[U-Boot] Pull request: u-boot-spi/sunxi

[Hans de Goede]

Hi,

On 24-11-16 15:55, Maxime Ripard wrote:
> On Thu, Nov 24, 2016 at 08:05:55PM +0530, Jagan Teki wrote:
>> Hi Tom,
>>
>> These are the pending patches, from u-boot-sunxi/next.
>>
>> Will send sunxi PR on top of u-boot-sunxi repo once I get the access,
>> meanwhile please take this PR.
>>
>> Hans, Let me know if I miss any patches from next.
>>
>> thanks!
>> Jagan.
>>
>> The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:
>>
>>   colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)
>>
>> are available in the git repository at:
>>
>>   git://git.denx.de/u-boot-spi.git sunxi
>>
>> for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:
>>
>>   nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)
>>
>> ----------------------------------------------------------------
>> Boris Brezillon (1):
>>       mtd: nand: add support for the TC58NVG2S0H chip
>>
>> Chen-Yu Tsai (9):
>>       ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
>>       sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
>>       sunxi: Add base address of secure SRAM B for sun9i/A80
>>       sunxi: Use secure SRAM B for secure RAM for sun9i/A80
>>       sunxi: Add PRCM register definition for sun9i/A80
>>       sunxi: Add CPUCFG register definitions for sun9i/A80
>>       sunxi: Add support for TZPC on sun9i/A80
>>       sunxi: Add basic PSCI implementation for A80
>>       sunxi: Enable PSCI on sun9i/A80
>>
>> Emmanuel Vadot (1):
>>       sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
>>
>> Hans de Goede (1):
>>       sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
>>
>> Jelle van der Waa (1):
>>       sunxi: Use the available Kconfig option for AHCI
>>
>> Marcel Ziswiler (1):
>>       colibri_pxa270: transition to driver model for serial
>>
>> Maxime Ripard (3):
>>       sunxi: Sync GR8 DTS and AXP209 with the kernel
>>       tools: sunxi: Add spl image builder
>>       nand: sunxi: Add options for the SPL NAND configuration
>
> Hmmm, I'm not sure why it's in though.
>
> I sent an update version of those since the first iteration had
> issues.

Probably my bad, I put this in u-boot-sunxi/next before I stepped
down as maintainer. Which of these 3 patches need to be dropped
exactly?

Otherwise this pull-req looks good. Jagan, thank you for your
work on this!

Regards,

Hans