[ELDK] MPC8306 support

[Wolfgang Denk]

Dear Murat Artun,

In message <AANLkTikBNK2_5Pp3vpDaYJDib4O1QGVginW-H49i0Gw0 at mail.gmail.com> you wrote:
> Is there a plan about ELDK suppor for MPC8306?

I'm not sure what exactly you want to know - there are two aspects to
support some specific processor architecture:

- Support in the development tool chain (i. e. cross compiler, native
  tools, libraries): here you can yuse the existing code, nothing new
  needs to be added

- Support for the processor and especially your board in the boot
  loader (U-Boot) and the OS (Linux) running on the board: this is
  independent of the ELDK, i. e. youc an use any U-Boot and/or Linux
  kernel source tree that has board support for your hardware
  (sometimes called a "BSP") included.  Again, nothing needs to be
  added to the ELDK.

So there are no plans to change anything to support he MPC8306,
because no changes are required.

[There is, on the other hand, work going on for ELDK 5.0, but that is
a different story.]

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
1000 pains                                              = 1 Megahertz