[ELDK] building u-boot

Érico Porto ericoporto2008 at gmail.com
Tue Dec 27 17:05:53 CET 2011


You are right! It works flawless now using the real v2011.12 !

Thanks!

Érico V. Porto


On Tue, Dec 27, 2011 at 1:14 PM, Anatolij Gustschin <agust at denx.de> wrote:

> Hi,
>
> First, please do not top-post. Thanks!
>
> On Tue, 27 Dec 2011 12:55:17 -0200
> Érico Porto <ericoporto2008 at gmail.com> wrote:
>
> > did a
> >
> > erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make clean
> > erico at 050278:~/Downloads/u-boot-2011.12-rc3$ source
> > /opt/eldk-5.1/powerpc-softfloat/environment-setup-powerpc-nf-linux
> > erico at 050278:~/Downloads/u-boot-2011.12-rc3$ export
> > CROSS_COMPILE=powerpc-linux-
> > erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make mpc832xemds_config
> > Configuring for MPC832XEMDS board...
> > erico at 050278:~/Downloads/u-boot-2011.12-rc3$ make all
> >
> > still getting
> >
> > make[1]: Entering directory
> > `/home/erico/Downloads/u-boot-2011.12-rc3/common'
> > make[1]: *** No rule to make target
> > `/home/erico/Downloads/u-boot-2011.12-rc3/include/asm/system.h', Needed
> by
> > `cmd_bdinfo.o'.  Stop.
> > make[1]: Leaving directory
> `/home/erico/Downloads/u-boot-2011.12-rc3/common'
> > make: ** [common/libcommon.o] Error 2
>
> Hm, it builds without issues here, both U-Boot v2011.12-rc3 and
> v2011.12. Seems something is wrong with your U-Boot source. Why are
> you using v2011.12-rc3? Can you please try using v2011.12 which has
> been released last week [1].
>
> Best regards,
> Anatolij
>
> [1] ftp://ftp.denx.de/pub/u-boot/u-boot-2011.12.tar.bz2
>


More information about the eldk mailing list