DRAM failed when booting U-boot 2009.03

[Matthias Brugger]

On 02/07/2022 19:40, Gurit Perdana wrote:
> 
> Hi Christophe,
> 
> Thank you for your response. It is working with same version of U-boot. If it is 
> hardware failure, should I replace the DRAMs only?

Do I understand that you didn't flashed a new U-Boot binary but the version one 
it used to work for years now is not working anymore? In this case it's most 
likely a HW/DRAM problem.

For me that wasn't clear from your message.

Regards,
Matthias

> I look forward to hearing from you.
> 
> Best regards,
> 
> Gurit Perdana
> 
> 
> On Sun, Jul 3, 2022, 00:32 Christophe Leroy <christophe.leroy at csgroup.eu 
> <mailto:christophe.leroy at csgroup.eu>> wrote:
> 
>     Hi
> 
>     Le 02/07/2022 à 19:20, Gurit Perdana a écrit :
>      > Hello Heiko,
>      >
>      > Thank you for your email. Have you gotten same problem before? Just for
>      > your information, the board was working for years.
> 
>     Was it working for years with the same version of U-boot ?
> 
>     If yes it is likely a hardware failure.
> 
>     If not, you should try with latest version of U-boot.
> 
>     Christophe
> 
> 
>      >
>      > Best regards,
>      >
>      > Gurit Perdana
>      >
>      >
>      >
>      > On Mon, Jun 27, 2022, 20:16 Heiko Schocher <hs at denx.de <mailto:hs at denx.de>
>      > <mailto:hs at denx.de <mailto:hs at denx.de>>> wrote:
>      >
>      >     Hello Gurit Perdana
>      >
>      >     On 24.06.22 09:46, Gurit Perdana wrote:
>      >      >
>      >      >
>      >      > Hi All,
>      >      >
>      >      >
>      >      >
>      >      > I have an error MPX8349 R5 V15 A2. I will show you my error
>      >     below. What should I do to solve this?
>      >      >
>      >      > I am looking forward to hearing from you. Thank you.
>      >
>      >     It seems you have problems with your DRAM setup... you need a debugger
>      >     to look whats going on...
>      >
>      >     bye,
>      >     Heiko
>      >     --
>      >     DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>      >     HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>      >     Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email:
>      > hs at denx.de <mailto:hs at denx.de> <mailto:hs at denx.de <mailto:hs at denx.de>>
>      > 
>