[ELDK] U-boot fails to load in QEMU

[Sarbojit Ganguly]

Dear Wolfgang, Stefano,

Sorry, about posting it on wrong mailing list. My apologies.

Stefano, I did not know _that_ make command, thank you for guiding me.


On 19 June 2012 12:53, Wolfgang Denk <wd at denx.de> wrote:
> Dear Sarbojit Ganguly,
>
> In message <CAP2rAF93aj5EkkSZ9s3E5JdaHBtzvxcLrboqm_XYMEOHm9H3fQ at mail.gmail.com> you wrote:
>>
>> I compiled u-boot12012.04 for QEMU (emulating versatilepb arm926ej-s).
>>
>> make versatilepb_config ARCH=arm CROSS_COMPILE=arm-none-eabi-
>> make all ARM=arm CROSS_COMPILE=arm-none-eabi-
>>
>> and ran qemu by the following command:
>>
>> qemu-system-arm -M versatilepb -m 128M -nographic -kernel ./u-boot.bin
>>
>> Output:
>>
>> qemu: fatal: Trying to execute code outside RAM or ROM at 0xffff07bc
>
> I cannot see how this problem would be related to the ELDK, so I think
> you are off topic here.
>
> You can get much better help for U-Boot related issues when posting on
> the appropriate mailing list (which in this case is the U-Boot mailing
> list).
>
> Thanks.
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> The more we disagree, the more chance there is that at least  one  of
> us is right.



-- 
Regards,
Sarbojit