[U-Boot] Pull request: u-boot-spi/sunxi

Maxime Ripard maxime.ripard at free-electrons.com
Thu Nov 24 15:55:09 CET 2016


On Thu, Nov 24, 2016 at 08:05:55PM +0530, Jagan Teki wrote:
> Hi Tom,
> 
> These are the pending patches, from u-boot-sunxi/next.
> 
> Will send sunxi PR on top of u-boot-sunxi repo once I get the access, 
> meanwhile please take this PR.
> 
> Hans, Let me know if I miss any patches from next.
> 
> thanks!
> Jagan.
> 
> The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:
> 
>   colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-spi.git sunxi
> 
> for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:
> 
>   nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)
> 
> ----------------------------------------------------------------
> Boris Brezillon (1):
>       mtd: nand: add support for the TC58NVG2S0H chip
> 
> Chen-Yu Tsai (9):
>       ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
>       sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
>       sunxi: Add base address of secure SRAM B for sun9i/A80
>       sunxi: Use secure SRAM B for secure RAM for sun9i/A80
>       sunxi: Add PRCM register definition for sun9i/A80
>       sunxi: Add CPUCFG register definitions for sun9i/A80
>       sunxi: Add support for TZPC on sun9i/A80
>       sunxi: Add basic PSCI implementation for A80
>       sunxi: Enable PSCI on sun9i/A80
> 
> Emmanuel Vadot (1):
>       sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
> 
> Hans de Goede (1):
>       sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
> 
> Jelle van der Waa (1):
>       sunxi: Use the available Kconfig option for AHCI
> 
> Marcel Ziswiler (1):
>       colibri_pxa270: transition to driver model for serial
> 
> Maxime Ripard (3):
>       sunxi: Sync GR8 DTS and AXP209 with the kernel
>       tools: sunxi: Add spl image builder
>       nand: sunxi: Add options for the SPL NAND configuration

Hmmm, I'm not sure why it's in though.

I sent an update version of those since the first iteration had
issues.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161124/ece82f6f/attachment.sig>


More information about the U-Boot mailing list