[U-Boot] [PATCH v5] arm: ls102xa: Add NAND boot support for LS1021AQDS board

[York Sun]

On 12/09/2014 01:38 AM, Alison Wang wrote:
> This patch adds NAND boot support for LS1021AQDS board. SPL
> framework is used. PBL initialize the internal RAM and copy
> SPL to it, then SPL initialize DDR using SPD and copy u-boot
> from NAND flash to DDR, finally SPL transfer control to u-boot.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> ---
> Change log:
>  v2: Rebase the patch.
>      Add CONFIG_SYS_DCSR_DCFG_ADDR instead of CONFIG_SYS_DCSRBAR.
> 

Applied to u-boot-fsl-qoriq master, awaiting upstream.

York