[ELDK] how to use u-boot command to diagnose pci dma

[Wolfgang Denk]

Dear linuxdemo,

how about using a realname?

In message <23963529.413851231375571790.JavaMail.coremail at bj126app57.126.com> you wrote:
>
> I made a pci card for a board based on ppc405ep,and I want to test the card's
> dma function, so which u-boot command  can be used to diagnose DMA function
> of the pci card ?

This question is off topic here. U-Boot related questions should be
sent to the U-Boot mailing list, but this is not an U-Boot question
either - U-Boot provides low level commands which can be used to test"
things including PCI - for example, you can use "mw" and "md" commands
ro write to and read from PCI addresses, but actual testing of PCI
devices is beyond the scope of the normal ML traffic.

> >Send eldk mailing list submissions to
> >	eldk at lists.denx.de
...
> >Today's Topics:
> >
> >   1. Re: Building tcpdump package in eldk 4.1 (Wolfgang Denk)
> >   2. Rebuilding the crosstool rpm on SL5 (Dach Miroslaw)
> >   3. Re: Rebuilding the crosstool rpm on SL5 (Wolfgang Denk)
> >   4. Building  Target packages in eldk 4.1 (Matheos Worku)
> >   5. Re: Building tcpdump package in eldk 4.1 (Matheos Worku)
> >   6. Re: Building Target packages in eldk 4.1 (Wolfgang Denk)

Please NEVER create a message by replying to an existing one, as this
completely corrpts message threading.

Also, it is an offence to full quote unrelated text.

Please read http://www.netmeister.org/news/learn2quote.html  and
http://catb.org/esr/faqs/smart-questions.html

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
In an organization, each person rises to the level of his own  incom-
petency                                         - The Peter Principle