DRAM failed when booting U-boot 2009.03

[Heiko Schocher]

Hello Gurit,

On 02.07.22 19:40, Gurit Perdana wrote:
> 
> Hi Christophe,
> 
> Thank you for your response. It is working with same version of U-boot. If it is hardware failure,
> should I replace the DRAMs only? 

In the first step, yes. We can only speculate here...

> I look forward to hearing from you. 

Yes, if it run for years with the same u-boot version, I sounds like
a DRAM failure...

bye,
Heiko
> Best regards,
> 
> Gurit Perdana
> 
> 
> On Sun, Jul 3, 2022, 00:32 Christophe Leroy <christophe.leroy at csgroup.eu
> <mailto:christophe.leroy at csgroup.eu>> wrote:
> 
>     Hi
> 
>     Le 02/07/2022 à 19:20, Gurit Perdana a écrit :
>     > Hello Heiko,
>     >
>     > Thank you for your email. Have you gotten same problem before? Just for
>     > your information, the board was working for years.
> 
>     Was it working for years with the same version of U-boot ?
> 
>     If yes it is likely a hardware failure.
> 
>     If not, you should try with latest version of U-boot.
> 
>     Christophe
> 
> 
>     >
>     > Best regards,
>     >
>     > Gurit Perdana
>     >
>     >
>     >
>     > On Mon, Jun 27, 2022, 20:16 Heiko Schocher <hs at denx.de <mailto:hs at denx.de>
>     > <mailto:hs at denx.de <mailto:hs at denx.de>>> wrote:
>     >
>     >     Hello Gurit Perdana
>     >
>     >     On 24.06.22 09:46, Gurit Perdana wrote:
>     >      >
>     >      >
>     >      > Hi All,
>     >      >
>     >      >
>     >      >
>     >      > I have an error MPX8349 R5 V15 A2. I will show you my error
>     >     below. What should I do to solve this?
>     >      >
>     >      > I am looking forward to hearing from you. Thank you.
>     >
>     >     It seems you have problems with your DRAM setup... you need a debugger
>     >     to look whats going on...
>     >
>     >     bye,
>     >     Heiko
>     >     --
>     >     DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>     >     HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>     >     Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email:
>     >     hs at denx.de <mailto:hs at denx.de> <mailto:hs at denx.de <mailto:hs at denx.de>>
>     > 
> 

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de