[U-Boot] [PATCH v4 01/18] arm: ls102xa: Add Freescale LS102xA SoC support

Alison Wang b18965 at freescale.com
Thu Aug 14 08:44:50 CEST 2014


From: Wang Huan <b18965 at freescale.com>

The QorIQ LS1 family is built on Layerscape architecture,
the industry's first software-aware, core-agnostic networking
architecture to offer unprecedented efficiency and scale.

Freescale LS102xA is a set of SoCs combines two ARM
Cortex-A7 cores that have been optimized for high
reliability and pack the highest level of integration
available for sub-3 W embedded communications processors
with Layerscape architecture and with a comprehensive
enablement model focused on ease of programmability.

Signed-off-by: Alison Wang <alison.wang at freescale.com>
Signed-off-by: Jason Jin <jason.jin at freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Change log:
 v4: No change.
 v3: Fix checkpatch errors.
 v2: Add serdes support.
     Update DDR frequency and data rate information.
     Fix overflow condition error for the timer.

 arch/arm/cpu/armv7/ls102xa/Makefile               |  12 +
 arch/arm/cpu/armv7/ls102xa/clock.c                | 130 ++++++
 arch/arm/cpu/armv7/ls102xa/cpu.c                  | 103 +++++
 arch/arm/cpu/armv7/ls102xa/fdt.c                  | 128 ++++++
 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c       | 119 ++++++
 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h       |  12 +
 arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c       |  41 ++
 arch/arm/cpu/armv7/ls102xa/timer.c                | 127 ++++++
 arch/arm/include/asm/arch-ls102xa/clock.h         |  23 ++
 arch/arm/include/asm/arch-ls102xa/config.h        |  71 ++++
 arch/arm/include/asm/arch-ls102xa/fsl_serdes.h    |  33 ++
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 461 ++++++++++++++++++++++
 arch/arm/include/asm/arch-ls102xa/imx-regs.h      |  53 +++
 arch/arm/include/asm/config.h                     |   4 +
 arch/arm/include/asm/io.h                         |   8 +-
 drivers/watchdog/Makefile                         |   2 +-
 16 files changed, 1325 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile
 create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c
 create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c
 create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c
 create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
 create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
 create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
 create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c
 create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h
 create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h
 create mode 100644 arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
 create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
 create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h

diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
new file mode 100644
index 0000000..d82ce8d
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y	+= cpu.o
+obj-y	+= clock.o
+obj-y	+= timer.o
+
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
new file mode 100644
index 0000000..8f80c61
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <fsl_ifc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS      2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	u32 ccr;
+#endif
+	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
+	unsigned int cpu;
+	const u8 core_cplx_pll[6] = {
+		[0] = 0,	/* CC1 PPL / 1 */
+		[1] = 0,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 1,	/* CC2 PPL / 2 */
+	};
+
+	const u8 core_cplx_pll_div[6] = {
+		[0] = 1,	/* CC1 PPL / 1 */
+		[1] = 2,	/* CC1 PPL / 2 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 2,	/* CC2 PPL / 2 */
+	};
+
+	uint i;
+	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+	sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+	sys_info->freq_ddrbus = sysclk;
+#endif
+
+	sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
+		RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK;
+	sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
+		RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK;
+
+	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+		ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
+		if (ratio[i] > 4)
+			freq_c_pll[i] = sysclk * ratio[i];
+		else
+			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+	}
+
+	for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
+		u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+				& 0xf;
+		u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+		sys_info->freq_processor[cpu] =
+			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+	}
+
+#if defined(CONFIG_FSL_IFC)
+	ccr = in_be32(&ifc_regs->ifc_ccr);
+	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+#endif
+}
+
+int get_clocks(void)
+{
+	struct sys_info sys_info;
+
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->mem_clk = sys_info.freq_ddrbus * 2;
+
+#if defined(CONFIG_FSL_ESDHC)
+	gd->arch.sdhc_clk = gd->bus_clk;
+#endif
+
+	return 0;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+	return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+	return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+	return gd->bus_clk / 2;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_I2C_CLK:
+		return get_bus_freq(0) / 2;
+	case MXC_ESDHC_CLK:
+		return get_bus_freq(0);
+	case MXC_DSPI_CLK:
+		return get_bus_freq(0) / 2;
+	case MXC_UART_CLK:
+		return get_bus_freq(0) / 2;
+	default:
+		printf("Unsupported clock\n");
+	}
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
new file mode 100644
index 0000000..b7dde45
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	char buf1[32], buf2[32];
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	unsigned int svr, major, minor, ver, i;
+
+	svr = in_be32(&gur->svr);
+	major = SVR_MAJ(svr);
+	minor = SVR_MIN(svr);
+
+	puts("CPU:   Freescale LayerScape ");
+
+	ver = SVR_SOC_VER(svr);
+	switch (ver) {
+	case SOC_VER_SLS1020:
+		puts("SLS1020");
+		break;
+	case SOC_VER_LS1020:
+		puts("LS1020");
+		break;
+	case SOC_VER_LS1021:
+		puts("LS1021");
+		break;
+	case SOC_VER_LS1022:
+		puts("LS1022");
+		break;
+	default:
+		puts("Unknown");
+		break;
+	}
+
+	if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
+		puts("E");
+
+	printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+	puts("Clock Configuration:");
+
+	printf("\n       CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk));
+	printf("\n       Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk));
+	printf("DDR:%-4s MHz (%s MT/s data rate), ",
+	       strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk));
+	puts("\n");
+
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_be32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+	icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+	dcache_enable();
+#endif
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+	tsec_standard_init(bis);
+#endif
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
new file mode 100644
index 0000000..5fd5a82
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <linux/ctype.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+#include <tsec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_fixup_enet_phy_connect_type(void *fdt)
+{
+	struct eth_device *dev;
+	struct tsec_private *priv;
+	const char *enet_path, *phy_path;
+	char enet[16];
+	char phy[16];
+	int phy_node;
+	int i = 0;
+	int enet_id = 0;
+	uint32_t ph;
+
+	while ((dev = eth_get_dev_by_index(i++)) != NULL) {
+		if (strstr(dev->name, "eTSEC1"))
+			enet_id = 0;
+		else if (strstr(dev->name, "eTSEC2"))
+			enet_id = 1;
+		else if (strstr(dev->name, "eTSEC3"))
+			enet_id = 2;
+		else
+			continue;
+
+		priv = dev->priv;
+		if (priv->flags & TSEC_SGMII)
+			continue;
+
+		sprintf(enet, "ethernet%d", enet_id);
+		enet_path = fdt_get_alias(fdt, enet);
+		if (!enet_path)
+			continue;
+
+		sprintf(phy, "enet%d_rgmii_phy", enet_id);
+		phy_path = fdt_get_alias(fdt, phy);
+		if (!phy_path)
+			continue;
+
+		phy_node = fdt_path_offset(fdt, phy_path);
+		if (phy_node < 0)
+			continue;
+
+		ph = fdt_create_phandle(fdt, phy_node);
+		if (ph)
+			do_fixup_by_path_u32(fdt, enet_path,
+					     "phy-handle", ph, 1);
+
+		do_fixup_by_path(fdt, enet_path, "phy-connection-type",
+				 phy_string_for_interface(PHY_INTERFACE_MODE_RGMII_ID),
+				 sizeof(phy_string_for_interface(PHY_INTERFACE_MODE_RGMII_ID)),
+				 1);
+	}
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+	int off;
+	int val;
+	unsigned long busclk = get_bus_freq(0);
+
+	fdt_fixup_ethernet(blob);
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		val = gd->cpu_clk;
+		fdt_setprop(blob, off, "clock-frequency", &val, 4);
+		off = fdt_node_offset_by_prop_value(blob, off,
+						    "device_type", "cpu", 4);
+	}
+
+	do_fixup_by_prop_u32(blob, "device_type", "soc",
+			     4, "bus-frequency", busclk / 2, 1);
+
+	ft_fixup_enet_phy_connect_type(blob);
+
+#ifdef CONFIG_SYS_NS16550
+	do_fixup_by_compat_u32(blob, "fsl,ns16550",
+			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+	do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
+			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+
+#if defined(CONFIG_FSL_ESDHC)
+	fdt_fixup_esdhc(blob, bd);
+#endif
+
+	/*
+	 * platform bus clock = system bus clock/2
+	 * Here busclk = system bus clock
+	 * We are using the platform bus clock as 1588 Timer reference
+	 * clock source select
+	 */
+	do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer",
+			       "timer-frequency", busclk / 2, 1);
+
+	/*
+	 * clock-freq should change to clock-frequency and
+	 * flexcan-v1.0 should change to p1010-flexcan respectively
+	 * in the future.
+	 */
+	do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
+			       "clock_freq", busclk / 2, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
+			       "clock-frequency", busclk / 2, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
+			       "clock-frequency", busclk / 2, 1);
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
new file mode 100644
index 0000000..a671158
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include "fsl_ls1_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u64 serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u64 serdes2_prtcl_map;
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	u64 ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	ret |= (1ULL << device) & serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	ret |= (1ULL << device) & serdes2_prtcl_map;
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 cfg = in_be32(&gur->rcwsr[4]);
+	int i;
+
+	switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	case FSL_SRDS_1:
+		cfg &= RCWSR4_SRDS1_PRTCL_MASK;
+		cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	case FSL_SRDS_2:
+		cfg &= RCWSR4_SRDS2_PRTCL_MASK;
+		cfg >>= RCWSR4_SRDS2_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+	/* Is serdes enabled at all? */
+	if (unlikely(cfg == 0))
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u64 serdes_prtcl_map = 0;
+	u32 cfg;
+	int lane;
+
+	cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+	cfg >>= sd_prctl_shift;
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+
+		serdes_prtcl_map |= (1ULL << lane_prtcl);
+	}
+
+	return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+	serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+					CONFIG_SYS_FSL_SERDES_ADDR,
+					RCWSR4_SRDS1_PRTCL_MASK,
+					RCWSR4_SRDS1_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+	serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+					CONFIG_SYS_FSL_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+					RCWSR4_SRDS2_PRTCL_MASK,
+					RCWSR4_SRDS2_PRTCL_SHIFT);
+#endif
+}
+
+const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	default:
+		return "100";
+	}
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
new file mode 100644
index 0000000..834aa53
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_LS1_SERDES_H
+#define __FSL_LS1_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+#endif /* __FSL_LS1_SERDES_H */
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
new file mode 100644
index 0000000..cc53910
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1},
+	[0x10] = {PCIE1, SATA1, PCIE2, PCIE2},
+	[0x20] = {PCIE1, SGMII_TSEC1, PCIE2, SGMII_TSEC2},
+	[0x30] = {PCIE1, SATA1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x40] = {PCIE1, PCIE1, SATA1, SGMII_TSEC2},
+	[0x50] = {PCIE1, PCIE1, PCIE2, SGMII_TSEC2},
+	[0x60] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x70] = {PCIE1, SATA1, PCIE2, SGMII_TSEC2},
+	[0x80] = {PCIE2, PCIE2, PCIE2, PCIE2},
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+
+	if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_cfg_tbl[prtcl][i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
new file mode 100644
index 0000000..11b17b2
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+	ulong ticks;
+
+	if (usec < 1000)
+		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+	else
+		ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+	return ticks;
+}
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, freq);
+
+	return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	usec = usec * freq  + 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+int timer_init(void)
+{
+	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
+	unsigned long ctrl, val, freq;
+
+	/* Enable System Counter */
+	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
+
+	freq = GENERIC_TIMER_CLK;
+	asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* Set PL1 Physical Timer Ctrl */
+	ctrl = ARCH_TIMER_CTRL_ENABLE;
+	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+
+	/* Set PL1 Physical Comp Value */
+	val = TIMER_COMP_VAL;
+	asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	unsigned long long now;
+
+	asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
+
+	gd->arch.tbl = (unsigned long)(now & 0xffffffff);
+	gd->arch.tbu = (unsigned long)(now >> 32);
+
+	return now;
+}
+
+unsigned long get_timer_masked(void)
+{
+	return tick_to_time(get_ticks());
+}
+
+unsigned long get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/* delay x useconds and preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	unsigned long tmo;
+
+	start = get_ticks();			/* get current timestamp */
+	tmo = us_to_tick(usec);			/* convert usecs to ticks */
+
+	while ((get_ticks() - start) < tmo)
+		;				/* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+	unsigned long freq;
+
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+	return freq;
+}
diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h
new file mode 100644
index 0000000..fd36bb0
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/clock.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
+#define __ASM_ARCH_LS102XA_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_UART_CLK,
+	MXC_ESDHC_CLK,
+	MXC_I2C_CLK,
+	MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
new file mode 100644
index 0000000..ddc747f
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV7_LS102xA_CONFIG_
+#define _ASM_ARMV7_LS102xA_CONFIG_
+
+#define CONFIG_SYS_CACHELINE_SIZE		64
+
+#define CONFIG_SYS_IMMR				0x01000000
+
+#define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_SCFG_ADDR		(CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_SERDES_ADDR		(CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_LS1_CLK_ADDR		(CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011d0500)
+
+#define CONFIG_SYS_TSEC1_OFFSET			0x01d10000
+#define CONFIG_SYS_TSEC2_OFFSET			0x01d50000
+#define CONFIG_SYS_TSEC3_OFFSET			0x01d90000
+#define CONFIG_SYS_MDIO1_OFFSET			0x01d24000
+
+#define TSEC_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#define SCTR_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01b00000)
+
+#define I2C1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x011a0000)
+
+#define WDOG1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR				(CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
+
+#ifdef CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
+#define CONFIG_SYS_FSL_DDR
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED			CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+#endif
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+
+#define CONFIG_SYS_FSL_SRDS_1
+
+#ifdef CONFIG_LS102xA
+#define CONFIG_MAX_CPUS				2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
+#define CONFIG_NUM_DDR_CONTROLLERS		1
+#else
+#error SoC not defined
+#endif
+
+#endif /* _ASM_ARMV7_LS102xA_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
new file mode 100644
index 0000000..3a92f5a
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+enum srds_prtcl {
+	NONE = 0,
+	PCIE1,
+	PCIE2,
+	SATA1,
+	SGMII_TSEC1,
+	SGMII_TSEC2,
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+const char *serdes_clock_to_string(u32 clock);
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+
+#endif /* __FSL_SERDES_H */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
new file mode 100644
index 0000000..65fb4bf
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -0,0 +1,461 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
+#define __ASM_ARCH_LS102XA_IMMAP_H_
+
+#define SVR_MAJ(svr)		(((svr) >>  4) & 0xf)
+#define SVR_MIN(svr)		(((svr) >>  0) & 0xf)
+#define SVR_SOC_VER(svr)	(((svr) >> 8) & 0x7ff)
+#define IS_E_PROCESSOR(svr)	(svr & 0x80000)
+
+#define SOC_VER_SLS1020		0x00
+#define SOC_VER_LS1020		0x10
+#define SOC_VER_LS1021		0x11
+#define SOC_VER_LS1022		0x12
+
+#define RCWSR0_SYS_PLL_RAT_SHIFT	25
+#define RCWSR0_SYS_PLL_RAT_MASK		0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT	16
+#define RCWSR0_MEM_PLL_RAT_MASK		0x3f
+
+#define RCWSR4_SRDS1_PRTCL_SHIFT	24
+#define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
+
+#define TIMER_COMP_VAL			0xffffffff
+#define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
+
+struct sys_info {
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+};
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+	u32     porsr1;         /* POR status 1 */
+	u32     porsr2;         /* POR status 2 */
+	u8      res_008[0x20-0x8];
+	u32     gpporcr1;       /* General-purpose POR configuration */
+	u32	gpporcr2;
+	u32     dcfg_fusesr;    /* Fuse status register */
+	u8      res_02c[0x70-0x2c];
+	u32     devdisr;        /* Device disable control */
+	u32     devdisr2;       /* Device disable control 2 */
+	u32     devdisr3;       /* Device disable control 3 */
+	u32     devdisr4;       /* Device disable control 4 */
+	u32     devdisr5;       /* Device disable control 5 */
+	u8      res_084[0x94-0x84];
+	u32     coredisru;      /* uppper portion for support of 64 cores */
+	u32     coredisrl;      /* lower portion for support of 64 cores */
+	u8      res_09c[0xa4-0x9c];
+	u32     svr;            /* System version */
+	u8	res_0a8[0xb0-0xa8];
+	u32	rstcr;		/* Reset control */
+	u32	rstrqpblsr;	/* Reset request preboot loader status */
+	u8	res_0b8[0xc0-0xb8];
+	u32	rstrqmr1;	/* Reset request mask */
+	u8	res_0c4[0xc8-0xc4];
+	u32	rstrqsr1;	/* Reset request status */
+	u8	res_0cc[0xd4-0xcc];
+	u32	rstrqwdtmrl;	/* Reset request WDT mask */
+	u8	res_0d8[0xdc-0xd8];
+	u32	rstrqwdtsrl;	/* Reset request WDT status */
+	u8	res_0e0[0xe4-0xe0];
+	u32	brrl;		/* Boot release */
+	u8      res_0e8[0x100-0xe8];
+	u32     rcwsr[16];      /* Reset control word status */
+	u8      res_140[0x200-0x140];
+	u32     scratchrw[4];  /* Scratch Read/Write */
+	u8      res_210[0x300-0x210];
+	u32     scratchw1r[4];  /* Scratch Read (Write once) */
+	u8      res_310[0x400-0x310];
+	u32	crstsr;
+	u8      res_404[0x550-0x404];
+	u32	sataliodnr;
+	u8	res_554[0x604-0x554];
+	u32	pamubypenr;
+	u32	dmacr1;
+	u8      res_60c[0x740-0x60c];   /* add more registers when needed */
+	u32     tp_ityp[64];    /* Topology Initiator Type Register */
+	struct {
+		u32     upper;
+		u32     lower;
+	} tp_cluster[1];        /* Core Cluster n Topology Register */
+	u8	res_848[0xe60-0x848];
+	u32	ddrclkdr;
+	u8	res_e60[0xe68-0xe64];
+	u32	ifcclkdr;
+	u8	res_e68[0xe80-0xe6c];
+	u32	sdhcpcr;
+};
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+	u32 dpslpcr;
+	u32 resv0[2];
+	u32 etsecclkdpslpcr;
+	u32 resv1[5];
+	u32 fuseovrdcr;
+	u32 pixclkcr;
+	u32 resv2[5];
+	u32 spimsicr;
+	u32 resv3[6];
+	u32 pex1pmwrcr;
+	u32 pex1pmrdsr;
+	u32 resv4[3];
+	u32 usb3prm1cr;
+	u32 usb4prm2cr;
+	u32 pex1rdmsgpldlsbsr;
+	u32 pex1rdmsgpldmsbsr;
+	u32 pex2rdmsgpldlsbsr;
+	u32 pex2rdmsgpldmsbsr;
+	u32 pex1rdmmsgrqsr;
+	u32 pex2rdmmsgrqsr;
+	u32 spimsiclrcr;
+	u32 pex1mscportsr;
+	u32 pex2mscportsr;
+	u32 pex2pmwrcr;
+	u32 resv5[24];
+	u32 mac1_streamid;
+	u32 mac2_streamid;
+	u32 mac3_streamid;
+	u32 pex1_streamid;
+	u32 pex2_streamid;
+	u32 dma_streamid;
+	u32 sata_streamid;
+	u32 usb3_streamid;
+	u32 qe_streamid;
+	u32 sdhc_streamid;
+	u32 adma_streamid;
+	u32 letechsftrstcr;
+	u32 core0_sft_rst;
+	u32 core1_sft_rst;
+	u32 resv6[1];
+	u32 usb_hi_addr;
+	u32 etsecclkadjcr;
+	u32 sai_clk;
+	u32 resv7[1];
+	u32 dcu_streamid;
+	u32 usb2_streamid;
+	u32 ftm_reset;
+	u32 altcbar;
+	u32 qspi_cfg;
+	u32 pmcintecr;
+	u32 pmcintlecr;
+	u32 pmcintsr;
+	u32 qos1;
+	u32 qos2;
+	u32 qos3;
+	u32 cci_cfg;
+	u32 resv8[1];
+	u32 etsecdmamcr;
+	u32 usb3prm3cr;
+	u32 resv9[1];
+	u32 debug_streamid;
+	u32 resv10[5];
+	u32 snpcnfgcr;
+	u32 resv11[1];
+	u32 intpcr;
+	u32 resv12[20];
+	u32 scfgrevcr;
+	u32 coresrencr;
+	u32 pex2pmrdsr;
+	u32 ddrc1cr;
+	u32 ddrc2cr;
+	u32 ddrc3cr;
+	u32 ddrc4cr;
+	u32 ddrgcr;
+	u32 resv13[120];
+	u32 qeioclkcr;
+	u32 etsecmcr;
+	u32 sdhciovserlcr;
+	u32 resv14[61];
+	u32 sparecr;
+};
+
+/* Clocking */
+struct ccsr_clk {
+	struct {
+		u32 clkcncsr;	/* core cluster n clock control status */
+		u8  res_004[0x1c];
+	} clkcsr[2];
+	u8	res_040[0x7c0]; /* 0x100 */
+	struct {
+		u32 pllcngsr;
+		u8 res_804[0x1c];
+	} pllcgsr[2];
+	u8	res_840[0x1c0];
+	u32	clkpcsr;	/* 0xa00 Platform clock domain control/status */
+	u8	res_a04[0x1fc];
+	u32	pllpgsr;	/* 0xc00 Platform PLL General Status */
+	u8	res_c04[0x1c];
+	u32	plldgsr;	/* 0xc20 DDR PLL General Status */
+	u8	res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+	u32 cntcr;
+	u32 cntsr;
+	u32 cntcv1;
+	u32 cntcv2;
+	u32 resv1[4];
+	u32 cntfid0;
+	u32 cntfid1;
+	u32 resv2[1002];
+	u32 counterid[12];
+};
+
+#define MAX_SERDES			1
+#define SRDS_MAX_LANES			4
+#define SRDS_MAX_BANK			2
+
+#define SRDS_RSTCTL_RST			0x80000000
+#define SRDS_RSTCTL_RSTDONE		0x40000000
+#define SRDS_RSTCTL_RSTERR		0x20000000
+#define SRDS_RSTCTL_SWRST		0x10000000
+#define SRDS_RSTCTL_SDEN		0x00000020
+#define SRDS_RSTCTL_SDRST_B		0x00000040
+#define SRDS_RSTCTL_PLLRST_B		0x00000080
+#define SRDS_PLLCR0_POFF		0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK	0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13	0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88	0x50000000
+#define SRDS_PLLCR0_PLL_LCK		0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK	0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5		0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75	0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15	0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4		0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12	0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3		0x000a0000
+#define SRDS_PLLCR1_PLL_BWSEL		0x08000000
+
+struct ccsr_serdes {
+	struct {
+		u32	rstctl;	/* Reset Control Register */
+
+		u32	pllcr0; /* PLL Control Register 0 */
+
+		u32	pllcr1; /* PLL Control Register 1 */
+		u32	res_0c;	/* 0x00c */
+		u32	pllcr3;
+		u32	pllcr4;
+		u8	res_18[0x20-0x18];
+	} bank[2];
+	u8	res_40[0x90-0x40];
+	u32	srdstcalcr;	/* 0x90 TX Calibration Control */
+	u8	res_94[0xa0-0x94];
+	u32	srdsrcalcr;	/* 0xa0 RX Calibration Control */
+	u8	res_a4[0xb0-0xa4];
+	u32	srdsgr0;	/* 0xb0 General Register 0 */
+	u8	res_b4[0xe0-0xb4];
+	u32	srdspccr0;	/* 0xe0 Protocol Converter Config 0 */
+	u32	srdspccr1;	/* 0xe4 Protocol Converter Config 1 */
+	u32	srdspccr2;	/* 0xe8 Protocol Converter Config 2 */
+	u32	srdspccr3;	/* 0xec Protocol Converter Config 3 */
+	u32	srdspccr4;	/* 0xf0 Protocol Converter Config 4 */
+	u8	res_f4[0x100-0xf4];
+	struct {
+		u32	lnpssr;	/* 0x100, 0x120, ..., 0x1e0 */
+		u8	res_104[0x120-0x104];
+	} srdslnpssr[4];
+	u8	res_180[0x300-0x180];
+	u32	srdspexeqcr;
+	u32	srdspexeqpcr[11];
+	u8	res_330[0x400-0x330];
+	u32	srdspexapcr;
+	u8	res_404[0x440-0x404];
+	u32	srdspexbpcr;
+	u8	res_444[0x800-0x444];
+	struct {
+		u32	gcr0;	/* 0x800 General Control Register 0 */
+		u32	gcr1;	/* 0x804 General Control Register 1 */
+		u32	gcr2;	/* 0x808 General Control Register 2 */
+		u32	sscr0;
+		u32	recr0;	/* 0x810 Receive Equalization Control */
+		u32	recr1;
+		u32	tecr0;	/* 0x818 Transmit Equalization Control */
+		u32	sscr1;
+		u32	ttlcr0;	/* 0x820 Transition Tracking Loop Ctrl 0 */
+		u8	res_824[0x83c-0x824];
+		u32	tcsr3;
+	} lane[4];	/* Lane A, B, C, D, E, F, G, H */
+	u8	res_a00[0x1000-0xa00];	/* from 0xa00 to 0xfff */
+};
+
+/* DDR memory controller registers */
+struct ccsr_ddr {
+	u32 cs0_bnds;			/* Chip Select 0 Memory Bounds */
+	u32 resv1[1];
+	u32 cs1_bnds;			/* Chip Select 1 Memory Bounds */
+	u32 resv2[1];
+	u32 cs2_bnds;			/* Chip Select 2 Memory Bounds */
+	u32 resv3[1];
+	u32 cs3_bnds;			/* Chip Select 3 Memory Bounds */
+	u32 resv4[25];
+	u32 cs0_config;			/* Chip Select Configuration */
+	u32 cs1_config;			/* Chip Select Configuration */
+	u32 cs2_config;			/* Chip Select Configuration */
+	u32 cs3_config;			/* Chip Select Configuration */
+	u32 resv5[12];
+	u32 cs0_config_2;		/* Chip Select Configuration 2 */
+	u32 cs1_config_2;		/* Chip Select Configuration 2 */
+	u32 cs2_config_2;		/* Chip Select Configuration 2 */
+	u32 cs3_config_2;		/* Chip Select Configuration 2 */
+	u32 resv6[12];
+	u32 timing_cfg_3;		/* SDRAM Timing Configuration 3 */
+	u32 timing_cfg_0;		/* SDRAM Timing Configuration 0 */
+	u32 timing_cfg_1;		/* SDRAM Timing Configuration 1 */
+	u32 timing_cfg_2;		/* SDRAM Timing Configuration 2 */
+	u32 sdram_cfg;			/* SDRAM Control Configuration */
+	u32 sdram_cfg_2;		/* SDRAM Control Configuration 2 */
+	u32 sdram_mode;			/* SDRAM Mode Configuration */
+	u32 sdram_mode_2;		/* SDRAM Mode Configuration 2 */
+	u32 sdram_md_cntl;		/* SDRAM Mode Control */
+	u32 sdram_interval;		/* SDRAM Interval Configuration */
+	u32 sdram_data_init;		/* SDRAM Data initialization */
+	u32 resv7[1];
+	u32 sdram_clk_cntl;		/* SDRAM Clock Control */
+	u32 resv8[5];
+	u32 init_addr;			/* training init addr */
+	u32 init_ext_addr;		/* training init extended addr */
+	u32 resv9[4];
+	u32 timing_cfg_4;		/* SDRAM Timing Configuration 4 */
+	u32 timing_cfg_5;		/* SDRAM Timing Configuration 5 */
+	u32 timing_cfg_6;		/* SDRAM Timing Configuration 6 */
+	u32 timing_cfg_7;		/* SDRAM Timing Configuration 7 */
+	u32 ddr_zq_cntl;		/* ZQ calibration control*/
+	u32 ddr_wrlvl_cntl;		/* write leveling control*/
+	u32 resv10[1];
+	u32 ddr_sr_cntr;		/* self refresvh counter */
+	u32 ddr_sdram_rcw_1;		/* Control Words 1 */
+	u32 ddr_sdram_rcw_2;		/* Control Words 2 */
+	u32 resv11[2];
+	u32 ddr_wrlvl_cntl_2;		/* write leveling control 2 */
+	u32 ddr_wrlvl_cntl_3;		/* write leveling control 3 */
+	u32 resv12[2];
+	u32 ddr_sdram_rcw_3;		/* Control Words 3 */
+	u32 ddr_sdram_rcw_4;		/* Control Words 4 */
+	u32 ddr_sdram_rcw_5;		/* Control Words 5 */
+	u32 ddr_sdram_rcw_6;		/* Control Words 6 */
+	u32 resv13[20];
+	u32 sdram_mode_3;		/* SDRAM Mode Configuration 3 */
+	u32 sdram_mode_4;		/* SDRAM Mode Configuration 4 */
+	u32 sdram_mode_5;		/* SDRAM Mode Configuration 5 */
+	u32 sdram_mode_6;		/* SDRAM Mode Configuration 6 */
+	u32 sdram_mode_7;		/* SDRAM Mode Configuration 7 */
+	u32 sdram_mode_8;		/* SDRAM Mode Configuration 8 */
+	u32 sdram_mode_9;		/* SDRAM Mode Configuration 9 */
+	u32 sdram_mode_10;		/* SDRAM Mode Configuration 10 */
+	u32 sdram_mode_11;		/* SDRAM Mode Configuration 11 */
+	u32 sdram_mode_12;		/* SDRAM Mode Configuration 12 */
+	u32 sdram_mode_13;		/* SDRAM Mode Configuration 13 */
+	u32 sdram_mode_14;		/* SDRAM Mode Configuration 14 */
+	u32 sdram_mode_15;		/* SDRAM Mode Configuration 15 */
+	u32 sdram_mode_16;		/* SDRAM Mode Configuration 16 */
+	u32 resv14[4];
+	u32 timing_cfg_8;		/* SDRAM Timing Configuration 8 */
+	u32 timing_cfg_9;		/* SDRAM Timing Configuration 9 */
+	u32 resv15[2];
+	u32 sdram_cfg_3;		/* SDRAM Control Configuration 3 */
+	u32 resv16[15];
+	u32 deskew_cntl;		/* SDRAM Deskew Control */
+	u32 resv17[545];
+	u32 ddr_dsr1;			/* Debug Status 1 */
+	u32 ddr_dsr2;			/* Debug Status 2 */
+	u32 ddr_cdr1;			/* Control Driver 1 */
+	u32 ddr_cdr2;			/* Control Driver 2 */
+	u32 resv18[50];
+	u32 ip_rev1;			/* IP Block Revision 1 */
+	u32 ip_rev2;			/* IP Block Revision 2 */
+	u32 eor;			/* Enhanced Optimization Register */
+	u32 resv19[63];
+	u32 mtcr;			/* Memory Test Control Register */
+	u32 resv20[7];
+	u32 mtp1;			/* Memory Test Pattern 1 */
+	u32 mtp2;			/* Memory Test Pattern 2 */
+	u32 mtp3;			/* Memory Test Pattern 3 */
+	u32 mtp4;			/* Memory Test Pattern 4 */
+	u32 mtp5;			/* Memory Test Pattern 5 */
+	u32 mtp6;			/* Memory Test Pattern 6 */
+	u32 mtp7;			/* Memory Test Pattern 7 */
+	u32 mtp8;			/* Memory Test Pattern 8 */
+	u32 mtp9;			/* Memory Test Pattern 9 */
+	u32 mtp10;			/* Memory Test Pattern 10 */
+	u32 resv21[6];
+	u32 ddr_mt_st_ext_addr;		/* Memory Test Start Extended Address */
+	u32 ddr_mt_st_addr;		/* Memory Test Start Address */
+	u32 ddr_mt_end_ext_addr;	/* Memory Test End Extended Address */
+	u32 ddr_mt_end_addr;		/* Memory Test End Address */
+	u32 resv22[36];
+	u32 data_err_inject_hi;		/* Data Path Err Injection Mask High */
+	u32 data_err_inject_lo;		/* Data Path Err Injection Mask Low */
+	u32 ecc_err_inject;		/* Data Path Err Injection Mask ECC */
+	u32 resv23[5];
+	u32 capture_data_hi;		/* Data Path Read Capture High */
+	u32 capture_data_lo;		/* Data Path Read Capture Low */
+	u32 capture_ecc;		/* Data Path Read Capture ECC */
+	u32 resv24[5];
+	u32 err_detect;			/* Error Detect */
+	u32 err_disable;		/* Error Disable */
+	u32 err_int_en;
+	u32 capture_attributes;		/* Error Attrs Capture */
+	u32 capture_address;		/* Error Addr Capture */
+	u32 capture_ext_address;	/* Error Extended Addr Capture */
+	u32 err_sbe;			/* Single-Bit ECC Error Management */
+	u32 resv25[105];
+};
+
+/* CCI-400 registers */
+struct ccsr_cci400 {
+	u32 ctrl_ord;			/* Control Override */
+	u32 spec_ctrl;			/* Speculation Control */
+	u32 secure_access;		/* Secure Access */
+	u32 status;			/* Status */
+	u32 impr_err;			/* Imprecise Error */
+	u8 res_14[0x100 - 0x14];
+	u32 pmcr;			/* Performance Monitor Control */
+	u8 res_104[0xfd0 - 0x104];
+	u32 pid[8];			/* Peripheral ID */
+	u32 cid[4];			/* Component ID */
+	struct {
+		u32 snoop_ctrl;		/* Snoop Control */
+		u32 sha_ord;		/* Shareable Override */
+		u8 res_1008[0x1100 - 0x1008];
+		u32 rc_qos_ord;		/* read channel QoS Value Override */
+		u32 wc_qos_ord;		/* read channel QoS Value Override */
+		u8 res_1108[0x110c - 0x1108];
+		u32 qos_ctrl;		/* QoS Control */
+		u32 max_ot;		/* Max OT */
+		u8 res_1114[0x1130 - 0x1114];
+		u32 target_lat;		/* Target Latency */
+		u32 latency_regu;	/* Latency Regulation */
+		u32 qos_range;		/* QoS Range */
+		u8 res_113c[0x2000 - 0x113c];
+	} slave[5];			/* Slave Interface */
+	u8 res_6000[0x9004 - 0x6000];
+	u32 cycle_counter;		/* Cycle counter */
+	u32 count_ctrl;			/* Count Control */
+	u32 overflow_status;		/* Overflow Flag Status */
+	u8 res_9010[0xa000 - 0x9010];
+	struct {
+		u32 event_select;	/* Event Select */
+		u32 event_count;	/* Event Count */
+		u32 counter_ctrl;	/* Counter Control */
+		u32 overflow_status;	/* Overflow Flag Status */
+		u8 res_a010[0xb000 - 0xa010];
+	} pcounter[4];			/* Performance Counter */
+	u8 res_e004[0x10000 - 0xe004];
+};
+#endif	/* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
new file mode 100644
index 0000000..f9cd75b
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define I2C_QUIRK_REG	/* enable 8-bit driver */
+
+#ifdef CONFIG_LPUART_32B_REG
+struct lpuart_fsl {
+	u32 baud;
+	u32 stat;
+	u32 ctrl;
+	u32 data;
+	u32 match;
+	u32 modir;
+	u32 fifo;
+	u32 water;
+};
+#else
+struct lpuart_fsl {
+	u8 ubdh;
+	u8 ubdl;
+	u8 uc1;
+	u8 uc2;
+	u8 us1;
+	u8 us2;
+	u8 uc3;
+	u8 ud;
+	u8 uma1;
+	u8 uma2;
+	u8 uc4;
+	u8 uc5;
+	u8 ued;
+	u8 umodem;
+	u8 uir;
+	u8 reserved;
+	u8 upfifo;
+	u8 ucfifo;
+	u8 usfifo;
+	u8 utwfifo;
+	u8 utcfifo;
+	u8 urwfifo;
+	u8 urcfifo;
+	u8 rsvd[28];
+};
+#endif
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 5f2a5f4..2f1e0a1 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -23,4 +23,8 @@
 #include <asm/arch-fsl-lsch3/config.h>
 #endif
 
+#ifdef CONFIG_LS102xA
+#include <asm/arch/config.h>
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 6d18eb3..e60ed73 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -376,7 +376,12 @@ out:
 	return retval;
 }
 
-#elif !defined(readb)
+#else
+#define memset_io(a, b, c)		memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c)		memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)		memcpy((void *)(a), (b), (c))
+
+#if !defined(readb)
 
 #define readb(addr)			(__readwrite_bug("readb"),0)
 #define readw(addr)			(__readwrite_bug("readw"),0)
@@ -389,6 +394,7 @@ out:
 
 #define check_signature(io,sig,len)	(0)
 
+#endif
 #endif	/* __mem_pci */
 
 /*
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0276a10..1dc0f5a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -7,7 +7,7 @@
 
 obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
 obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
-ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610))
+ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa))
 obj-y += imx_watchdog.o
 endif
 obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
-- 
1.8.4



More information about the U-Boot mailing list