[ELDK] U-boot fails to load in QEMU

[Wolfgang Denk]

Dear Sarbojit Ganguly,

In message <CAP2rAF93aj5EkkSZ9s3E5JdaHBtzvxcLrboqm_XYMEOHm9H3fQ at mail.gmail.com> you wrote:
> 
> I compiled u-boot12012.04 for QEMU (emulating versatilepb arm926ej-s).
> 
> make versatilepb_config ARCH=arm CROSS_COMPILE=arm-none-eabi-
> make all ARM=arm CROSS_COMPILE=arm-none-eabi-
> 
> and ran qemu by the following command:
> 
> qemu-system-arm -M versatilepb -m 128M -nographic -kernel ./u-boot.bin
> 
> Output:
> 
> qemu: fatal: Trying to execute code outside RAM or ROM at 0xffff07bc

I cannot see how this problem would be related to the ELDK, so I think
you are off topic here.

You can get much better help for U-Boot related issues when posting on
the appropriate mailing list (which in this case is the U-Boot mailing
list).

Thanks.

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The more we disagree, the more chance there is that at least  one  of
us is right.