[ELDK] Booting ELDK5.4 rootfs via NFS hangs

[Fabio Estevam]

On Sat, Nov 16, 2013 at 11:11 AM, Fabio Estevam <festevam at gmail.com> wrote:
> On Sat, Nov 16, 2013 at 11:06 AM, Tobias Markow
> <tobias.markow at haw-hamburg.de> wrote:
>
>> I can't use the UART0 on my evaluation board. I don't understand why this
>> should cause the hang, because the output is already done at ttyAPP3?!
>
> Ok, understood.
>
> Please check if your /etc/inittab is pointing to ttyAMA0. If so, then
> please change it to ttyAPP3.

Or just change the SERIAL_CONSOLE in your board .conf to point to the
correct ttyAPP3 port.

Regards,

Fabio Estevam