[ELDK] PPC 405EX ethernet in MII mode instead of RGMII?

[Wolfgang Denk]

Dear Nathan French,

In message <1241549606.3241.524.camel at localhost.localdomain> you wrote:
> I'm bringing up a board that is similar to a Kilauea/Halakea but with a
> NatSemi DP83640 ethernet phy.  We've wired the phy up for MII mode and
> have it working with U-Boot after some slight modifications to U-Boot
> (setting the phy address and MII mode for EMAC0).

You probably want to post this on the ppc mailing list; your
question is actually not ELDK related.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
On the subject of C program indentation: "In My Egotistical  Opinion,
most  people's  C  programs  should be indented six feet downward and
covered with dirt."                               - Blair P. Houghton