[ELDK] Serial console on Lite5200

Stefano Babic sbabic at denx.de
Wed Sep 10 22:23:00 CEST 2008

Chuan Neng Lee wrote:
 When that worked, I then uncommented the
> kernel's lite5200b.dts section for serial at 2600 (PSC4), thinking
> that would do it.  However, it is not sufficient.  What am I
> missing?

Probably you have to change the port configuration register in
lite5200.c (I supposed you use it). In the Lite5200b board PSC4 is used
as USB host and you have to change the pin multiplexer to route the pins
to the UART.

I hope this can help,


DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

More information about the eldk mailing list