[ELDK] Building uImage with latest kernel
Jonathan Haws
Jonathan.Haws at sdl.usu.edu
Mon Aug 30 16:54:55 CEST 2010
I just did a git pull on the linux-2.6-denx repository and am having
the same results. I believe I should be at 2.6.36-rc3. Is there a way
I can tell by looking at my source?
Thanks,
Jonathan
--
Jonathan R. Haws
Electrical Engineer
Space Dynamics Laboratory
(435) 797-4629
jhaws at sdl.usu.edu
________________________________________
From: Jonathan Haws
Sent: Monday, August 30, 2010 8:42 AM
To: Anatolij Gustschin
Cc: eldk at lists.denx.de
Subject: RE: [ELDK] Building uImage with latest kernel
Awesome. Good to know. I will update and go from there.
Thanks.
Jonathan
--
Jonathan R. Haws
Electrical Engineer
Space Dynamics Laboratory
(435) 797-4629
jhaws at sdl.usu.edu
________________________________________
From: Anatolij Gustschin [agust at denx.de]
Sent: Monday, August 30, 2010 8:37 AM
To: Jonathan Haws
Cc: eldk at lists.denx.de
Subject: Re: [ELDK] Building uImage with latest kernel
Hi Jonathan,
On Mon, 30 Aug 2010 14:25:03 +0000
Jonathan Haws <Jonathan.Haws at sdl.usu.edu> wrote:
> I checked out the latest kernel last week (2.6.36-rc2) and was trying to build
> an image for booting with U-Boot. However, the normal uImage target is
> apparently no longer available. The default zImage builds just fine. Here
> is the command output:
>
> jhaws at e14998 ~/svn/duster/EmbeddedLinux/linux-2.6 $ make ARCH=
> powerpc CROSS_COMPILE=ppc_4xx- uImage
> make: *** No rule to make target `uImage'. Stop.
>
> Is my ELDK installation broken? Do I need to update it or reinstall it? I
> doubt that is the case because the older kernel I have checked out is
> building just fine.
This is a known bug and it has been fixed in 2.6.36-rc3. You do not
need to update ELDK, just update to the latest kernel source.
Best regards,
Anatolij
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
More information about the eldk
mailing list