo Shen
    • [U-Boot] [RFC PATCH 4/7] arm: atmel: sama5: correct the error define of DIV   Bo Shen
    • [U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function   Bo Shen
    • [U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function   Andreas Bießmann
    • [U-Boot] [RFC PATCH 5/7] arm: atmel: add plla and mck initialize function   Bo Shen
    • [U-Boot] [RFC PATCH 6/7] arm: atmel: add ddr2 initialization function   Bo Shen
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Bo Shen
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Heiko Schocher
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Andreas Bießmann
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Heiko Schocher
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Andreas Bießmann
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Bo Shen
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Heiko Schocher
    • [U-Boot] [RFC PATCH 7/7] spl: mmc: FAT support boot u-boot   Bo Shen
    • [U-Boot] [PATCH] Add support for SX151x SPI GPIO Expanders   Viktar Palstsiuk
    • [U-Boot] [PATCH] Add support for SX151x SPI GPIO Expanders   Wolfgang Denk
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/master   Tom Rini
  • [U-Boot] [PATCH 0/6] at91: get rid of long standing work around CONFIG_AT91_LEGACY   Andreas Bießmann
  • [U-Boot] [PATCH 1/6] video: remove AT91 legacy API from bus_vcxk   Andreas Bießmann
  • [U-Boot] [PATCH 2/6] i2c: switch from AT91 legacy to ATMEL legacy   Andreas Bießmann
  • [U-Boot] [PATCH 2/6] i2c: switch from AT91 legacy to ATMEL legacy   Heiko Schocher
  • [U-Boot] [PATCH 3/6] at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY   Andreas Bießmann
  • [U-Boot] [PATCH 3/6] at91sam9m10g45ek: remove unused CONFIG_AT91_LEGACY   Bo Shen
  • [U-Boot] [PATCH 4/6] snapper9260: remove unused AT91_LEGACY   Andreas Bießmann
  • [U-Boot] [PATCH 5/6] net: remove unused CONFIG_AT91_LEGACY   Andreas Bießmann
  • [U-Boot] [PATCH 6/6] at91: remove all occourances of CONFIG_AT91_LEGACY   Andreas Bießmann
• [U-Boot] [PATCH] serial: zynq: Remove unused #defines   Michal Simek
• [U-Boot] [PATCH 1/2] arm: zynq: Do not remap OCM to high address   Michal Simek
  • [U-Boot] [PATCH 2/2] arm: zynq : Revert TZ_DDR_RAM to secure.   Michal Simek
    • [U-Boot] Patch about mmc and sdhci, Please look it, i can not pull the patch. I copy it here.   Pantelis Antoniou
    • [U-Boot] [PATCH] nand_util.c: Correct licensing   Tom Rini
    • [U-Boot] [PATCH] nand_util.c: Correct licensing   Wolfgang Denk
    • [U-Boot] [PATCH] nand_util.c: Correct licensing   Tom Rini
    • [U-Boot] [PATCH] nand_util.c: Correct licensing   Scott Wood
    • [U-Boot] [PATCH 1/2 V3] esdhc: memset mmc struct before putting into use   Haijun Zhang
    • [U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Haijun Zhang
    • [U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Pantelis Antoniou
    • [U-Boot] [PATCH 2/2 V3] powerpc/esdhc: Add 3.3v voltage support in esdhc capacity register   Zhang Haijun
    • [U-Boot] [PATCH 1/2 V3] esdhc: memset mmc struct before putting into use   Pantelis Antoniou
    • [U-Boot] squashfs   Naitik Amin
      • [U-Boot] [Patch v1 0/6] Move Freescale DDR and IFC drivers to common drivers   York Sun
      • [U-Boot] [Patch v1 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver   York Sun
      • [U-Boot] [Patch v1 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx   York Sun
      • [U-Boot] [Patch v1 3/6] Driver/DDR: Add Freescale DDR driver for ARM   York Sun
      • [U-Boot] [Patch v1 4/6] powerpc/mpc8xxx: Extend DDR registers' fields   York Sun
      • [U-Boot] [Patch v1 5/6] Driver/DDR: Update DDR driver to allow non-zero base address   York Sun
      • [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   York Sun
      • [U-Boot] [Patch v1 6/6] Driver/IFC: Move Freescale IFC driver to a common driver   Prabhakar Kushwaha
      • [U-Boot] [PATCH] boards.cfg: remove git leftovers   Luka Perkov
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Luka Perkov
      • [U-Boot] [PATCH] kirkwood: ib62x0: use device tree and update config   Prafulla Wadaskar
      • [U-Boot] Pull request: u-boot-mmc 31102013   Pantelis Antoniou
      • [U-Boot] [PATCH v2] Add support for SX151x SPI GPIO Expanders   Viktar Palstsiuk
      • [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Vidya Sagar
      • [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Tom Warren
      • [U-Boot] [PATCH] tegra: allow build to succeed with SPL disabled   Stephen Warren
      • [U-Boot] [PATCH 1/2] powerpc: mmc: Add corenet devices support in esdhc spl   Priyanka Jain
      • [U-Boot] [PATCH 2/2] T1040QDS: Add support of 2 stage SD bootloader   Priyanka Jain
• [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   myan
  • [U-Boot] [PATCH v2 0/5] Add device tree support for VxWorks   Tom Rini
    • [U-Boot] Festival Shutdown : U-Boot Digest, Vol 65, Issue 50   hemal.patel at slscorp.com
    • [U-Boot] [PATCH v2] nand_util.c: Correct licensing   Tom Rini
• [U-Boot] [PATCH] arm: trats: add the sd-card power control function.   Jaehoon Chung
  • [U-Boot] [PATCH] arm: trats: add the sd-card power control function.   Lukasz Majewski
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Fabio Estevam
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Otavio Salvador
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Stefano Babic
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Rob Herring
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Tom Rini
    • [U-Boot] [PATCH] configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards   Wolfgang Denk
• [U-Boot] [PATCH] imx_watchdog: do not soft-reset while watchdog init   Stefano Babic
• [U-Boot] [PATCH] ARM: mx5: Enable L2 cache   Stefano Babic
• [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro   Stefano Babic
• [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski
  • [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Wolfgang Denk
    • [U-Boot] [RFC][DFU] Unification of dfu_alt_info alt settings description + command execution   Lukasz Majewski