[ELDK] 答复: help: i got a core dumped while building u-boot-2011.06 use eldk5.0 for armv4t.

[liujun]

ELDK-5.0 supports armv7 and armv5t - I do not know if someone else
except you tested with v4t...

I known eldk-5.0 supports v7 and v5t, I see a denx faq which said can
do this with pre-setting USE_PRIVATE_LIBGCC=yes, I do it, then core dumped
happened.
that faq link is:
http://www.denx.de/wiki/view/ELDK-5/QuestionsAndAnswers#GCC_generates_illega
l_opcodes_fo

maybe I can try a older version of eldk, I'd like to try eldk-5.0 firstly, 
I'v downloaded and installed 5.0 already and it work well under my test.

I think eldk-5.0 maybe backward compatible before.

Thanks for your reply.

Best regards,
liujun

-----邮件原件-----
发件人: Stefano Babic [mailto:sbabic at denx.de] 
发送时间: 2011-10-08 20:30
收件人: liujun
抄送: eldk at lists.denx.de
主题: Re: [ELDK] help: i got a core dumped while building u-boot-2011.06 use
eldk5.0 for armv4t.

On 10/08/2011 10:40 AM, liujun wrote:
> hi, all
> 
> i got a core dumped while building u-boot-2011.06 for s3c2440a chip 
> 
> which is arch v4t use eldk5.0 with USE_PRIVATE_LIBGCC=yes.
> 
> building is ok without USE_PRIVATE_LIBGCC=yes but only got a v5t 
> 
> elf u-boot file.
> 


Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================