[U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata

[Alexander Graf]

On 02.03.16 00:23, Adam Ford wrote:
> A few boards still use ns16550_platdata structures, but assume the structure
> is going to be in a specific order. By explicitly naming each entry,
> this should also help 'future-proof' in the event the structure changes.
> 
> Tested on the Logic PD Torpedo + Wireless.
> 
> I only changed a handful of devices that used the same syntax as the Logic
> board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
> and Alexander Graf.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> 
> V4: Fix subject heading
> 
> V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
> it did exist, it would get initialized to 0 by default.
> 
> V2: I hastily copy-pasted the boards without looking at the UART number.
> This addresses 3 boards that use UART3 and not UART1.
> ---
>  board/isee/igep00x0/igep00x0.c      | 6 +++---
>  board/logicpd/omap3som/omap3logic.c | 6 +++---
>  board/logicpd/zoom1/zoom1.c         | 6 +++---
>  board/overo/overo.c                 | 6 +++---
>  board/quipos/cairo/cairo.c          | 6 +++---
>  board/ti/beagle/beagle.c            | 6 +++---
>  board/timll/devkit8000/devkit8000.c | 6 +++---

Looks to me like you didn't catch all boards out there. I don't think it
makes sense to limit yourself to OMAP3, otherwise different boards (that
people may not realize are broken that fast) break next time...

arch/arm/cpu/arm926ejs/lpc32xx/devices.c
arch/arm/cpu/armv7/am33xx/board.c
arch/arm/mach-tegra/board.c
board/isee/igep00x0/igep00x0.c
board/lge/sniper/sniper.c
board/logicpd/omap3som/omap3logic.c
board/logicpd/zoom1/zoom1.c
board/overo/overo.c
board/quipos/cairo/cairo.c
board/ti/beagle/beagle.c
board/timll/devkit8000/devkit8000.c


Alex